kernel/linux.git/include/net/bluetooth, branch v6.6.27

Bluetooth: Add new quirk for broken read key length on ATS2851

2024-04-13T11:07:33+00:00

[ Upstream commit 48201a3b3f398be6a01f78a14b18bd5d31c47458 ] The ATS2851 controller erroneously reports support for the "Read Encryption Key Length" HCI command. This makes it unable to connect to any devices, since this command is issued by the kernel during the connection process in response to an "Encryption Change" HCI event. Add a new quirk (HCI_QUIRK_BROKEN_ENC_KEY_SIZE) to hint that the command is unsupported, preventing it from interrupting the connection process. This is the error log from btmon before this patch: > HCI Event: Encryption Change (0x08) plen 4 Status: Success (0x00) Handle: 2048 Address: ... Encryption: Enabled with E0 (0x01) < HCI Command: Read Encryption Key Size (0x05|0x0008) plen 2 Handle: 2048 Address: ... > HCI Event: Command Status (0x0f) plen 4 Read Encryption Key Size (0x05|0x0008) ncmd 1 Status: Unknown HCI Command (0x01) Signed-off-by: Vinicius Peixoto Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

Bluetooth: add quirk for broken address properties

2024-04-10T14:35:48+00:00

commit 39646f29b100566451d37abc4cc8cdd583756dfe upstream. Some Bluetooth controllers lack persistent storage for the device address and instead one can be provided by the boot firmware using the 'local-bd-address' devicetree property. The Bluetooth devicetree bindings clearly states that the address should be specified in little-endian order, but due to a long-standing bug in the Qualcomm driver which reversed the address some boot firmware has been providing the address in big-endian order instead. Add a new quirk that can be set on platforms with broken firmware and use it to reverse the address when parsing the property so that the underlying driver bug can be fixed. Fixes: 5c0a1001c8be ("Bluetooth: hci_qca: Add helper to set device address") Cc: stable@vger.kernel.org # 5.1 Reviewed-by: Douglas Anderson Signed-off-by: Johan Hovold Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman

Bluetooth: hci_sync: Fix overwriting request callback

2024-03-26T22:19:38+00:00

[ Upstream commit 2615fd9a7c2507eb3be3fbe49dcec88a2f56454a ] In a few cases the stack may generate commands as responses to events which would happen to overwrite the sent_cmd, so this attempts to store the request in req_skb so even if sent_cmd is replaced with a new command the pending request will remain in stored in req_skb. Fixes: 6a98e3836fa2 ("Bluetooth: Add helper for serialized HCI command execution") Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

Bluetooth: hci_core: Cancel request on command timeout

2024-03-26T22:19:37+00:00

[ Upstream commit 63298d6e752fc0ec7f5093860af8bc9f047b30c8 ] If command has timed out call __hci_cmd_sync_cancel to notify the hci_req since it will inevitably cause a timeout. This also rework the code around __hci_cmd_sync_cancel since it was wrongly assuming it needs to cancel timer as well, but sometimes the timers have not been started or in fact they already had timed out in which case they don't need to be cancel yet again. Signed-off-by: Luiz Augusto von Dentz Stable-dep-of: 2615fd9a7c25 ("Bluetooth: hci_sync: Fix overwriting request callback") Signed-off-by: Sasha Levin

Bluetooth: Remove BT_HS

2024-03-26T22:19:37+00:00

[ Upstream commit e7b02296fb400ee64822fbdd81a0718449066333 ] High Speed, Alternate MAC and PHY (AMP) extension, has been removed from Bluetooth Core specification on 5.3: https://www.bluetooth.com/blog/new-core-specification-v5-3-feature-enhancements/ Fixes: 244bc377591c ("Bluetooth: Add BT_HS config option") Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

Bluetooth: Remove HCI_POWER_OFF_TIMEOUT

2024-03-26T22:19:37+00:00

[ Upstream commit 968667f2e0345a67a6eea5a502f4659085666564 ] With commit cf75ad8b41d2 ("Bluetooth: hci_sync: Convert MGMT_SET_POWERED"), the power off sequence got refactored so that this timeout was no longer necessary, let's remove the leftover define from the header too. Fixes: cf75ad8b41d2 ("Bluetooth: hci_sync: Convert MGMT_SET_POWERED") Signed-off-by: Jonas Dreßler Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

Bluetooth: Fix bogus check for re-auth no supported with non-ssp

2024-01-25T23:35:29+00:00

[ Upstream commit d03376c185926098cb4d668d6458801eb785c0a5 ] This reverts 19f8def031bfa50c579149b200bfeeb919727b27 "Bluetooth: Fix auth_complete_evt for legacy units" which seems to be working around a bug on a broken controller rather then any limitation imposed by the Bluetooth spec, in fact if there ws not possible to re-auth the command shall fail not succeed. Fixes: 19f8def031bf ("Bluetooth: Fix auth_complete_evt for legacy units") Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE

2024-01-01T12:42:40+00:00

commit 59b047bc98084f8af2c41483e4d68a5adf2fa7f7 upstream. If two Bluetooth devices both support BR/EDR and BLE, and also support Secure Connections, then they only need to pair once. The LTK generated during the LE pairing process may be converted into a BR/EDR link key for BR/EDR transport, and conversely, a link key generated during the BR/EDR SSP pairing process can be converted into an LTK for LE transport. Hence, the link type of the link key and LTK is not fixed, they can be either an LE LINK or an ACL LINK. Currently, in the mgmt_new_irk/ltk/crsk/link_key functions, the link type is fixed, which could lead to incorrect address types being reported to the application layer. Therefore, it is necessary to add link_type/addr_type to the smp_irk/ltk/crsk and link_key, to ensure the generation of the correct address type. SMP over BREDR: Before Fix: > ACL Data RX: Handle 11 flags 0x02 dlen 12 BR/EDR SMP: Identity Address Information (0x09) len 7 Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76) @ MGMT Event: New Identity Resolving Key (0x0018) plen 30 Random address: 00:00:00:00:00:00 (Non-Resolvable) LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76) @ MGMT Event: New Long Term Key (0x000a) plen 37 LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76) Key type: Authenticated key from P-256 (0x03) After Fix: > ACL Data RX: Handle 11 flags 0x02 dlen 12 BR/EDR SMP: Identity Address Information (0x09) len 7 Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76) @ MGMT Event: New Identity Resolving Key (0x0018) plen 30 Random address: 00:00:00:00:00:00 (Non-Resolvable) BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76) @ MGMT Event: New Long Term Key (0x000a) plen 37 BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76) Key type: Authenticated key from P-256 (0x03) SMP over LE: Before Fix: @ MGMT Event: New Identity Resolving Key (0x0018) plen 30 Random address: 5F:5C:07:37:47:D5 (Resolvable) LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76) @ MGMT Event: New Long Term Key (0x000a) plen 37 LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76) Key type: Authenticated key from P-256 (0x03) @ MGMT Event: New Link Key (0x0009) plen 26 BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76) Key type: Authenticated Combination key from P-256 (0x08) After Fix: @ MGMT Event: New Identity Resolving Key (0x0018) plen 30 Random address: 5E:03:1C:00:38:21 (Resolvable) LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76) @ MGMT Event: New Long Term Key (0x000a) plen 37 LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76) Key type: Authenticated key from P-256 (0x03) @ MGMT Event: New Link Key (0x0009) plen 26 Store hint: Yes (0x01) LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76) Key type: Authenticated Combination key from P-256 (0x08) Cc: stable@vger.kernel.org Signed-off-by: Xiao Yao Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman

Bluetooth: hci_core: Fix hci_conn_hash_lookup_cis

2024-01-01T12:42:31+00:00

[ Upstream commit 50efc63d1a7a7b9a6ed21adae1b9a7123ec8abc0 ] hci_conn_hash_lookup_cis shall always match the requested CIG and CIS ids even when they are unset as otherwise it result in not being able to bind/connect different sockets to the same address as that would result in having multiple sockets mapping to the same hci_conn which doesn't really work and prevents BAP audio configuration such as AC 6(i) when CIG and CIS are left unset. Fixes: c14516faede3 ("Bluetooth: hci_conn: Fix not matching by CIS ID") Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

Bluetooth: Make handle of hci_conn be unique

2023-11-20T10:59:03+00:00

[ Upstream commit 181a42edddf51d5d9697ecdf365d72ebeab5afb0 ] The handle of new hci_conn is always HCI_CONN_HANDLE_MAX + 1 if the handle of the first hci_conn entry in hci_dev->conn_hash->list is not HCI_CONN_HANDLE_MAX + 1. Use ida to manage the allocation of hci_conn->handle to make it be unique. Fixes: 9f78191cc9f1 ("Bluetooth: hci_conn: Always allocate unique handles") Signed-off-by: Ziyang Xuan Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin