kernel/linux.git/include/net/bluetooth, branch v4.4.243

Bluetooth: Disconnect if E0 is used for Level 4

2020-10-17T09:03:30+00:00

commit 8746f135bb01872ff412d408ea1aa9ebd328c1f5 upstream. E0 is not allowed with Level 4: BLUETOOTH CORE SPECIFICATION Version 5.2 | Vol 3, Part C page 1319: '128-bit equivalent strength for link and encryption keys required using FIPS approved algorithms (E0 not allowed, SAFER+ not allowed, and P-192 not allowed; encryption key not shortened' SC enabled: > HCI Event: Read Remote Extended Features (0x23) plen 13 Status: Success (0x00) Handle: 256 Page: 1/2 Features: 0x0b 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Secure Simple Pairing (Host Support) LE Supported (Host) Secure Connections (Host Support) > HCI Event: Encryption Change (0x08) plen 4 Status: Success (0x00) Handle: 256 Encryption: Enabled with AES-CCM (0x02) SC disabled: > HCI Event: Read Remote Extended Features (0x23) plen 13 Status: Success (0x00) Handle: 256 Page: 1/2 Features: 0x03 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Secure Simple Pairing (Host Support) LE Supported (Host) > HCI Event: Encryption Change (0x08) plen 4 Status: Success (0x00) Handle: 256 Encryption: Enabled with E0 (0x01) [May 8 20:23] Bluetooth: hci0: Invalid security: expect AES but E0 was used < HCI Command: Disconnect (0x01|0x0006) plen 3 Handle: 256 Reason: Authentication Failure (0x05) Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Marcel Holtmann Cc: Hans-Christian Noren Egtvedt Signed-off-by: Greg Kroah-Hartman

Bluetooth: Fix update of connection state in `hci_encrypt_cfm`

2020-10-17T09:03:30+00:00

commit 339ddaa626995bc6218972ca241471f3717cc5f4 upstream. Starting with the upgrade to v5.8-rc3, I've noticed I wasn't able to connect to my Bluetooth headset properly anymore. While connecting to the device would eventually succeed, bluetoothd seemed to be confused about the current connection state where the state was flapping hence and forth. Bisecting this issue led to commit 3ca44c16b0dc (Bluetooth: Consolidate encryption handling in hci_encrypt_cfm, 2020-05-19), which refactored `hci_encrypt_cfm` to also handle updating the connection state. The commit in question changed the code to call `hci_connect_cfm` inside `hci_encrypt_cfm` and to change the connection state. But with the conversion, we now only update the connection state if a status was set already. In fact, the reverse should be true: the status should be updated if no status is yet set. So let's fix the isuse by reversing the condition. Fixes: 3ca44c16b0dc ("Bluetooth: Consolidate encryption handling in hci_encrypt_cfm") Signed-off-by: Patrick Steinhardt Acked-by: Luiz Augusto von Dentz Signed-off-by: Marcel Holtmann Signed-off-by: Greg Kroah-Hartman

Bluetooth: Consolidate encryption handling in hci_encrypt_cfm

2020-10-17T09:03:30+00:00

commit 3ca44c16b0dcc764b641ee4ac226909f5c421aa3 upstream. This makes hci_encrypt_cfm calls hci_connect_cfm in case the connection state is BT_CONFIG so callers don't have to check the state. Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Marcel Holtmann Cc: Hans-Christian Noren Egtvedt Signed-off-by: Greg Kroah-Hartman

Bluetooth: Align minimum encryption key size for LE and BR/EDR connections

2019-07-10T07:56:33+00:00

commit d5bb334a8e171b262e48f378bd2096c0ea458265 upstream. The minimum encryption key size for LE connections is 56 bits and to align LE with BR/EDR, enforce 56 bits of minimum encryption key size for BR/EDR connections as well. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

Revert "Bluetooth: Align minimum encryption key size for LE and BR/EDR connections"

2019-06-22T06:18:22+00:00

This reverts commit d016dc1bd29a2cfb0707fc6fb290ccd21f3b139c which is commit d5bb334a8e171b262e48f378bd2096c0ea458265 upstream. Lots of people have reported issues with this patch, and as there does not seem to be a fix going into Linus's kernel tree any time soon, revert the commit in the stable trees so as to get people's machines working properly again. Reported-by: Vasily Khoruzhick Reported-by: Hans de Goede Cc: Jeremy Cline Cc: Marcel Holtmann Cc: Johan Hedberg Signed-off-by: Greg Kroah-Hartman

Bluetooth: Align minimum encryption key size for LE and BR/EDR connections

2019-05-16T17:45:04+00:00

Bluetooth: Fix connection if directed advertising and privacy is used

2018-07-03T09:21:35+00:00

commit 082f2300cfa1a3d9d5221c38c5eba85d4ab98bd8 upstream. Local random address needs to be updated before creating connection if RPA from LE Direct Advertising Report was resolved in host. Otherwise remote device might ignore connection request due to address mismatch. This was affecting following qualification test cases: GAP/CONN/SCEP/BV-03-C, GAP/CONN/GCEP/BV-05-C, GAP/CONN/DCEP/BV-05-C Before patch: < HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #11350 [hci0] 84680.231216 Address: 56:BC:E8:24:11:68 (Resolvable) Identity type: Random (0x01) Identity: F2:F1:06:3D:9C:42 (Static) > HCI Event: Command Complete (0x0e) plen 4 #11351 [hci0] 84680.246022 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #11352 [hci0] 84680.246417 Type: Passive (0x00) Interval: 60.000 msec (0x0060) Window: 30.000 msec (0x0030) Own address type: Random (0x01) Filter policy: Accept all advertisement, inc. directed unresolved RPA (0x02) > HCI Event: Command Complete (0x0e) plen 4 #11353 [hci0] 84680.248854 LE Set Scan Parameters (0x08|0x000b) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #11354 [hci0] 84680.249466 Scanning: Enabled (0x01) Filter duplicates: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 #11355 [hci0] 84680.253222 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 18 #11356 [hci0] 84680.458387 LE Direct Advertising Report (0x0b) Num reports: 1 Event type: Connectable directed - ADV_DIRECT_IND (0x01) Address type: Random (0x01) Address: 53:38:DA:46:8C:45 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Direct address type: Random (0x01) Direct address: 7C:D6:76:8C:DF:82 (Resolvable) Identity type: Random (0x01) Identity: F2:F1:06:3D:9C:42 (Static) RSSI: -74 dBm (0xb6) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #11357 [hci0] 84680.458737 Scanning: Disabled (0x00) Filter duplicates: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 4 #11358 [hci0] 84680.469982 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection (0x08|0x000d) plen 25 #11359 [hci0] 84680.470444 Scan interval: 60.000 msec (0x0060) Scan window: 60.000 msec (0x0060) Filter policy: White list is not used (0x00) Peer address type: Random (0x01) Peer address: 53:38:DA:46:8C:45 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Own address type: Random (0x01) Min connection interval: 30.00 msec (0x0018) Max connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Status (0x0f) plen 4 #11360 [hci0] 84680.474971 LE Create Connection (0x08|0x000d) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection Cancel (0x08|0x000e) plen 0 #11361 [hci0] 84682.545385 > HCI Event: Command Complete (0x0e) plen 4 #11362 [hci0] 84682.551014 LE Create Connection Cancel (0x08|0x000e) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 19 #11363 [hci0] 84682.551074 LE Connection Complete (0x01) Status: Unknown Connection Identifier (0x02) Handle: 0 Role: Master (0x00) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Connection interval: 0.00 msec (0x0000) Connection latency: 0 (0x0000) Supervision timeout: 0 msec (0x0000) Master clock accuracy: 0x00 After patch: < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #210 [hci0] 667.152459 Type: Passive (0x00) Interval: 60.000 msec (0x0060) Window: 30.000 msec (0x0030) Own address type: Random (0x01) Filter policy: Accept all advertisement, inc. directed unresolved RPA (0x02) > HCI Event: Command Complete (0x0e) plen 4 #211 [hci0] 667.153613 LE Set Scan Parameters (0x08|0x000b) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #212 [hci0] 667.153704 Scanning: Enabled (0x01) Filter duplicates: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 #213 [hci0] 667.154584 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 18 #214 [hci0] 667.182619 LE Direct Advertising Report (0x0b) Num reports: 1 Event type: Connectable directed - ADV_DIRECT_IND (0x01) Address type: Random (0x01) Address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Direct address type: Random (0x01) Direct address: 7C:C1:57:A5:B7:A8 (Resolvable) Identity type: Random (0x01) Identity: F4:28:73:5D:38:B0 (Static) RSSI: -70 dBm (0xba) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #215 [hci0] 667.182704 Scanning: Disabled (0x00) Filter duplicates: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 4 #216 [hci0] 667.183599 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #217 [hci0] 667.183645 Address: 7C:C1:57:A5:B7:A8 (Resolvable) Identity type: Random (0x01) Identity: F4:28:73:5D:38:B0 (Static) > HCI Event: Command Complete (0x0e) plen 4 #218 [hci0] 667.184590 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection (0x08|0x000d) plen 25 #219 [hci0] 667.184613 Scan interval: 60.000 msec (0x0060) Scan window: 60.000 msec (0x0060) Filter policy: White list is not used (0x00) Peer address type: Random (0x01) Peer address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Own address type: Random (0x01) Min connection interval: 30.00 msec (0x0018) Max connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Status (0x0f) plen 4 #220 [hci0] 667.186558 LE Create Connection (0x08|0x000d) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 19 #221 [hci0] 667.485824 LE Connection Complete (0x01) Status: Success (0x00) Handle: 0 Role: Master (0x00) Peer address type: Random (0x01) Peer address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Master clock accuracy: 0x07 @ MGMT Event: Device Connected (0x000b) plen 13 {0x0002} [hci0] 667.485996 LE Address: 11:22:33:44:55:66 (OUI 11-22-33) Flags: 0x00000000 Data length: 0 Signed-off-by: Szymon Janc Signed-off-by: Marcel Holtmann Cc: stable@vger.kernel.org Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

Bluetooth: L2CAP: Fix returning correct LE CoC response codes

2015-11-05T03:04:00+00:00

The core spec defines specific response codes for situations when the received CID is incorrect. Add the defines for these and return them as appropriate from the LE Connect Request handler function. Signed-off-by: Johan Hedberg Signed-off-by: Marcel Holtmann

Bluetooth: Rename bt_cb()->req into bt_cb()->hci

2015-10-26T06:21:03+00:00

The SKB context buffer for HCI request is really not just for requests, information in their are preserved for the whole HCI layer. So it makes more sense to actually rename it into bt_cb()->hci and also call it then struct hci_ctrl. In addition that allows moving the decoded opcode for outgoing packets into that struct. So far it was just consuming valuable space from the main shared items. And opcode are not valid for L2CAP packets. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg

Bluetooth: Remove unnecessary hci_explicit_connect_lookup function

2015-10-21T16:58:23+00:00

There's only one user of this helper which can be replaces with a call to hci_pend_le_action_lookup() and a check for params->explicit_connect. Signed-off-by: Johan Hedberg Signed-off-by: Marcel Holtmann