kernel/linux.git/include/net/bluetooth/l2cap.h, branch v6.12.80

Bluetooth: L2CAP: Fix result of L2CAP_ECRED_CONN_RSP when MTU is too short

2026-03-04T12:21:32+00:00

[ Upstream commit c28d2bff70444a85b3b86aaf241ece9408c7858c ] Test L2CAP/ECFC/BV-26-C expect the response to L2CAP_ECRED_CONN_REQ with and MTU value < L2CAP_ECRED_MIN_MTU (64) to be L2CAP_CR_LE_INVALID_PARAMS rather than L2CAP_CR_LE_UNACCEPT_PARAMS. Also fix not including the correct number of CIDs in the response since the spec requires all CIDs being rejected to be included in the response. Link: https://github.com/bluez/bluez/issues/1868 Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode") Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

Bluetooth: L2CAP: Fix invalid response to L2CAP_ECRED_RECONF_REQ

2026-03-04T12:21:32+00:00

[ Upstream commit 7accb1c4321acb617faf934af59d928b0b047e2b ] This fixes responding with an invalid result caused by checking the wrong size of CID which should have been (cmd_len - sizeof(*req)) and on top of it the wrong result was use L2CAP_CR_LE_INVALID_PARAMS which is invalid/reserved for reconf when running test like L2CAP/ECFC/BI-03-C: > ACL Data RX: Handle 64 flags 0x02 dlen 14 LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6 MTU: 64 MPS: 64 Source CID: 64 < ACL Data TX: Handle 64 flags 0x00 dlen 10 LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2 ! Result: Reserved (0x000c) Result: Reconfiguration failed - one or more Destination CIDs invalid (0x0003) Fiix L2CAP/ECFC/BI-04-C which expects L2CAP_RECONF_INVALID_MPS (0x0002) when more than one channel gets its MPS reduced: > ACL Data RX: Handle 64 flags 0x02 dlen 16 LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 8 MTU: 264 MPS: 99 Source CID: 64 ! Source CID: 65 < ACL Data TX: Handle 64 flags 0x00 dlen 10 LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2 ! Result: Reconfiguration successful (0x0000) Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002) Fix L2CAP/ECFC/BI-05-C when SCID is invalid (85 unconnected): > ACL Data RX: Handle 64 flags 0x02 dlen 14 LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6 MTU: 65 MPS: 64 ! Source CID: 85 < ACL Data TX: Handle 64 flags 0x00 dlen 10 LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2 ! Result: Reconfiguration successful (0x0000) Result: Reconfiguration failed - one or more Destination CIDs invalid (0x0003) Fix L2CAP/ECFC/BI-06-C when MPS < L2CAP_ECRED_MIN_MPS (64): > ACL Data RX: Handle 64 flags 0x02 dlen 14 LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6 MTU: 672 ! MPS: 63 Source CID: 64 < ACL Data TX: Handle 64 flags 0x00 dlen 10 LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2 ! Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002) Result: Reconfiguration failed - other unacceptable parameters (0x0004) Fix L2CAP/ECFC/BI-07-C when MPS reduced for more than one channel: > ACL Data RX: Handle 64 flags 0x02 dlen 16 LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 3 len 8 MTU: 84 ! MPS: 71 Source CID: 64 ! Source CID: 65 < ACL Data TX: Handle 64 flags 0x00 dlen 10 LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2 ! Result: Reconfiguration successful (0x0000) Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002) Link: https://github.com/bluez/bluez/issues/1865 Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode") Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

Bluetooth: L2CAP: Fix corrupted list in hci_chan_del

2025-03-22T19:54:28+00:00

commit ab4eedb790cae44313759b50fe47da285e2519d5 upstream. This fixes the following trace by reworking the locking of l2cap_conn so instead of only locking when changing the chan_l list this promotes chan_lock to a general lock of l2cap_conn so whenever it is being held it would prevents the likes of l2cap_conn_del to run: list_del corruption, ffff888021297e00->prev is LIST_POISON2 (dead000000000122) ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:61! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 UID: 0 PID: 5896 Comm: syz-executor213 Not tainted 6.14.0-rc1-next-20250204-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 12/27/2024 RIP: 0010:__list_del_entry_valid_or_report+0x12c/0x190 lib/list_debug.c:59 Code: 8c 4c 89 fe 48 89 da e8 32 8c 37 fc 90 0f 0b 48 89 df e8 27 9f 14 fd 48 c7 c7 a0 c0 60 8c 4c 89 fe 48 89 da e8 15 8c 37 fc 90 <0f> 0b 4c 89 e7 e8 0a 9f 14 fd 42 80 3c 2b 00 74 08 4c 89 e7 e8 cb RSP: 0018:ffffc90003f6f998 EFLAGS: 00010246 RAX: 000000000000004e RBX: dead000000000122 RCX: 01454d423f7fbf00 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: dffffc0000000000 R08: ffffffff819f077c R09: 1ffff920007eded0 R10: dffffc0000000000 R11: fffff520007eded1 R12: dead000000000122 R13: dffffc0000000000 R14: ffff8880352248d8 R15: ffff888021297e00 FS: 00007f7ace6686c0(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7aceeeb1d0 CR3: 000000003527c000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __list_del_entry_valid include/linux/list.h:124 [inline] __list_del_entry include/linux/list.h:215 [inline] list_del_rcu include/linux/rculist.h:168 [inline] hci_chan_del+0x70/0x1b0 net/bluetooth/hci_conn.c:2858 l2cap_conn_free net/bluetooth/l2cap_core.c:1816 [inline] kref_put include/linux/kref.h:65 [inline] l2cap_conn_put+0x70/0xe0 net/bluetooth/l2cap_core.c:1830 l2cap_sock_shutdown+0xa8a/0x1020 net/bluetooth/l2cap_sock.c:1377 l2cap_sock_release+0x79/0x1d0 net/bluetooth/l2cap_sock.c:1416 __sock_release net/socket.c:642 [inline] sock_close+0xbc/0x240 net/socket.c:1393 __fput+0x3e9/0x9f0 fs/file_table.c:448 task_work_run+0x24f/0x310 kernel/task_work.c:227 ptrace_notify+0x2d2/0x380 kernel/signal.c:2522 ptrace_report_syscall include/linux/ptrace.h:415 [inline] ptrace_report_syscall_exit include/linux/ptrace.h:477 [inline] syscall_exit_work+0xc7/0x1d0 kernel/entry/common.c:173 syscall_exit_to_user_mode_prepare kernel/entry/common.c:200 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:205 [inline] syscall_exit_to_user_mode+0x24a/0x340 kernel/entry/common.c:218 do_syscall_64+0x100/0x230 arch/x86/entry/common.c:89 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f7aceeaf449 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f7ace668218 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: fffffffffffffffc RBX: 00007f7acef39328 RCX: 00007f7aceeaf449 RDX: 000000000000000e RSI: 0000000020000100 RDI: 0000000000000004 RBP: 00007f7acef39320 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003 R13: 0000000000000004 R14: 00007f7ace668670 R15: 000000000000000b Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:__list_del_entry_valid_or_report+0x12c/0x190 lib/list_debug.c:59 Code: 8c 4c 89 fe 48 89 da e8 32 8c 37 fc 90 0f 0b 48 89 df e8 27 9f 14 fd 48 c7 c7 a0 c0 60 8c 4c 89 fe 48 89 da e8 15 8c 37 fc 90 <0f> 0b 4c 89 e7 e8 0a 9f 14 fd 42 80 3c 2b 00 74 08 4c 89 e7 e8 cb RSP: 0018:ffffc90003f6f998 EFLAGS: 00010246 RAX: 000000000000004e RBX: dead000000000122 RCX: 01454d423f7fbf00 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: dffffc0000000000 R08: ffffffff819f077c R09: 1ffff920007eded0 R10: dffffc0000000000 R11: fffff520007eded1 R12: dead000000000122 R13: dffffc0000000000 R14: ffff8880352248d8 R15: ffff888021297e00 FS: 00007f7ace6686c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7acef05b08 CR3: 000000003527c000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Reported-by: syzbot+10bd8fe6741eedd2be2e@syzkaller.appspotmail.com Tested-by: syzbot+10bd8fe6741eedd2be2e@syzkaller.appspotmail.com Fixes: b4f82f9ed43a ("Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd") Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman

move asm/unaligned.h to linux/unaligned.h

2024-10-02T21:23:23+00:00

asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h

Bluetooth: L2CAP: Remove unused declarations

2024-09-10T17:04:43+00:00

Commit e7b02296fb40 ("Bluetooth: Remove BT_HS") removed the implementations but leave declarations. Signed-off-by: Yue Haibing Signed-off-by: Luiz Augusto von Dentz

Bluetooth: compute LE flow credits based on recvbuf space

2024-05-14T14:51:07+00:00

Previously LE flow credits were returned to the sender even if the socket's receive buffer was full. This meant that no back-pressure was applied to the sender, thus it continued to send data, resulting in data loss without any error being reported. Furthermore, the amount of credits was essentially fixed to a small amount, leading to reduced performance. This is fixed by computing the number of returned LE flow credits based on the estimated available space in the receive buffer of an L2CAP socket. Consequently, if the receive buffer is full, no credits are returned until the buffer is read and thus cleared by user-space. Since the computation of available receive buffer space can only be performed approximately (due to sk_buff overhead) and the receive buffer size may be changed by user-space after flow credits have been sent, superfluous received data is temporary stored within l2cap_pinfo. This is necessary because Bluetooth LE provides no retransmission mechanism once the data has been acked by the physical layer. If receive buffer space estimation is not possible at the moment, we fall back to providing credits for one full packet as before. This is currently the case during connection setup, when MPS is not yet available. Fixes: b1c325c23d75 ("Bluetooth: Implement returning of LE L2CAP credits") Signed-off-by: Sebastian Urban Signed-off-by: Luiz Augusto von Dentz

Bluetooth: L2CAP: Avoid -Wflex-array-member-not-at-end warnings

2024-05-14T14:51:04+00:00

-Wflex-array-member-not-at-end is coming in GCC-14, and we are getting ready to enable it globally. There are currently a couple of objects (`req` and `rsp`), in a couple of structures, that contain flexible structures (`struct l2cap_ecred_conn_req` and `struct l2cap_ecred_conn_rsp`), for example: struct l2cap_ecred_rsp_data { struct { struct l2cap_ecred_conn_rsp rsp; __le16 scid[L2CAP_ECRED_MAX_CID]; } __packed pdu; int count; }; in the struct above, `struct l2cap_ecred_conn_rsp` is a flexible structure: struct l2cap_ecred_conn_rsp { __le16 mtu; __le16 mps; __le16 credits; __le16 result; __le16 dcid[]; }; So, in order to avoid ending up with a flexible-array member in the middle of another structure, we use the `struct_group_tagged()` (and `__struct_group()` when the flexible structure is `__packed`) helper to separate the flexible array from the rest of the members in the flexible structure: struct l2cap_ecred_conn_rsp { struct_group_tagged(l2cap_ecred_conn_rsp_hdr, hdr, ... the rest of members ); __le16 dcid[]; }; With the change described above, we now declare objects of the type of the tagged struct, in this example `struct l2cap_ecred_conn_rsp_hdr`, without embedding flexible arrays in the middle of other structures: struct l2cap_ecred_rsp_data { struct { struct l2cap_ecred_conn_rsp_hdr rsp; __le16 scid[L2CAP_ECRED_MAX_CID]; } __packed pdu; int count; }; Also, when the flexible-array member needs to be accessed, we use `container_of()` to retrieve a pointer to the flexible structure. We also use the `DEFINE_RAW_FLEX()` helper for a couple of on-stack definitions of a flexible structure where the size of the flexible-array member is known at compile-time. So, with these changes, fix the following warnings: net/bluetooth/l2cap_core.c:1260:45: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] net/bluetooth/l2cap_core.c:3740:45: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] net/bluetooth/l2cap_core.c:4999:45: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] net/bluetooth/l2cap_core.c:7116:47: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] Link: https://github.com/KSPP/linux/issues/202 Signed-off-by: Gustavo A. R. Silva Signed-off-by: Luiz Augusto von Dentz

Bluetooth: hci_conn: Always use sk_timeo as conn_timeout

2024-03-06T22:22:41+00:00

This aligns the use socket sk_timeo as conn_timeout when initiating a connection and then use it when scheduling the resulting HCI command, that way the command is actually aborted synchronously thus not blocking commands generated by hci_abort_conn_sync to inform the controller the connection is to be aborted. Signed-off-by: Luiz Augusto von Dentz

Bluetooth: Remove BT_HS

2024-03-06T22:22:39+00:00

High Speed, Alternate MAC and PHY (AMP) extension, has been removed from Bluetooth Core specification on 5.3: https://www.bluetooth.com/blog/new-core-specification-v5-3-feature-enhancements/ Fixes: 244bc377591c ("Bluetooth: Add BT_HS config option") Signed-off-by: Luiz Augusto von Dentz

Bluetooth: L2CAP: Delay identity address updates

2023-04-24T04:48:44+00:00

This delays the identity address updates to give time for userspace to process the new address otherwise there is a risk that userspace creates a duplicated device if the MGMT event is delayed for some reason. Signed-off-by: Luiz Augusto von Dentz