kernel/linux.git/include/net/bluetooth/hci_core.h, branch v6.3

Bluetooth: Fix printing errors if LE Connection times out

2023-04-10T17:21:33+00:00

This fixes errors like bellow when LE Connection times out since that is actually not a controller error: Bluetooth: hci0: Opcode 0x200d failed: -110 Bluetooth: hci0: request failed to create LE connection: err -110 Instead the code shall properly detect if -ETIMEDOUT is returned and send HCI_OP_LE_CREATE_CONN_CANCEL to give up on the connection. Link: https://github.com/bluez/bluez/issues/340 Fixes: 8e8b92ee60de ("Bluetooth: hci_sync: Add hci_le_create_conn_sync") Signed-off-by: Luiz Augusto von Dentz

Bluetooth: btintel: Iterate only bluetooth device ACPI entries

2023-03-22T23:05:55+00:00

Current flow interates over entire ACPI table entries looking for Bluetooth Per Platform Antenna Gain(PPAG) entry. This patch iterates over ACPI entries relvant to Bluetooth device only. Fixes: c585a92b2f9c ("Bluetooth: btintel: Set Per Platform Antenna Gain(PPAG)") Signed-off-by: Kiran K Signed-off-by: Luiz Augusto von Dentz

Bluetooth: Add quirk to disable MWS Transport Configuration

2022-12-12T22:19:24+00:00

Broadcom 4378/4387 controllers found in Apple Silicon Macs claim to support getting MWS Transport Layer Configuration, < HCI Command: Read Local Supported... (0x04|0x0002) plen 0 > HCI Event: Command Complete (0x0e) plen 68 Read Local Supported Commands (0x04|0x0002) ncmd 1 Status: Success (0x00) [...] Get MWS Transport Layer Configuration (Octet 30 - Bit 3)] [...] , but then don't actually allow the required command: > HCI Event: Command Complete (0x0e) plen 15 Get MWS Transport Layer Configuration (0x05|0x000c) ncmd 1 Status: Command Disallowed (0x0c) Number of transports: 0 Baud rate list: 0 entries 00 00 00 00 00 00 00 00 00 00 Signed-off-by: Sven Peter Signed-off-by: Luiz Augusto von Dentz

Bluetooth: Add quirk to disable extended scanning

2022-12-12T22:19:24+00:00

Broadcom 4377 controllers found in Apple x86 Macs with the T2 chip claim to support extended scanning when querying supported states, < HCI Command: LE Read Supported St.. (0x08|0x001c) plen 0 > HCI Event: Command Complete (0x0e) plen 12 LE Read Supported States (0x08|0x001c) ncmd 1 Status: Success (0x00) States: 0x000003ffffffffff [...] LE Set Extended Scan Parameters (Octet 37 - Bit 5) LE Set Extended Scan Enable (Octet 37 - Bit 6) [...] , but then fail to actually implement the extended scanning: < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 Own address type: Random (0x01) Filter policy: Accept all advertisement (0x00) PHYs: 0x01 Entry 0: LE 1M Type: Active (0x01) Interval: 11.250 msec (0x0012) Window: 11.250 msec (0x0012) > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Unknown HCI Command (0x01) Signed-off-by: Sven Peter Signed-off-by: Luiz Augusto von Dentz

Bluetooth: btusb: Introduce generic USB reset

2022-12-12T22:19:23+00:00

On cmd_timeout with no reset_gpio, reset the USB port as a last resort. This patch changes the behavior of btusb_intel_cmd_timeout and btusb_rtl_cmd_timeout. Signed-off-by: Archie Pusaka Reviewed-by: Abhishek Pandit-Subedi Reviewed-by: Ying Hsu Signed-off-by: Luiz Augusto von Dentz

Bluetooth: Implement support for Mesh

2022-09-06T20:18:24+00:00

The patch adds state bits, storage and HCI command chains for sending and receiving Bluetooth Mesh advertising packets, and delivery to requesting user space processes. It specifically creates 4 new MGMT commands and 2 new MGMT events: MGMT_OP_SET_MESH_RECEIVER - Sets passive scan parameters and a list of AD Types which will trigger Mesh Packet Received events MGMT_OP_MESH_READ_FEATURES - Returns information on how many outbound Mesh packets can be simultaneously queued, and what the currently queued handles are. MGMT_OP_MESH_SEND - Command to queue a specific outbound Mesh packet, with the number of times it should be sent, and the BD Addr to use. Discrete advertisments are added to the ADV Instance list. MGMT_OP_MESH_SEND_CANCEL - Command to cancel a prior outbound message request. MGMT_EV_MESH_DEVICE_FOUND - Event to deliver entire received Mesh Advertisement packet, along with timing information. MGMT_EV_MESH_PACKET_CMPLT - Event to indicate that an outbound packet is no longer queued for delivery. Signed-off-by: Brian Gix Signed-off-by: Luiz Augusto von Dentz

Bluetooth: Move hci_abort_conn to hci_conn.c

2022-08-31T22:45:56+00:00

hci_abort_conn() is a wrapper around a number of DISCONNECT and CREATE_CONN_CANCEL commands that was being invoked from hci_request request queues, which are now deprecated. There are two versions: hci_abort_conn() which can be invoked from the hci_event thread, and hci_abort_conn_sync() which can be invoked within a hci_sync cmd chain. Signed-off-by: Brian Gix Signed-off-by: Luiz Augusto von Dentz

Bluetooth: Add initial implementation of BIS connections

2022-07-23T00:13:56+00:00

This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz

Bluetooth: Add BTPROTO_ISO socket type

2022-07-23T00:13:39+00:00

This introduces a new socket type BTPROTO_ISO which can be enabled with use of ISO Socket experiemental UUID, it can used to initiate/accept connections and transfer packets between userspace and kernel similarly to how BTPROTO_SCO works: Central -> uses connect with address set to destination bdaddr: > tools/isotest -s 00:AA:01:00:00:00 Peripheral -> uses listen: > tools/isotest -d Signed-off-by: Luiz Augusto von Dentz

Bluetooth: Add initial implementation of CIS connections

2022-07-23T00:13:22+00:00

This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s

< HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz