kernel/linux.git/include/net/bluetooth/bluetooth.h, branch v6.6.14

Bluetooth: af_bluetooth: Make BT_PKT_STATUS generic

2023-08-11T18:49:16+00:00

This makes the handling of BT_PKT_STATUS more generic so it can be reused by sockets other than SCO like BT_DEFER_SETUP, etc. Signed-off-by: Luiz Augusto von Dentz

Bluetooth: hci_sock: Forward credentials to monitor

2023-08-11T18:37:42+00:00

This stores scm_creds into hci_skb_cb so they can be properly forwarded to the likes of btmon which is then able to print information about the process who is originating the traffic: bluetoothd[35]: @ MGMT Command: Rea.. (0x0001) plen 0 {0x0001} @ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} Read Management Version Information (0x0001) plen 3 bluetoothd[35]: < ACL Data T.. flags 0x00 dlen 41 ATT: Write Command (0x52) len 36 Handle: 0x0043 Type: ASE Control Point (0x2bc6) Data: 020203000110270000022800020a00409c0001000110270000022800020a00409c00 Opcode: QoS Configuration (0x02) Number of ASE(s): 2 ASE: #0 ASE ID: 0x03 CIG ID: 0x00 CIS ID: 0x01 SDU Interval: 10000 usec Framing: Unframed (0x00) PHY: 0x02 LE 2M PHY (0x02) Max SDU: 40 RTN: 2 Max Transport Latency: 10 Presentation Delay: 40000 us ASE: #1 ASE ID: 0x01 CIG ID: 0x00 CIS ID: 0x01 SDU Interval: 10000 usec Framing: Unframed (0x00) PHY: 0x02 LE 2M PHY (0x02) Max SDU: 40 RTN: 2 Max Transport Latency: 10 Presentation Delay: 40000 us Signed-off-by: Luiz Augusto von Dentz

Bluetooth: Consolidate code around sk_alloc into a helper function

2023-08-11T18:36:50+00:00

This consolidates code around sk_alloc into bt_sock_alloc which does take care of common initialization. Signed-off-by: Luiz Augusto von Dentz

Bluetooth: ISO: Rework sync_interval to be sync_factor

2023-06-29T17:52:18+00:00

This rework sync_interval to be sync_factor as having sync_interval in the order of seconds is sometimes not disarable. Wit sync_factor the application can tell how many SDU intervals it wants to send an announcement with PA, the EA interval is set to 2 times that so a factor of 24 of BIG SDU interval of 10ms would look like the following: < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x01 Properties: 0x0000 Min advertising interval: 480.000 msec (0x0300) Max advertising interval: 480.000 msec (0x0300) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: Host has no preference (0x7f) Primary PHY: LE 1M (0x01) Secondary max skip: 0x00 Secondary PHY: LE 2M (0x02) SID: 0x00 Scan request notifications: Disabled (0x00) < HCI Command: LE Set Periodic Advertising Parameters (0x08|0x003e) plen 7 Handle: 1 Min interval: 240.00 msec (0x00c0) Max interval: 240.00 msec (0x00c0) Properties: 0x0000 Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Jakub Kicinski

Bluetooth: Split bt_iso_qos into dedicated structures

2023-04-24T04:59:17+00:00

Split bt_iso_qos into dedicated unicast and broadcast structures and add additional broadcast parameters. Fixes: eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS connections") Signed-off-by: Iulia Tanasescu Signed-off-by: Luiz Augusto von Dentz

Bluetooth: Implement support for Mesh

2022-09-06T20:18:24+00:00

The patch adds state bits, storage and HCI command chains for sending and receiving Bluetooth Mesh advertising packets, and delivery to requesting user space processes. It specifically creates 4 new MGMT commands and 2 new MGMT events: MGMT_OP_SET_MESH_RECEIVER - Sets passive scan parameters and a list of AD Types which will trigger Mesh Packet Received events MGMT_OP_MESH_READ_FEATURES - Returns information on how many outbound Mesh packets can be simultaneously queued, and what the currently queued handles are. MGMT_OP_MESH_SEND - Command to queue a specific outbound Mesh packet, with the number of times it should be sent, and the BD Addr to use. Discrete advertisments are added to the ADV Instance list. MGMT_OP_MESH_SEND_CANCEL - Command to cancel a prior outbound message request. MGMT_EV_MESH_DEVICE_FOUND - Event to deliver entire received Mesh Advertisement packet, along with timing information. MGMT_EV_MESH_PACKET_CMPLT - Event to indicate that an outbound packet is no longer queued for delivery. Signed-off-by: Brian Gix Signed-off-by: Luiz Augusto von Dentz

Bluetooth: ISO: Add broadcast support

2022-07-23T00:14:13+00:00

This adds broadcast support for BTPROTO_ISO by extending the sockaddr_iso with a new struct sockaddr_iso_bc where the socket user can set the broadcast address when receiving, the SID and the BIS indexes it wants to synchronize. When using BTPROTO_ISO for broadcast the roles are: Broadcaster -> uses connect with address set to BDADDR_ANY: > tools/isotest -s 00:00:00:00:00:00 Broadcast Receiver -> uses listen with address set to broadcaster: > tools/isotest -d 00:AA:01:00:00:00 Signed-off-by: Luiz Augusto von Dentz

Bluetooth: Add initial implementation of BIS connections

2022-07-23T00:13:56+00:00

This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz

Bluetooth: Add BTPROTO_ISO socket type

2022-07-23T00:13:39+00:00

This introduces a new socket type BTPROTO_ISO which can be enabled with use of ISO Socket experiemental UUID, it can used to initiate/accept connections and transfer packets between userspace and kernel similarly to how BTPROTO_SCO works: Central -> uses connect with address set to destination bdaddr: > tools/isotest -s 00:AA:01:00:00:00 Peripheral -> uses listen: > tools/isotest -d Signed-off-by: Luiz Augusto von Dentz

Bluetooth: Add initial implementation of CIS connections

2022-07-23T00:13:22+00:00

This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s

< HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz