kernel/linux.git/include/linux, branch v6.1.90

ethernet: Add helper for assigning packet type when dest address does not match device address

2024-05-02T14:29:29+00:00

commit 6e159fd653d7ebf6290358e0330a0cb8a75cf73b upstream. Enable reuse of logic in eth_type_trans for determining packet type. Suggested-by: Sabrina Dubroca Cc: stable@vger.kernel.org Signed-off-by: Rahul Rameshbabu Reviewed-by: Sabrina Dubroca Link: https://lore.kernel.org/r/20240423181319.115860-3-rrameshbabu@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

PCI/ASPM: Fix deadlock when enabling ASPM

2024-04-27T15:07:18+00:00

commit 1e560864159d002b453da42bd2c13a1805515a20 upstream. A last minute revert in 6.7-final introduced a potential deadlock when enabling ASPM during probe of Qualcomm PCIe controllers as reported by lockdep: ============================================ WARNING: possible recursive locking detected 6.7.0 #40 Not tainted -------------------------------------------- kworker/u16:5/90 is trying to acquire lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pcie_aspm_pm_state_change+0x58/0xdc but task is already holding lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(pci_bus_sem); lock(pci_bus_sem); *** DEADLOCK *** Call trace: print_deadlock_bug+0x25c/0x348 __lock_acquire+0x10a4/0x2064 lock_acquire+0x1e8/0x318 down_read+0x60/0x184 pcie_aspm_pm_state_change+0x58/0xdc pci_set_full_power_state+0xa8/0x114 pci_set_power_state+0xc4/0x120 qcom_pcie_enable_aspm+0x1c/0x3c [pcie_qcom] pci_walk_bus+0x64/0xbc qcom_pcie_host_post_init_2_7_0+0x28/0x34 [pcie_qcom] The deadlock can easily be reproduced on machines like the Lenovo ThinkPad X13s by adding a delay to increase the race window during asynchronous probe where another thread can take a write lock. Add a new pci_set_power_state_locked() and associated helper functions that can be called with the PCI bus semaphore held to avoid taking the read lock twice. Link: https://lore.kernel.org/r/ZZu0qx2cmn7IwTyQ@hovoldconsulting.com Link: https://lore.kernel.org/r/20240130100243.11011-1-johan+linaro@kernel.org Fixes: f93e71aea6c6 ("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"") Signed-off-by: Johan Hovold Signed-off-by: Bjorn Helgaas Cc: # 6.7 [bhelgaas: backported to v6.1.y, which contains b9c370b61d73 ("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()""), a backport of f93e71aea6c6. This omits the drivers/pci/controller/dwc/pcie-qcom.c hunk that updates qcom_pcie_enable_aspm(), which was added by 9f4f3dfad8cf ("PCI: qcom: Enable ASPM for platforms supporting 1.9.0 ops"), which is not present in v6.1.87.] Signed-off-by: Bjorn Helgaas Signed-off-by: Greg Kroah-Hartman

bootconfig: use memblock_free_late to free xbc memory to buddy

2024-04-27T15:07:17+00:00

commit 89f9a1e876b5a7ad884918c03a46831af202c8a0 upstream. On the time to free xbc memory in xbc_exit(), memblock may has handed over memory to buddy allocator. So it doesn't make sense to free memory back to memblock. memblock_free() called by xbc_exit() even causes UAF bugs on architectures with CONFIG_ARCH_KEEP_MEMBLOCK disabled like x86. Following KASAN logs shows this case. This patch fixes the xbc memory free problem by calling memblock_free() in early xbc init error rewind path and calling memblock_free_late() in xbc exit path to free memory to buddy allocator. [ 9.410890] ================================================================== [ 9.418962] BUG: KASAN: use-after-free in memblock_isolate_range+0x12d/0x260 [ 9.426850] Read of size 8 at addr ffff88845dd30000 by task swapper/0/1 [ 9.435901] CPU: 9 PID: 1 Comm: swapper/0 Tainted: G U 6.9.0-rc3-00208-g586b5dfb51b9 #5 [ 9.446403] Hardware name: Intel Corporation RPLP LP5 (CPU:RaptorLake)/RPLP LP5 (ID:13), BIOS IRPPN02.01.01.00.00.19.015.D-00000000 Dec 28 2023 [ 9.460789] Call Trace: [ 9.463518] [ 9.465859] dump_stack_lvl+0x53/0x70 [ 9.469949] print_report+0xce/0x610 [ 9.473944] ? __virt_addr_valid+0xf5/0x1b0 [ 9.478619] ? memblock_isolate_range+0x12d/0x260 [ 9.483877] kasan_report+0xc6/0x100 [ 9.487870] ? memblock_isolate_range+0x12d/0x260 [ 9.493125] memblock_isolate_range+0x12d/0x260 [ 9.498187] memblock_phys_free+0xb4/0x160 [ 9.502762] ? __pfx_memblock_phys_free+0x10/0x10 [ 9.508021] ? mutex_unlock+0x7e/0xd0 [ 9.512111] ? __pfx_mutex_unlock+0x10/0x10 [ 9.516786] ? kernel_init_freeable+0x2d4/0x430 [ 9.521850] ? __pfx_kernel_init+0x10/0x10 [ 9.526426] xbc_exit+0x17/0x70 [ 9.529935] kernel_init+0x38/0x1e0 [ 9.533829] ? _raw_spin_unlock_irq+0xd/0x30 [ 9.538601] ret_from_fork+0x2c/0x50 [ 9.542596] ? __pfx_kernel_init+0x10/0x10 [ 9.547170] ret_from_fork_asm+0x1a/0x30 [ 9.551552] [ 9.555649] The buggy address belongs to the physical page: [ 9.561875] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x1 pfn:0x45dd30 [ 9.570821] flags: 0x200000000000000(node=0|zone=2) [ 9.576271] page_type: 0xffffffff() [ 9.580167] raw: 0200000000000000 ffffea0011774c48 ffffea0012ba1848 0000000000000000 [ 9.588823] raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000 [ 9.597476] page dumped because: kasan: bad access detected [ 9.605362] Memory state around the buggy address: [ 9.610714] ffff88845dd2ff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 9.618786] ffff88845dd2ff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 9.626857] >ffff88845dd30000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.634930] ^ [ 9.638534] ffff88845dd30080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.646605] ffff88845dd30100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.654675] ================================================================== Link: https://lore.kernel.org/all/20240414114944.1012359-1-qiang4.zhang@linux.intel.com/ Fixes: 40caa127f3c7 ("init: bootconfig: Remove all bootconfig data when the init memory is removed") Cc: Stable@vger.kernel.org Signed-off-by: Qiang Zhang Acked-by: Masami Hiramatsu (Google) Signed-off-by: Masami Hiramatsu (Google) Signed-off-by: Greg Kroah-Hartman

usb: new quirk to reduce the SET_ADDRESS request timeout

2024-04-27T15:07:12+00:00

[ Upstream commit 5a1ccf0c72cf917ff3ccc131d1bb8d19338ffe52 ] This patch introduces a new USB quirk, USB_QUIRK_SHORT_SET_ADDRESS_REQ_TIMEOUT, which modifies the timeout value for the SET_ADDRESS request. The standard timeout for USB request/command is 5000 ms, as recommended in the USB 3.2 specification (section 9.2.6.1). However, certain scenarios, such as connecting devices through an APTIV hub, can lead to timeout errors when the device enumerates as full speed initially and later switches to high speed during chirp negotiation. In such cases, USB analyzer logs reveal that the bus suspends for 5 seconds due to incorrect chirp parsing and resumes only after two consecutive timeout errors trigger a hub driver reset. Packet(54) Dir(?) Full Speed J(997.100 us) Idle( 2.850 us) _______| Time Stamp(28 . 105 910 682) _______|_____________________________________________________________Ch0 Packet(55) Dir(?) Full Speed J(997.118 us) Idle( 2.850 us) _______| Time Stamp(28 . 106 910 632) _______|_____________________________________________________________Ch0 Packet(56) Dir(?) Full Speed J(399.650 us) Idle(222.582 us) _______| Time Stamp(28 . 107 910 600) _______|_____________________________________________________________Ch0 Packet(57) Dir Chirp J( 23.955 ms) Idle(115.169 ms) _______| Time Stamp(28 . 108 532 832) _______|_____________________________________________________________Ch0 Packet(58) Dir(?) Full Speed J (Suspend)( 5.347 sec) Idle( 5.366 us) _______| Time Stamp(28 . 247 657 600) _______|_____________________________________________________________Ch0 This 5-second delay in device enumeration is undesirable, particularly in automotive applications where quick enumeration is crucial (ideally within 3 seconds). The newly introduced quirks provide the flexibility to align with a 3-second time limit, as required in specific contexts like automotive applications. By reducing the SET_ADDRESS request timeout to 500 ms, the system can respond more swiftly to errors, initiate rapid recovery, and ensure efficient device enumeration. This change is vital for scenarios where rapid smartphone enumeration and screen projection are essential. To use the quirk, please write "vendor_id:product_id:p" to /sys/bus/usb/drivers/hub/module/parameter/quirks For example, echo "0x2c48:0x0132:p" > /sys/bus/usb/drivers/hub/module/parameters/quirks" Signed-off-by: Hardik Gajjar Reviewed-by: Alan Stern Link: https://lore.kernel.org/r/20231027152029.104363-2-hgajjar@de.adit-jv.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: xhci: Add timeout argument in address_device USB HCD callback

2024-04-27T15:07:11+00:00

[ Upstream commit a769154c7cac037914ba375ae88aae55b2c853e0 ] - The HCD address_device callback now accepts a user-defined timeout value in milliseconds, providing better control over command execution times. - The default timeout value for the address_device command has been set to 5000 ms, aligning with the USB 3.2 specification. However, this timeout can be adjusted as needed. - The xhci_setup_device function has been updated to accept the timeout value, allowing it to specify the maximum wait time for the command operation to complete. - The hub driver has also been updated to accommodate the newly added timeout parameter during the SET_ADDRESS request. Signed-off-by: Hardik Gajjar Reviewed-by: Mathias Nyman Link: https://lore.kernel.org/r/20231027152029.104363-1-hgajjar@de.adit-jv.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 5a1ccf0c72cf ("usb: new quirk to reduce the SET_ADDRESS request timeout") Signed-off-by: Sasha Levin

PCI: switchtec: Add support for PCIe Gen5 devices

2024-04-27T15:07:10+00:00

[ Upstream commit 0fb53e64705ae0fabd9593102e0f0e6812968802 ] Advertise support of Gen5 devices in the driver's device ID table and add the same IDs for the switchtec quirks. Also update driver code to accommodate them. Link: https://lore.kernel.org/r/20230624000003.2315364-3-kelvin.cao@microchip.com Signed-off-by: Kelvin Cao Signed-off-by: Bjorn Helgaas Reviewed-by: Logan Gunthorpe Signed-off-by: Sasha Levin

PCI: Delay after FLR of Solidigm P44 Pro NVMe

2024-04-27T15:07:10+00:00

[ Upstream commit 0ac448e0d29d6ba978684b3fa2e3ac7294ec2475 ] Prevent KVM hang when a Solidgm P44 Pro NVMe is passed through to a guest via IOMMU and the guest is subsequently rebooted. A similar issue was identified and patched by 51ba09452d11 ("PCI: Delay after FLR of Intel DC P3700 NVMe") and the same fix can be applied for this case. (Intel spun off their NAND and SSD business as Solidigm and sold it to SK Hynix in late 2021.) Link: https://lore.kernel.org/r/20230507073519.9737-1-mike@oobak.org Signed-off-by: Mike Pastore Signed-off-by: Bjorn Helgaas Signed-off-by: Sasha Levin

irqflags: Explicitly ignore lockdep_hrtimer_exit() argument

2024-04-17T09:18:28+00:00

commit c1d11fc2c8320871b40730991071dd0a0b405bc8 upstream. When building with 'make W=1' but CONFIG_TRACE_IRQFLAGS=n, the unused argument to lockdep_hrtimer_exit() causes a warning: kernel/time/hrtimer.c:1655:14: error: variable 'expires_in_hardirq' set but not used [-Werror=unused-but-set-variable] This is intentional behavior, so add a cast to void to shut up the warning. Fixes: 73d20564e0dc ("hrtimer: Don't dereference the hrtimer pointer after the callback") Reported-by: kernel test robot Signed-off-by: Arnd Bergmann Signed-off-by: Thomas Gleixner Reviewed-by: Sebastian Andrzej Siewior Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240408074609.3170807-1-arnd@kernel.org Closes: https://lore.kernel.org/oe-kbuild-all/202311191229.55QXHVc6-lkp@intel.com/ Signed-off-by: Greg Kroah-Hartman

u64_stats: fix u64_stats_init() for lockdep when used repeatedly in one file

2024-04-17T09:18:23+00:00

[ Upstream commit 38a15d0a50e0a43778561a5861403851f0b0194c ] Fix bogus lockdep warnings if multiple u64_stats_sync variables are initialized in the same file. With CONFIG_LOCKDEP, seqcount_init() is a macro which declares: static struct lock_class_key __key; Since u64_stats_init() is a function (albeit an inline one), all calls within the same file end up using the same instance, effectively treating them all as a single lock-class. Fixes: 9464ca650008 ("net: make u64_stats_init() a function") Closes: https://lore.kernel.org/netdev/ea1567d9-ce66-45e6-8168-ac40a47d1821@roeck-us.net/ Signed-off-by: Petr Tesarik Reviewed-by: Simon Horman Reviewed-by: Eric Dumazet Link: https://lore.kernel.org/r/20240404075740.30682-1-petr@tesarici.cz Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

Revert "drm/qxl: simplify qxl_fence_wait"

2024-04-17T09:18:23+00:00

[ Upstream commit 07ed11afb68d94eadd4ffc082b97c2331307c5ea ] This reverts commit 5a838e5d5825c85556011478abde708251cc0776. Changes from commit 5a838e5d5825 ("drm/qxl: simplify qxl_fence_wait") would result in a '[TTM] Buffer eviction failed' exception whenever it reached a timeout. Due to a dependency to DMA_FENCE_WARN this also restores some code deleted by commit d72277b6c37d ("dma-buf: nuke DMA_FENCE_TRACE macros v2"). Fixes: 5a838e5d5825 ("drm/qxl: simplify qxl_fence_wait") Link: https://lore.kernel.org/regressions/ZTgydqRlK6WX_b29@eldamar.lan/ Reported-by: Timo Lindfors Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1054514 Signed-off-by: Alex Constantino Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20240404181448.1643-2-dreaming.about.electric.sheep@gmail.com Signed-off-by: Sasha Levin