kernel/linux.git/include/linux, branch v6.1.59

dma-buf: add dma_fence_timestamp helper

2023-10-19T21:08:57+00:00

commit b83ce9cb4a465b8f9a3fa45561b721a9551f60e3 upstream. When a fence signals there is a very small race window where the timestamp isn't updated yet. sync_file solves this by busy waiting for the timestamp to appear, but on other ocassions didn't handled this correctly. Provide a dma_fence_timestamp() helper function for this and use it in all appropriate cases. Another alternative would be to grab the spinlock when that happens. v2 by teddy: add a wait parameter to wait for the timestamp to show up, in case the accurate timestamp is needed and/or the timestamp is not based on ktime (e.g. hw timestamp) v3 chk: drop the parameter again for unified handling Signed-off-by: Yunxiang Li Signed-off-by: Christian König Fixes: 1774baa64f93 ("drm/scheduler: Change scheduled fence track v2") Reviewed-by: Alex Deucher CC: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20230929104725.2358-1-christian.koenig@amd.com Signed-off-by: Greg Kroah-Hartman

mcb: remove is_added flag from mcb_device struct

2023-10-19T21:08:56+00:00

commit 0f28ada1fbf0054557cddcdb93ad17f767105208 upstream. When calling mcb_bus_add_devices(), both mcb devices and the mcb bus will attempt to attach a device to a driver because they share the same bus_type. This causes an issue when trying to cast the container of the device to mcb_device struct using to_mcb_device(), leading to a wrong cast when the mcb_bus is added. A crash occurs when freing the ida resources as the bus numbering of mcb_bus gets confused with the is_added flag on the mcb_device struct. The only reason for this cast was to keep an is_added flag on the mcb_device struct that does not seem necessary. The function device_attach() handles already bound devices and the mcb subsystem does nothing special with this is_added flag so remove it completely. Fixes: 18d288198099 ("mcb: Correctly initialize the bus's device") Cc: stable Signed-off-by: Jorge Sanjuan Garcia Co-developed-by: Jose Javier Rodriguez Barbarin Signed-off-by: Jose Javier Rodriguez Barbarin Link: https://lore.kernel.org/r/20230906114901.63174-2-JoseJavier.Rodriguez@duagon.com Signed-off-by: Greg Kroah-Hartman

ata: libata-scsi: Disable scsi device manage_system_start_stop

2023-10-19T21:08:50+00:00

commit aa3998dbeb3abce63653b7f6d4542e7dcd022590 upstream. The introduction of a device link to create a consumer/supplier relationship between the scsi device of an ATA device and the ATA port of that ATA device fixes the ordering of system suspend and resume operations. For suspend, the scsi device is suspended first and the ata port after it. This is fine as this allows the synchronize cache and START STOP UNIT commands issued by the scsi disk driver to be executed before the ata port is disabled. For resume operations, the ata port is resumed first, followed by the scsi device. This allows having the request queue of the scsi device to be unfrozen after the ata port resume is scheduled in EH, thus avoiding to see new requests prematurely issued to the ATA device. Since libata sets manage_system_start_stop to 1, the scsi disk resume operation also results in issuing a START STOP UNIT command to the device being resumed so that the device exits standby power mode. However, restoring the ATA device to the active power mode must be synchronized with libata EH processing of the port resume operation to avoid either 1) seeing the start stop unit command being received too early when the port is not yet resumed and ready to accept commands, or after the port resume process issues commands such as IDENTIFY to revalidate the device. In this last case, the risk is that the device revalidation fails with timeout errors as the drive is still spun down. Commit 0a8589055936 ("ata,scsi: do not issue START STOP UNIT on resume") disabled issuing the START STOP UNIT command to avoid issues with it. But this is incorrect as transitioning a device to the active power mode from the standby power mode set on suspend requires a media access command. The IDENTIFY, READ LOG and SET FEATURES commands executed in libata EH context triggered by the ata port resume operation may thus fail. Fix these synchronization issues is by handling a device power mode transitions for system suspend and resume directly in libata EH context, without relying on the scsi disk driver management triggered with the manage_system_start_stop flag. To do this, the following libata helper functions are introduced: 1) ata_dev_power_set_standby(): This function issues a STANDBY IMMEDIATE command to transitiom a device to the standby power mode. For HDDs, this spins down the disks. This function applies only to ATA and ZAC devices and does nothing otherwise. This function also does nothing for devices that have the ATA_FLAG_NO_POWEROFF_SPINDOWN or ATA_FLAG_NO_HIBERNATE_SPINDOWN flag set. For suspend, call ata_dev_power_set_standby() in ata_eh_handle_port_suspend() before the port is disabled and frozen. ata_eh_unload() is also modified to transition all enabled devices to the standby power mode when the system is shutdown or devices removed. 2) ata_dev_power_set_active() and This function applies to ATA or ZAC devices and issues a VERIFY command for 1 sector at LBA 0 to transition the device to the active power mode. For HDDs, since this function will complete only once the disk spin up. Its execution uses the same timeouts as for reset, to give the drive enough time to complete spinup without triggering a command timeout. For resume, call ata_dev_power_set_active() in ata_eh_revalidate_and_attach() after the port has been enabled and before any other command is issued to the device. With these changes, the manage_system_start_stop and no_start_on_resume scsi device flags do not need to be set in ata_scsi_dev_config(). The flag manage_runtime_start_stop is still set to allow the sd driver to spinup/spindown a disk through the sd runtime operations. Fixes: 0a8589055936 ("ata,scsi: do not issue START STOP UNIT on resume") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Tested-by: Geert Uytterhoeven Reviewed-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

quota: Fix slow quotaoff

2023-10-19T21:08:50+00:00

commit 869b6ea1609f655a43251bf41757aa44e5350a8f upstream. Eric has reported that commit dabc8b207566 ("quota: fix dqput() to follow the guarantees dquot_srcu should provide") heavily increases runtime of generic/270 xfstest for ext4 in nojournal mode. The reason for this is that ext4 in nojournal mode leaves dquots dirty until the last dqput() and thus the cleanup done in quota_release_workfn() has to write them all. Due to the way quota_release_workfn() is written this results in synchronize_srcu() call for each dirty dquot which makes the dquot cleanup when turning quotas off extremely slow. To be able to avoid synchronize_srcu() for each dirty dquot we need to rework how we track dquots to be cleaned up. Instead of keeping the last dquot reference while it is on releasing_dquots list, we drop it right away and mark the dquot with new DQ_RELEASING_B bit instead. This way we can we can remove dquot from releasing_dquots list when new reference to it is acquired and thus there's no need to call synchronize_srcu() each time we drop dq_list_lock. References: https://lore.kernel.org/all/ZRytn6CxFK2oECUt@debian-BULLSEYE-live-builder-AMD64 Reported-by: Eric Whitney Fixes: dabc8b207566 ("quota: fix dqput() to follow the guarantees dquot_srcu should provide") CC: stable@vger.kernel.org Signed-off-by: Jan Kara Signed-off-by: Greg Kroah-Hartman

Revert "NFS: Use the correct commit info in nfs_join_page_group()"

2023-10-15T16:32:41+00:00

This reverts commit d4729af1c73cfacb64facda3d196e25940f0e7a5 which is commit b193a78ddb5ee7dba074d3f28dc050069ba083c0 upstream. There are reported NFS problems in the 6.1.56 release, so revert a set of NFS patches to hopefully resolve the issue. Reported-by: poester Link: https://lore.kernel.org/r/20231012165439.137237-2-kernel@linuxace.com Reported-by: Daniel Díaz Link: https://lore.kernel.org/r/2023100755-livestock-barcode-fe41@gregkh Cc: Trond Myklebust Cc: Anna Schumaker Cc: Sasha Levin Signed-off-by: Greg Kroah-Hartman

netfilter: handle the connecting collision properly in nf_conntrack_proto_sctp

2023-10-10T20:00:43+00:00

[ Upstream commit 8e56b063c86569e51eed1c5681ce6361fa97fc7a ] In Scenario A and B below, as the delayed INIT_ACK always changes the peer vtag, SCTP ct with the incorrect vtag may cause packet loss. Scenario A: INIT_ACK is delayed until the peer receives its own INIT_ACK 192.168.1.2 > 192.168.1.1: [INIT] [init tag: 1328086772] 192.168.1.1 > 192.168.1.2: [INIT] [init tag: 1414468151] 192.168.1.2 > 192.168.1.1: [INIT ACK] [init tag: 1328086772] 192.168.1.1 > 192.168.1.2: [INIT ACK] [init tag: 1650211246] * 192.168.1.2 > 192.168.1.1: [COOKIE ECHO] 192.168.1.1 > 192.168.1.2: [COOKIE ECHO] 192.168.1.2 > 192.168.1.1: [COOKIE ACK] Scenario B: INIT_ACK is delayed until the peer completes its own handshake 192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT] [init tag: 144230885] 192.168.1.2 > 192.168.1.1: sctp (1) [INIT ACK] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [COOKIE ECHO] 192.168.1.2 > 192.168.1.1: sctp (1) [COOKIE ACK] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT ACK] [init tag: 3914796021] * This patch fixes it as below: In SCTP_CID_INIT processing: - clear ct->proto.sctp.init[!dir] if ct->proto.sctp.init[dir] && ct->proto.sctp.init[!dir]. (Scenario E) - set ct->proto.sctp.init[dir]. In SCTP_CID_INIT_ACK processing: - drop it if !ct->proto.sctp.init[!dir] && ct->proto.sctp.vtag[!dir] && ct->proto.sctp.vtag[!dir] != ih->init_tag. (Scenario B, Scenario C) - drop it if ct->proto.sctp.init[dir] && ct->proto.sctp.init[!dir] && ct->proto.sctp.vtag[!dir] != ih->init_tag. (Scenario A) In SCTP_CID_COOKIE_ACK processing: - clear ct->proto.sctp.init[dir] and ct->proto.sctp.init[!dir]. (Scenario D) Also, it's important to allow the ct state to move forward with cookie_echo and cookie_ack from the opposite dir for the collision scenarios. There are also other Scenarios where it should allow the packet through, addressed by the processing above: Scenario C: new CT is created by INIT_ACK. Scenario D: start INIT on the existing ESTABLISHED ct. Scenario E: start INIT after the old collision on the existing ESTABLISHED ct. 192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT] [init tag: 144230885] (both side are stopped, then start new connection again in hours) 192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 242308742] Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.") Signed-off-by: Xin Long Signed-off-by: Florian Westphal Signed-off-by: Sasha Levin

regulator: mt6358: Drop *_SSHUB regulators

2023-10-10T20:00:40+00:00

[ Upstream commit 04ba665248ed91576d326041108e5fc2ec2254eb ] The *_SSHUB regulators are actually alternate configuration interfaces for their non *_SSHUB counterparts. They are not separate regulator outputs. These registers are intended for the companion processor to use to configure the power rails while the main processor is sleeping. They are not intended for the main operating system to use. Since they are not real outputs they shouldn't be modeled separately. Remove them. Luckily no device tree actually uses them. Signed-off-by: Chen-Yu Tsai Reviewed-by: AngeloGioacchino Del Regno Reviewed-by: Matthias Brugger Link: https://lore.kernel.org/r/20230609083009.2822259-5-wenst@chromium.org Signed-off-by: Mark Brown Stable-dep-of: 7e37c851374e ("regulator: mt6358: split ops for buck and linear range LDO regulators") Signed-off-by: Sasha Levin

bpf: Fix tr dereferencing

2023-10-10T20:00:40+00:00

[ Upstream commit b724a6418f1f853bcb39c8923bf14a50c7bdbd07 ] Fix 'tr' dereferencing bug when CONFIG_BPF_JIT is turned off. When CONFIG_BPF_JIT is turned off, 'bpf_trampoline_get()' returns NULL, which is same as the cases when CONFIG_BPF_JIT is turned on. Closes: https://lore.kernel.org/r/202309131936.5Nc8eUD0-lkp@intel.com/ Fixes: f7b12b6fea00 ("bpf: verifier: refactor check_attach_btf_id()") Reported-by: kernel test robot Reported-by: Dan Carpenter Signed-off-by: Leon Hwang Signed-off-by: Andrii Nakryiko Link: https://lore.kernel.org/bpf/20230917153846.88732-1-hffilwlqm@gmail.com Signed-off-by: Sasha Levin

net: change accept_ra_min_rtr_lft to affect all RA lifetimes

2023-10-10T20:00:37+00:00

commit 5027d54a9c30bc7ec808360378e2b4753f053f25 upstream. accept_ra_min_rtr_lft only considered the lifetime of the default route and discarded entire RAs accordingly. This change renames accept_ra_min_rtr_lft to accept_ra_min_lft, and applies the value to individual RA sections; in particular, router lifetime, PIO preferred lifetime, and RIO lifetime. If any of those lifetimes are lower than the configured value, the specific RA section is ignored. In order for the sysctl to be useful to Android, it should really apply to all lifetimes in the RA, since that is what determines the minimum frequency at which RAs must be processed by the kernel. Android uses hardware offloads to drop RAs for a fraction of the minimum of all lifetimes present in the RA (some networks have very frequent RAs (5s) with high lifetimes (2h)). Despite this, we have encountered networks that set the router lifetime to 30s which results in very frequent CPU wakeups. Instead of disabling IPv6 (and dropping IPv6 ethertype in the WiFi firmware) entirely on such networks, it seems better to ignore the misconfigured routers while still processing RAs from other IPv6 routers on the same network (i.e. to support IoT applications). The previous implementation dropped the entire RA based on router lifetime. This turned out to be hard to expand to the other lifetimes present in the RA in a consistent manner; dropping the entire RA based on RIO/PIO lifetimes would essentially require parsing the whole thing twice. Fixes: 1671bcfd76fd ("net: add sysctl accept_ra_min_rtr_lft") Cc: Lorenzo Colitti Signed-off-by: Patrick Rohr Reviewed-by: Maciej Żenczykowski Reviewed-by: David Ahern Link: https://lore.kernel.org/r/20230726230701.919212-1-prohr@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: add sysctl accept_ra_min_rtr_lft

2023-10-10T20:00:36+00:00

commit 1671bcfd76fdc0b9e65153cf759153083755fe4c upstream. This change adds a new sysctl accept_ra_min_rtr_lft to specify the minimum acceptable router lifetime in an RA. If the received RA router lifetime is less than the configured value (and not 0), the RA is ignored. This is useful for mobile devices, whose battery life can be impacted by networks that configure RAs with a short lifetime. On such networks, the device should never gain IPv6 provisioning and should attempt to drop RAs via hardware offload, if available. Signed-off-by: Patrick Rohr Cc: Maciej Żenczykowski Cc: Lorenzo Colitti Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman