kernel/linux.git/include/linux, branch v6.1.18

PCI: Add ACS quirk for Wangxun NICs

2023-03-11T12:55:39+00:00

[ Upstream commit a2b9b123ccac913e9f9b80337d687a2fe786a634 ] Wangxun has verified there is no peer-to-peer between functions for the below selection of SFxxx, RP1000 and RP2000 NICS. They may be multi-function devices, but the hardware does not advertise ACS capability. Add an ACS quirk for these devices so the functions can be in independent IOMMU groups. Link: https://lore.kernel.org/r/20230207102419.44326-1-mengyuanlou@net-swift.com Signed-off-by: Mengyuan Lou Signed-off-by: Bjorn Helgaas Signed-off-by: Sasha Levin

PCI: loongson: Prevent LS7A MRRS increases

2023-03-11T12:55:35+00:00

[ Upstream commit 8b3517f88ff2983f52698893519227c10aac90b2 ] Except for isochronous-configured devices, software may set Max_Read_Request_Size (MRRS) to any value up to 4096. If a device issues a read request with size greater than the completer's Max_Payload_Size (MPS), the completer is required to break the response into multiple completions. Instead of correctly responding with multiple completions to a large read request, some LS7A Root Ports respond with a Completer Abort. To prevent this, the MRRS must be limited to an implementation-specific value. The OS cannot detect that value, so rely on BIOS to configure MRRS before booting, and quirk the Root Ports so we never set an MRRS larger than that BIOS value for any downstream device. N.B. Hot-added devices are not configured by BIOS, and they power up with MRRS = 512 bytes, so these devices will be limited to 512 bytes. If the LS7A limit is smaller, those hot-added devices may not work correctly, but per [1], hotplug is not supported with this chipset revision. [1] https://lore.kernel.org/r/073638a7-ae68-2847-ac3d-29e5e760d6af@loongson.cn [bhelgaas: commit log] Link: https://bugzilla.kernel.org/show_bug.cgi?id=216884 Link: https://lore.kernel.org/r/20230201043018.778499-3-chenhuacai@loongson.cn Signed-off-by: Huacai Chen Signed-off-by: Bjorn Helgaas Signed-off-by: Sasha Levin

bootconfig: Increase max nodes of bootconfig from 1024 to 8192 for DCC support

2023-03-11T12:55:32+00:00

[ Upstream commit 6c40624930c58529185a257380442547580ed837 ] The Data Capture and Compare(DCC) is a debugging tool that uses the bootconfig for configuring the register values during boot-time. Increase the max nodes supported by bootconfig to cater to the requirements of the Data Capture and Compare Driver. Link: https://lore.kernel.org/all/1674536682-18404-1-git-send-email-quic_schowdhu@quicinc.com/ Signed-off-by: Souradeep Chowdhury Acked-by: Masami Hiramatsu (Google) Signed-off-by: Masami Hiramatsu (Google) Signed-off-by: Sasha Levin

net: dsa: seville: ignore mscc-miim read errors from Lynx PCS

2023-03-11T12:55:28+00:00

[ Upstream commit 0322ef49c1ac6f0e2ef37b146c0bf8440873072c ] During the refactoring in the commit below, vsc9953_mdio_read() was replaced with mscc_miim_read(), which has one extra step: it checks for the MSCC_MIIM_DATA_ERROR bits before returning the result. On T1040RDB, there are 8 QSGMII PCSes belonging to the switch, and they are organized in 2 groups. First group responds to MDIO addresses 4-7 because QSGMIIACR1[MDEV_PORT] is 1, and the second group responds to MDIO addresses 8-11 because QSGMIIBCR1[MDEV_PORT] is 2. I have double checked that these values are correctly set in the SERDES, as well as PCCR1[QSGMA_CFG] and PCCR1[QSGMB_CFG] are both 0b01. mscc_miim_read: phyad 8 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 8 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 8 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 8 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 9 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 9 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 9 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 9 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 10 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 10 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 10 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 10 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 11 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 11 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 11 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 11 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 4 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 4 reg 0x5 MIIM_DATA 0x3da01, ERROR mscc_miim_read: phyad 5 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 5 reg 0x5 MIIM_DATA 0x35801, ERROR mscc_miim_read: phyad 5 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 5 reg 0x5 MIIM_DATA 0x35801, ERROR mscc_miim_read: phyad 6 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 6 reg 0x5 MIIM_DATA 0x35801, ERROR mscc_miim_read: phyad 6 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 6 reg 0x5 MIIM_DATA 0x35801, ERROR mscc_miim_read: phyad 7 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 7 reg 0x5 MIIM_DATA 0x35801, ERROR mscc_miim_read: phyad 7 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 7 reg 0x5 MIIM_DATA 0x35801, ERROR As can be seen, the data in MIIM_DATA is still valid despite having the MSCC_MIIM_DATA_ERROR bits set. The driver as introduced in commit 84705fc16552 ("net: dsa: felix: introduce support for Seville VSC9953 switch") was ignoring these bits, perhaps deliberately (although unbeknownst to me). This is an old IP and the hardware team cannot seem to be able to help me track down a plausible reason for these failures. I'll keep investigating, but in the meantime, this is a direct regression which must be restored to a working state. The only thing I can do is keep ignoring the errors as before. Fixes: b99658452355 ("net: dsa: ocelot: felix: utilize shared mscc-miim driver for indirect MDIO access") Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

netfilter: ctnetlink: make event listener tracking global

2023-03-11T12:55:24+00:00

[ Upstream commit fdf6491193e411087ae77bcbc6468e3e1cff99ed ] pernet tracking doesn't work correctly because other netns might have set NETLINK_LISTEN_ALL_NSID on its event socket. In this case its expected that events originating in other net namespaces are also received. Making pernet-tracking work while also honoring NETLINK_LISTEN_ALL_NSID requires much more intrusive changes both in netlink and nfnetlink, f.e. adding a 'setsockopt' callback that lets nfnetlink know that the event socket entered (or left) ALL_NSID mode. Move to global tracking instead: if there is an event socket anywhere on the system, all net namespaces which have conntrack enabled and use autobind mode will allocate the ecache extension. netlink_has_listeners() returns false only if the given group has no subscribers in any net namespace, the 'net' argument passed to nfnetlink_has_listeners is only used to derive the protocol (nfnetlink), it has no other effect. For proper NETLINK_LISTEN_ALL_NSID-aware pernet tracking of event listeners a new netlink_has_net_listeners() is also needed. Fixes: 90d1daa45849 ("netfilter: conntrack: add nf_conntrack_events autodetect mode") Reported-by: Bryce Kahle Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin

Revert "blk-cgroup: synchronize pd_free_fn() from blkg_free_workfn() and blkcg_deactivate_policy()"

2023-03-11T10:03:45+00:00

This reverts commit 81c1188905f88b77743d1fdeeedfc8cb7b67787d which is commit f1c006f1c6850c14040f8337753a63119bba39b9 upstream. It is reported to cause problems, as only 2 of the 3 patch series were applied to the stable branches. Reported-by: Mike Cloaked Reported-by: Eric Biggers Cc: Yu Kuai Cc: Tejun Heo Cc: Christoph Hellwig Cc: Jens Axboe Cc: Sasha Levin Link: https://bugzilla.kernel.org/show_bug.cgi?id=217174 Link: https://lore.kernel.org/r/ZAuPkCn49urWBN5P@sol.localdomain Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman

wait: Return number of exclusive waiters awaken

2023-03-10T08:34:34+00:00

commit ee7dc86b6d3e3b86c2c487f713eda657850de238 upstream. Sbitmap code will need to know how many waiters were actually woken for its batched wakeups implementation. Return the number of woken exclusive waiters from __wake_up() to facilitate that. Suggested-by: Jan Kara Signed-off-by: Gabriel Krisman Bertazi Reviewed-by: Jan Kara Link: https://lore.kernel.org/r/20221115224553.23594-3-krisman@suse.de Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

mm/hwpoison: convert TTU_IGNORE_HWPOISON to TTU_HWPOISON

2023-03-10T08:34:25+00:00

commit 6da6b1d4a7df8c35770186b53ef65d388398e139 upstream. After a memory error happens on a clean folio, a process unexpectedly receives SIGBUS when it accesses the error page. This SIGBUS killing is pointless and simply degrades the level of RAS of the system, because the clean folio can be dropped without any data lost on memory error handling as we do for a clean pagecache. When memory_failure() is called on a clean folio, try_to_unmap() is called twice (one from split_huge_page() and one from hwpoison_user_mappings()). The root cause of the issue is that pte conversion to hwpoisoned entry is now done in the first call of try_to_unmap() because PageHWPoison is already set at this point, while it's actually expected to be done in the second call. This behavior disturbs the error handling operation like removing pagecache, which results in the malfunction described above. So convert TTU_IGNORE_HWPOISON into TTU_HWPOISON and set TTU_HWPOISON only when we really intend to convert pte to hwpoison entry. This can prevent other callers of try_to_unmap() from accidentally converting to hwpoison entries. Link: https://lkml.kernel.org/r/20230221085905.1465385-1-naoya.horiguchi@linux.dev Fixes: a42634a6c07d ("readahead: Use a folio in read_pages()") Signed-off-by: Naoya Horiguchi Cc: David Hildenbrand Cc: Hugh Dickins Cc: Matthew Wilcox Cc: Miaohe Lin Cc: Minchan Kim Cc: Vlastimil Babka Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman

cxl/pmem: Fix nvdimm registration races

2023-03-10T08:34:20+00:00

commit f57aec443c24d2e8e1f3b5b4856aea12ddda4254 upstream. A loop of the form: while true; do modprobe cxl_pci; modprobe -r cxl_pci; done ...fails with the following crash signature: BUG: kernel NULL pointer dereference, address: 0000000000000040 [..] RIP: 0010:cxl_internal_send_cmd+0x5/0xb0 [cxl_core] [..] Call Trace: cxl_pmem_ctl+0x121/0x240 [cxl_pmem] nvdimm_get_config_data+0xd6/0x1a0 [libnvdimm] nd_label_data_init+0x135/0x7e0 [libnvdimm] nvdimm_probe+0xd6/0x1c0 [libnvdimm] nvdimm_bus_probe+0x7a/0x1e0 [libnvdimm] really_probe+0xde/0x380 __driver_probe_device+0x78/0x170 driver_probe_device+0x1f/0x90 __device_attach_driver+0x85/0x110 bus_for_each_drv+0x7d/0xc0 __device_attach+0xb4/0x1e0 bus_probe_device+0x9f/0xc0 device_add+0x445/0x9c0 nd_async_device_register+0xe/0x40 [libnvdimm] async_run_entry_fn+0x30/0x130 ...namely that the bottom half of async nvdimm device registration runs after the CXL has already torn down the context that cxl_pmem_ctl() needs. Unlike the ACPI NFIT case that benefits from launching multiple nvdimm device registrations in parallel from those listed in the table, CXL is already marked PROBE_PREFER_ASYNCHRONOUS. So provide for a synchronous registration path to preclude this scenario. Fixes: 21083f51521f ("cxl/pmem: Register 'pmem' / cxl_nvdimm devices") Cc: Reported-by: Dave Jiang Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman

ima: Align ima_file_mmap() parameters with mmap_file LSM hook

2023-03-10T08:34:15+00:00

commit 4971c268b85e1c7a734a61622fc0813c86e2362e upstream. Commit 98de59bfe4b2f ("take calculation of final prot in security_mmap_file() into a helper") moved the code to update prot, to be the actual protections applied to the kernel, to a new helper called mmap_prot(). However, while without the helper ima_file_mmap() was getting the updated prot, with the helper ima_file_mmap() gets the original prot, which contains the protections requested by the application. A possible consequence of this change is that, if an application calls mmap() with only PROT_READ, and the kernel applies PROT_EXEC in addition, that application would have access to executable memory without having this event recorded in the IMA measurement list. This situation would occur for example if the application, before mmap(), calls the personality() system call with READ_IMPLIES_EXEC as the first argument. Align ima_file_mmap() parameters with those of the mmap_file LSM hook, so that IMA can receive both the requested prot and the final prot. Since the requested protections are stored in a new variable, and the final protections are stored in the existing variable, this effectively restores the original behavior of the MMAP_CHECK hook. Cc: stable@vger.kernel.org Fixes: 98de59bfe4b2 ("take calculation of final prot in security_mmap_file() into a helper") Signed-off-by: Roberto Sassu Reviewed-by: Stefan Berger Signed-off-by: Mimi Zohar Signed-off-by: Greg Kroah-Hartman