kernel/linux.git/include/linux, branch v5.9.12

arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where needed

2020-12-02T07:51:54+00:00

[ Upstream commit cef397038167ac15d085914493d6c86385773709 ] Stefan Agner reported a bug when using zsram on 32-bit Arm machines with RAM above the 4GB address boundary: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = a27bd01c [00000000] *pgd=236a0003, *pmd=1ffa64003 Internal error: Oops: 207 [#1] SMP ARM Modules linked in: mdio_bcm_unimac(+) brcmfmac cfg80211 brcmutil raspberrypi_hwmon hci_uart crc32_arm_ce bcm2711_thermal phy_generic genet CPU: 0 PID: 123 Comm: mkfs.ext4 Not tainted 5.9.6 #1 Hardware name: BCM2711 PC is at zs_map_object+0x94/0x338 LR is at zram_bvec_rw.constprop.0+0x330/0xa64 pc : [] lr : [] psr: 60000013 sp : e376bbe0 ip : 00000000 fp : c1e2921c r10: 00000002 r9 : c1dda730 r8 : 00000000 r7 : e8ff7a00 r6 : 00000000 r5 : 02f9ffa0 r4 : e3710000 r3 : 000fdffe r2 : c1e0ce80 r1 : ebf979a0 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 30c5383d Table: 235c2a80 DAC: fffffffd Process mkfs.ext4 (pid: 123, stack limit = 0x495a22e6) Stack: (0xe376bbe0 to 0xe376c000) As it turns out, zsram needs to know the maximum memory size, which is defined in MAX_PHYSMEM_BITS when CONFIG_SPARSEMEM is set, or in MAX_POSSIBLE_PHYSMEM_BITS on the x86 architecture. The same problem will be hit on all 32-bit architectures that have a physical address space larger than 4GB and happen to not enable sparsemem and include asm/sparsemem.h from asm/pgtable.h. After the initial discussion, I suggested just always defining MAX_POSSIBLE_PHYSMEM_BITS whenever CONFIG_PHYS_ADDR_T_64BIT is set, or provoking a build error otherwise. This addresses all configurations that can currently have this runtime bug, but leaves all other configurations unchanged. I looked up the possible number of bits in source code and datasheets, here is what I found: - on ARC, CONFIG_ARC_HAS_PAE40 controls whether 32 or 40 bits are used - on ARM, CONFIG_LPAE enables 40 bit addressing, without it we never support more than 32 bits, even though supersections in theory allow up to 40 bits as well. - on MIPS, some MIPS32r1 or later chips support 36 bits, and MIPS32r5 XPA supports up to 60 bits in theory, but 40 bits are more than anyone will ever ship - On PowerPC, there are three different implementations of 36 bit addressing, but 32-bit is used without CONFIG_PTE_64BIT - On RISC-V, the normal page table format can support 34 bit addressing. There is no highmem support on RISC-V, so anything above 2GB is unused, but it might be useful to eventually support CONFIG_ZRAM for high pages. Fixes: 61989a80fb3a ("staging: zsmalloc: zsmalloc memory allocation library") Fixes: 02390b87a945 ("mm/zsmalloc: Prepare to variable MAX_PHYSMEM_BITS") Acked-by: Thomas Bogendoerfer Reviewed-by: Stefan Agner Tested-by: Stefan Agner Acked-by: Mike Rapoport Link: https://lore.kernel.org/linux-mm/bdfa44bf1c570b05d6c70898e2bbb0acf234ecdf.1604762181.git.stefan@agner.ch/ Signed-off-by: Arnd Bergmann Signed-off-by: Sasha Levin

bus: ti-sysc: Fix reset status check for modules with quirks

2020-12-02T07:51:52+00:00

[ Upstream commit e275d2109cdaea8b4554b9eb8a828bdb8f8ba068 ] Commit d46f9fbec719 ("bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit") started showing a "OCP softreset timed out" warning on enable if the interconnect target module is not out of reset. This caused the warning to be often triggered for i2c and hdq while the devices are working properly. Turns out that some interconnect target modules seem to have an unusable reset status bits unless the module specific reset quirks are activated. Let's just skip the reset status check for those modules as we only want to activate the reset quirks when doing a reset, and not on enable. This way we don't see the bogus "OCP softreset timed out" warnings during boot. Fixes: d46f9fbec719 ("bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit") Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin

firmware: xilinx: Use hash-table for api feature check

2020-12-02T07:51:46+00:00

commit acfdd18591eaac25446e976a0c0d190f8b3dbfb1 upstream. Currently array of fix length PM_API_MAX is used to cache the pm_api version (valid or invalid). However ATF based PM APIs values are much higher then PM_API_MAX. So to include ATF based PM APIs also, use hash-table to store the pm_api version status. Signed-off-by: Amit Sunil Dhamne Reported-by: Arnd Bergmann Signed-off-by: Ravi Patel Signed-off-by: Rajan Vaja Reviewed-by: Arnd Bergmann Tested-by: Michal Simek Fixes: f3217d6f2f7a ("firmware: xilinx: fix out-of-bounds access") Cc: stable Link: https://lore.kernel.org/r/1606197161-25976-1-git-send-email-rajan.vaja@xilinx.com Signed-off-by: Michal Simek Signed-off-by: Greg Kroah-Hartman

mm: fix readahead_page_batch for retry entries

2020-11-24T12:39:15+00:00

commit 4349a83a3190c1d4414371161b0f4a4c3ccd3f9d upstream. Both btrfs and fuse have reported faults caused by seeing a retry entry instead of the page they were looking for. This was caused by a missing check in the iterator. As can be seen in the below panic log, the accessing 0x402 causes a panic. In the xarray.h, 0x402 means RETRY_ENTRY. BUG: kernel NULL pointer dereference, address: 0000000000000402 CPU: 14 PID: 306003 Comm: as Not tainted 5.9.0-1-amd64 #1 Debian 5.9.1-1 Hardware name: Lenovo ThinkSystem SR665/7D2VCTO1WW, BIOS D8E106Q-1.01 05/30/2020 RIP: 0010:fuse_readahead+0x152/0x470 [fuse] Code: 41 8b 57 18 4c 8d 54 10 ff 4c 89 d6 48 8d 7c 24 10 e8 d2 e3 28 f9 48 85 c0 0f 84 fe 00 00 00 44 89 f2 49 89 04 d4 44 8d 72 01 <48> 8b 10 41 8b 4f 1c 48 c1 ea 10 83 e2 01 80 fa 01 19 d2 81 e2 01 RSP: 0018:ffffad99ceaebc50 EFLAGS: 00010246 RAX: 0000000000000402 RBX: 0000000000000001 RCX: 0000000000000002 RDX: 0000000000000000 RSI: ffff94c5af90bd98 RDI: ffffad99ceaebc60 RBP: ffff94ddc1749a00 R08: 0000000000000402 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000100 R12: ffff94de6c429ce0 R13: ffff94de6c4d3700 R14: 0000000000000001 R15: ffffad99ceaebd68 FS: 00007f228c5c7040(0000) GS:ffff94de8ed80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000402 CR3: 0000001dbd9b4000 CR4: 0000000000350ee0 Call Trace: read_pages+0x83/0x270 page_cache_readahead_unbounded+0x197/0x230 generic_file_buffered_read+0x57a/0xa20 new_sync_read+0x112/0x1a0 vfs_read+0xf8/0x180 ksys_read+0x5f/0xe0 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 042124cc64c3 ("mm: add new readahead_control API") Reported-by: David Sterba Reported-by: Wonhyuk Yang Signed-off-by: Matthew Wilcox (Oracle) Signed-off-by: Andrew Morton Cc: Link: https://lkml.kernel.org/r/20201103142852.8543-1-willy@infradead.org Link: https://lkml.kernel.org/r/20201103124349.16722-1-vvghjk1234@gmail.com Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

spi: Introduce device-managed SPI controller allocation

2020-11-24T12:39:11+00:00

commit 5e844cc37a5cbaa460e68f9a989d321d63088a89 upstream. SPI driver probing currently comprises two steps, whereas removal comprises only one step: spi_alloc_master() spi_register_controller() spi_unregister_controller() That's because spi_unregister_controller() calls device_unregister() instead of device_del(), thereby releasing the reference on the spi_controller which was obtained by spi_alloc_master(). An SPI driver's private data is contained in the same memory allocation as the spi_controller struct. Thus, once spi_unregister_controller() has been called, the private data is inaccessible. But some drivers need to access it after spi_unregister_controller() to perform further teardown steps. Introduce devm_spi_alloc_master() and devm_spi_alloc_slave(), which release a reference on the spi_controller struct only after the driver has unbound, thereby keeping the memory allocation accessible. Change spi_unregister_controller() to not release a reference if the spi_controller was allocated by one of these new devm functions. The present commit is small enough to be backportable to stable. It allows fixing drivers which use the private data in their ->remove() hook after it's been freed. It also allows fixing drivers which neglect to release a reference on the spi_controller in the probe error path. Long-term, most SPI drivers shall be moved over to the devm functions introduced herein. The few that can't shall be changed in a treewide commit to explicitly release the last reference on the controller. That commit shall amend spi_unregister_controller() to no longer release a reference, thereby completing the migration. As a result, the behaviour will be less surprising and more consistent with subsystems such as IIO, which also includes the private data in the allocation of the generic iio_dev struct, but calls device_del() in iio_device_unregister(). Signed-off-by: Lukas Wunner Link: https://lore.kernel.org/r/272bae2ef08abd21388c98e23729886663d19192.1605121038.git.lukas@wunner.de Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

sched: Fix data-race in wakeup

2020-11-24T12:39:06+00:00

[ Upstream commit f97bb5272d9e95d400d6c8643ebb146b3e3e7842 ] Mel reported that on some ARM64 platforms loadavg goes bananas and Will tracked it down to the following race: CPU0 CPU1 schedule() prev->sched_contributes_to_load = X; deactivate_task(prev); try_to_wake_up() if (p->on_rq &&) // false if (smp_load_acquire(&p->on_cpu) && // true ttwu_queue_wakelist()) p->sched_remote_wakeup = Y; smp_store_release(prev->on_cpu, 0); where both p->sched_contributes_to_load and p->sched_remote_wakeup are in the same word, and thus the stores X and Y race (and can clobber one another's data). Whereas prior to commit c6e7bd7afaeb ("sched/core: Optimize ttwu() spinning on p->on_cpu") the p->on_cpu handoff serialized access to p->sched_remote_wakeup (just as it still does with p->sched_contributes_to_load) that commit broke that by calling ttwu_queue_wakelist() with p->on_cpu != 0. However, due to p->XXX = X ttwu() schedule() if (p->on_rq && ...) // false smp_mb__after_spinlock() if (smp_load_acquire(&p->on_cpu) && deactivate_task() ttwu_queue_wakelist()) p->on_rq = 0; p->sched_remote_wakeup = Y; We can be sure any 'current' store is complete and 'current' is guaranteed asleep. Therefore we can move p->sched_remote_wakeup into the current flags word. Note: while the observed failure was loadavg accounting gone wrong due to ttwu() cobbering p->sched_contributes_to_load, the reverse problem is also possible where schedule() clobbers p->sched_remote_wakeup, this could result in enqueue_entity() wrecking ->vruntime and causing scheduling artifacts. Fixes: c6e7bd7afaeb ("sched/core: Optimize ttwu() spinning on p->on_cpu") Reported-by: Mel Gorman Debugged-by: Will Deacon Signed-off-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/20201117083016.GK3121392@hirez.programming.kicks-ass.net Signed-off-by: Sasha Levin

iommu/vt-d: Avoid panic if iommu init fails in tboot system

2020-11-24T12:39:04+00:00

[ Upstream commit 4d213e76a359e540ca786ee937da7f35faa8e5f8 ] "intel_iommu=off" command line is used to disable iommu but iommu is force enabled in a tboot system for security reason. However for better performance on high speed network device, a new option "intel_iommu=tboot_noforce" is introduced to disable the force on. By default kernel should panic if iommu init fail in tboot for security reason, but it's unnecessory if we use "intel_iommu=tboot_noforce,off". Fix the code setting force_on and move intel_iommu_tboot_noforce from tboot code to intel iommu code. Fixes: 7304e8f28bb2 ("iommu/vt-d: Correctly disable Intel IOMMU force on") Signed-off-by: Zhenzhong Duan Tested-by: Lukasz Hawrylko Acked-by: Lu Baolu Link: https://lore.kernel.org/r/20201110071908.3133-1-zhenzhong.duan@gmail.com Signed-off-by: Will Deacon Signed-off-by: Sasha Levin

iommu/vt-d: Move intel_iommu_gfx_mapped to Intel IOMMU header

2020-11-24T12:39:03+00:00

[ Upstream commit c7eb900f5f45eeab1ea1bed997a2a12d8b5907bc ] Static analyzer is not happy about intel_iommu_gfx_mapped declaration: .../drivers/iommu/intel/iommu.c:364:5: warning: symbol 'intel_iommu_gfx_mapped' was not declared. Should it be static? Move its declaration to Intel IOMMU header file. Signed-off-by: Andy Shevchenko Reviewed-by: Lu Baolu Link: https://lore.kernel.org/r/20200828161212.71294-1-andriy.shevchenko@linux.intel.com Signed-off-by: Joerg Roedel Signed-off-by: Sasha Levin

swiotlb: using SIZE_MAX needs limits.h included

2020-11-24T12:38:57+00:00

[ Upstream commit f51778db088b2407ec177f2f4da0f6290602aa3f ] After merging the drm-misc tree, linux-next build (arm multi_v7_defconfig) failed like this: In file included from drivers/gpu/drm/nouveau/nouveau_ttm.c:26: include/linux/swiotlb.h: In function 'swiotlb_max_mapping_size': include/linux/swiotlb.h:99:9: error: 'SIZE_MAX' undeclared (first use in this function) 99 | return SIZE_MAX; | ^~~~~~~~ include/linux/swiotlb.h:7:1: note: 'SIZE_MAX' is defined in header ''; did you forget to '#include '? 6 | #include +++ |+#include 7 | #include include/linux/swiotlb.h:99:9: note: each undeclared identifier is reported only once for each function it appears in 99 | return SIZE_MAX; | ^~~~~~~~ Caused by commit abe420bfae52 ("swiotlb: Introduce swiotlb_max_mapping_size()") but only exposed by commit "drm/nouveu: fix swiotlb include" Fix it by including linux/limits.h as appropriate. Fixes: abe420bfae52 ("swiotlb: Introduce swiotlb_max_mapping_size()") Signed-off-by: Stephen Rothwell Link: https://lore.kernel.org/r/20201102124327.2f82b2a7@canb.auug.org.au Signed-off-by: Michael S. Tsirkin Signed-off-by: Sasha Levin

PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter

2020-11-24T12:38:51+00:00

[ Upstream commit dd8088d5a8969dc2b42f71d7bc01c25c61a78066 ] In many case, we need to check return value of pm_runtime_get_sync, but it brings a trouble to the usage counter processing. Many callers forget to decrease the usage counter when it failed, which could resulted in reference leak. It has been discussed a lot[0][1]. So we add a function to deal with the usage counter for better coding. [0]https://lkml.org/lkml/2020/6/14/88 [1]https://patchwork.ozlabs.org/project/linux-tegra/list/?series=178139 Signed-off-by: Zhang Qilong Acked-by: Rafael J. Wysocki Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman