kernel/linux.git/include/linux, branch v5.3-rc8

Merge tag 'compiler-attributes-for-linus-v5.3-rc8' of git://github.com/ojeda/linux

2019-09-08T16:34:55+00:00

Pull section attribute fix from Miguel Ojeda: "Fix Oops in Clang-compiled kernels (Nick Desaulniers)" * tag 'compiler-attributes-for-linus-v5.3-rc8' of git://github.com/ojeda/linux: include/linux/compiler.h: fix Oops for Clang-compiled kernels

include/linux/compiler.h: fix Oops for Clang-compiled kernels

2019-09-08T12:53:58+00:00

GCC unescapes escaped string section names while Clang does not. Because __section uses the `#` stringification operator for the section name, it doesn't need to be escaped. This fixes an Oops observed in distro's that use systemd and not net.core.bpf_jit_enable=1, when their kernels are compiled with Clang. Link: https://github.com/ClangBuiltLinux/linux/issues/619 Link: https://bugs.llvm.org/show_bug.cgi?id=42950 Link: https://marc.info/?l=linux-netdev&m=156412960619946&w=2 Link: https://lore.kernel.org/lkml/20190904181740.GA19688@gmail.com/ Acked-by: Will Deacon Reported-by: Sedat Dilek Suggested-by: Josh Poimboeuf Tested-by: Sedat Dilek Signed-off-by: Nick Desaulniers [Cherry-picked from the __section cleanup series for 5.3] [Adjusted commit message] Signed-off-by: Miguel Ojeda

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2019-09-06T23:12:30+00:00

Pull input fix from Dmitry Torokhov: "A tiny update from Benjamin removing a mistakenly added Elan PNP ID so that the device is again handled by hid-multitouch" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - remove Lenovo Legion Y7000 PnpID

Input: elan_i2c - remove Lenovo Legion Y7000 PnpID

2019-09-06T22:40:22+00:00

Looks like the Bios of the Lenovo Legion Y7000 is using ELAN061B when the actual device is supposed to be used with hid-multitouch. Remove it from the list of the supported device, hoping that no one will complain about the loss in functionality. Link: https://bugzilla.kernel.org/show_bug.cgi?id=203467 Fixes: 738c06d0e456 ("Input: elan_i2c - add hardware ID for multiple Lenovo laptops") Signed-off-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov

Merge tag 'iommu-fixes-v5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

2019-09-06T19:22:36+00:00

Pull IOMMU fixes from Joerg Roedel: - Revert an Intel VT-d patch that caused problems for some users. - Removal of a feature in the Intel VT-d driver that was never supported in hardware. This qualifies as a fix because the code for this feature sets reserved bits in the invalidation queue descriptor, causing failed invalidations on real hardware. - Two fixes for AMD IOMMU driver to fix a race condition and to add a missing IOTLB flush when kernel is booted in kdump mode. * tag 'iommu-fixes-v5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: Fix race in increase_address_space() iommu/amd: Flush old domains in kdump kernel iommu/vt-d: Remove global page flush support Revert "iommu/vt-d: Avoid duplicated pci dma alias consideration"

iommu/vt-d: Remove global page flush support

2019-09-03T13:01:27+00:00

Global pages support is removed from VT-d spec 3.0. Since global pages G flag only affects first-level paging structures and because DMA request with PASID are only supported by VT-d spec. 3.0 and onward, we can safely remove global pages support. For kernel shared virtual address IOTLB invalidation, PASID granularity and page selective within PASID will be used. There is no global granularity supported. Without this fix, IOTLB invalidation will cause invalid descriptor error in the queued invalidation (QI) interface. Fixes: 1c4f88b7f1f9 ("iommu/vt-d: Shared virtual address in scalable mode") Reported-by: Sanjay K Kumar Signed-off-by: Jacob Pan Signed-off-by: Joerg Roedel

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2019-09-02T01:45:28+00:00

Pull networking fixes from David Miller: 1) Fix some length checks during OGM processing in batman-adv, from Sven Eckelmann. 2) Fix regression that caused netfilter conntrack sysctls to not be per-netns any more. From Florian Westphal. 3) Use after free in netpoll, from Feng Sun. 4) Guard destruction of pfifo_fast per-cpu qdisc stats with qdisc_is_percpu_stats(), from Davide Caratti. Similar bug is fixed in pfifo_fast_enqueue(). 5) Fix memory leak in mld_del_delrec(), from Eric Dumazet. 6) Handle neigh events on internal ports correctly in nfp, from John Hurley. 7) Clear SKB timestamp in NF flow table code so that it does not confuse fq scheduler. From Florian Westphal. 8) taprio destroy can crash if it is invoked in a failure path of taprio_init(), because the list head isn't setup properly yet and the list del is unconditional. Perform the list add earlier to address this. From Vladimir Oltean. 9) Make sure to reapply vlan filters on device up, in aquantia driver. From Dmitry Bogdanov. 10) sgiseeq driver releases DMA memory using free_page() instead of dma_free_attrs(). From Christophe JAILLET. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits) net: seeq: Fix the function used to release some memory in an error handling path enetc: Add missing call to 'pci_free_irq_vectors()' in probe and remove functions net: bcmgenet: use ethtool_op_get_ts_info() tc-testing: don't hardcode 'ip' in nsPlugin.py net: dsa: microchip: add KSZ8563 compatibility string dt-bindings: net: dsa: document additional Microchip KSZ8563 switch net: aquantia: fix out of memory condition on rx side net: aquantia: linkstate irq should be oneshot net: aquantia: reapply vlan filters on up net: aquantia: fix limit of vlan filters net: aquantia: fix removal of vlan 0 net/sched: cbs: Set default link speed to 10 Mbps in cbs_set_port_rate taprio: Set default link speed to 10 Mbps in taprio_set_picos_per_byte taprio: Fix kernel panic in taprio_destroy net: dsa: microchip: fill regmap_config name rxrpc: Fix lack of conn cleanup when local endpoint is cleaned up [ver #2] net: stmmac: dwmac-rk: Don't fail if phy regulator is absent amd-xgbe: Fix error path in xgbe_mod_init() netfilter: nft_meta_bridge: Fix get NFT_META_BRI_IIFVPROTO in network byteorder mac80211: Correctly set noencrypt for PAE frames ...

Merge tag 'trace-v5.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

2019-08-31T16:15:25+00:00

Pull tracing fixes from Steven Rostedt: "Small fixes and minor cleanups for tracing: - Make exported ftrace function not static - Fix NULL pointer dereference in reading probes as they are created - Fix NULL pointer dereference in k/uprobe clean up path - Various documentation fixes" * tag 'trace-v5.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Correct kdoc formats ftrace/x86: Remove mcount() declaration tracing/probe: Fix null pointer dereference tracing: Make exported ftrace_set_clr_event non-static ftrace: Check for successful allocation of hash ftrace: Check for empty hash and comment the race with registering probes ftrace: Fix NULL pointer dereference in t_probe_next()

tracing: Make exported ftrace_set_clr_event non-static

2019-08-31T10:51:49+00:00

The function ftrace_set_clr_event is declared static and marked EXPORT_SYMBOL_GPL(), which is at best an odd combination. Because the function was decided to be a part of API, this commit removes the static attribute and adds the declaration to the header. Link: http://lkml.kernel.org/r/20190704172110.27041-1-efremov@linux.com Fixes: f45d1225adb04 ("tracing: Kernel access to Ftrace instances") Reviewed-by: Joe Jin Signed-off-by: Denis Efremov Signed-off-by: Steven Rostedt (VMware)

mm: memcontrol: flush percpu slab vmstats on kmem offlining

2019-08-31T01:00:50+00:00

I've noticed that the "slab" value in memory.stat is sometimes 0, even if some children memory cgroups have a non-zero "slab" value. The following investigation showed that this is the result of the kmem_cache reparenting in combination with the per-cpu batching of slab vmstats. At the offlining some vmstat value may leave in the percpu cache, not being propagated upwards by the cgroup hierarchy. It means that stats on ancestor levels are lower than actual. Later when slab pages are released, the precise number of pages is substracted on the parent level, making the value negative. We don't show negative values, 0 is printed instead. To fix this issue, let's flush percpu slab memcg and lruvec stats on memcg offlining. This guarantees that numbers on all ancestor levels are accurate and match the actual number of outstanding slab pages. Link: http://lkml.kernel.org/r/20190819202338.363363-3-guro@fb.com Fixes: fb2f2b0adb98 ("mm: memcg/slab: reparent memcg kmem_caches on cgroup removal") Signed-off-by: Roman Gushchin Cc: Johannes Weiner Cc: Michal Hocko Cc: Vladimir Davydov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds