kernel/linux.git/include/linux, branch v5.18.16

mm: fix missing wake-up event for FSDAX pages

2022-08-03T10:05:17+00:00

commit f4f451a16dd1f478fdb966bcbb612c1e4ce6b962 upstream. FSDAX page refcounts are 1-based, rather than 0-based: if refcount is 1, then the page is freed. The FSDAX pages can be pinned through GUP, then they will be unpinned via unpin_user_page() using a folio variant to put the page, however, folio variants did not consider this special case, the result will be to miss a wakeup event (like the user of __fuse_dax_break_layouts()). This results in a task being permanently stuck in TASK_INTERRUPTIBLE state. Since FSDAX pages are only possibly obtained by GUP users, so fix GUP instead of folio_put() to lower overhead. Link: https://lkml.kernel.org/r/20220705123532.283-1-songmuchun@bytedance.com Fixes: d8ddc099c6b3 ("mm/gup: Add gup_put_folio()") Signed-off-by: Muchun Song Suggested-by: Matthew Wilcox Cc: Jason Gunthorpe Cc: John Hubbard Cc: William Kucharski Cc: Dan Williams Cc: Jan Kara Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman

objtool: Re-add UNWIND_HINT_{SAVE_RESTORE}

2022-07-23T10:56:53+00:00

commit 8faea26e611189e933ea2281975ff4dc7c1106b6 upstream. Commit c536ed2fffd5 ("objtool: Remove SAVE/RESTORE hints") removed the save/restore unwind hints because they were no longer needed. Now they're going to be needed again so re-add them. Signed-off-by: Josh Poimboeuf Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Borislav Petkov Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Greg Kroah-Hartman

objtool: Add entry UNRET validation

2022-07-23T10:56:51+00:00

commit a09a6e2399ba0595c3042b3164f3ca68a3cff33e upstream. Since entry asm is tricky, add a validation pass that ensures the retbleed mitigation has been done before the first actual RET instruction. Entry points are those that either have UNWIND_HINT_ENTRY, which acts as UNWIND_HINT_EMPTY but marks the instruction as an entry point, or those that have UWIND_HINT_IRET_REGS at +0. This is basically a variant of validate_branch() that is intra-function and it will simply follow all branches from marked entry points and ensures that all paths lead to ANNOTATE_UNRET_END. If a path hits RET or an indirection the path is a fail and will be reported. There are 3 ANNOTATE_UNRET_END instances: - UNTRAIN_RET itself - exception from-kernel; this path doesn't need UNTRAIN_RET - all early exceptions; these also don't need UNTRAIN_RET Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Borislav Petkov Reviewed-by: Josh Poimboeuf Signed-off-by: Borislav Petkov [cascardo: tools/objtool/builtin-check.c no link option validation] [cascardo: tools/objtool/check.c opts.ibt is ibt] [cascardo: tools/objtool/include/objtool/builtin.h leave unret option as bool, no struct opts] [cascardo: objtool is still called from scripts/link-vmlinux.sh] Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Greg Kroah-Hartman

x86/bugs: Report AMD retbleed vulnerability

2022-07-23T10:56:47+00:00

commit 6b80b59b3555706508008f1f127b5412c89c7fd8 upstream. Report that AMD x86 CPUs are vulnerable to the RETBleed (Arbitrary Speculative Code Execution with Return Instructions) attack. [peterz: add hygon] [kim: invert parity; fam15h] Co-developed-by: Kim Phillips Signed-off-by: Kim Phillips Signed-off-by: Alexandre Chartre Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Borislav Petkov Reviewed-by: Josh Poimboeuf Signed-off-by: Borislav Petkov Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Greg Kroah-Hartman

x86/kvm/vmx: Make noinstr clean

2022-07-23T10:56:42+00:00

commit 742ab6df974ae8384a2dd213db1a3a06cf6d8936 upstream. The recent mmio_stale_data fixes broke the noinstr constraints: vmlinux.o: warning: objtool: vmx_vcpu_enter_exit+0x15b: call to wrmsrl.constprop.0() leaves .noinstr.text section vmlinux.o: warning: objtool: vmx_vcpu_enter_exit+0x1bf: call to kvm_arch_has_assigned_device() leaves .noinstr.text section make it all happy again. Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Borislav Petkov Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Greg Kroah-Hartman

serial: 8250: Fix PM usage_count for console handover

2022-07-22T08:21:58+00:00

commit f9b11229b79c0fb2100b5bb4628a101b1d37fbf6 upstream. When console is enabled, univ8250_console_setup() calls serial8250_console_setup() before .dev is set to uart_port. Therefore, it will not call pm_runtime_get_sync(). Later, when the actual driver is going to take over univ8250_console_exit() is called. As .dev is already set, serial8250_console_exit() makes pm_runtime_put_sync() call with usage count being zero triggering PM usage count warning (extra debug for univ8250_console_setup(), univ8250_console_exit(), and serial8250_register_ports()): [ 0.068987] univ8250_console_setup ttyS0 nodev [ 0.499670] printk: console [ttyS0] enabled [ 0.717955] printk: console [ttyS0] printing thread started [ 1.960163] serial8250_register_ports assigned dev for ttyS0 [ 1.976830] printk: console [ttyS0] disabled [ 1.976888] printk: console [ttyS0] printing thread stopped [ 1.977073] univ8250_console_exit ttyS0 usage:0 [ 1.977075] serial8250 serial8250: Runtime PM usage count underflow! [ 1.977429] dw-apb-uart.6: ttyS0 at MMIO 0x4010006000 (irq = 33, base_baud = 115200) is a 16550A [ 1.977812] univ8250_console_setup ttyS0 usage:2 [ 1.978167] printk: console [ttyS0] printing thread started [ 1.978203] printk: console [ttyS0] enabled To fix the issue, call pm_runtime_get_sync() in serial8250_register_ports() as soon as .dev is set for an uart_port if it has console enabled. This problem became apparent only recently because 82586a721595 ("PM: runtime: Avoid device usage count underflows") added the warning printout. I confirmed this problem also occurs with v5.18 (w/o the warning printout, obviously). Fixes: bedb404e91bb ("serial: 8250_port: Don't use power management for kernel console") Cc: stable Tested-by: Tony Lindgren Reviewed-by: Andy Shevchenko Reviewed-by: Tony Lindgren Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/b4f428e9-491f-daf2-2232-819928dc276e@linux.intel.com Signed-off-by: Greg Kroah-Hartman

nvme: use struct group for generic command dwords

2022-07-22T08:21:55+00:00

[ Upstream commit 5c629dc9609dc43492a7bc8060cc6120875bf096 ] This will allow the trace event to know the full size of the data intended to be copied and silence read overflow checks. Reported-by: John Garry Suggested-by: Christoph Hellwig Signed-off-by: Keith Busch Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin

firmware: sysfb: Add sysfb_disable() helper function

2022-07-22T08:21:48+00:00

[ Upstream commit bde376e9de3c0bc55eedc8956b0f114c05531595 ] This can be used by subsystems to unregister a platform device registered by sysfb and also to disable future platform device registration in sysfb. Suggested-by: Daniel Vetter Signed-off-by: Javier Martinez Canillas Reviewed-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20220607182338.344270-3-javierm@redhat.com Signed-off-by: Sasha Levin

firmware: sysfb: Make sysfb_create_simplefb() return a pdev pointer

2022-07-22T08:21:48+00:00

[ Upstream commit 9e121040e54abef9ed5542e5fdfa87911cd96204 ] This function just returned 0 on success or an errno code on error, but it could be useful for sysfb_init() callers to have a pointer to the device. Signed-off-by: Javier Martinez Canillas Reviewed-by: Daniel Vetter Reviewed-by: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/20220607182338.344270-2-javierm@redhat.com Signed-off-by: Sasha Levin

netfs: do not unlock and put the folio twice

2022-07-22T08:21:42+00:00

[ Upstream commit fac47b43c760ea90e64b895dba60df0327be7775 ] check_write_begin() will unlock and put the folio when return non-zero. So we should avoid unlocking and putting it twice in netfs layer. Change the way ->check_write_begin() works in the following two ways: (1) Pass it a pointer to the folio pointer, allowing it to unlock and put the folio prior to doing the stuff it wants to do, provided it clears the folio pointer. (2) Change the return values such that 0 with folio pointer set means continue, 0 with folio pointer cleared means re-get and all error codes indicating an error (no special treatment for -EAGAIN). [ bagasdotme: use Sphinx code text syntax for *foliop pointer ] Cc: stable@vger.kernel.org Link: https://tracker.ceph.com/issues/56423 Link: https://lore.kernel.org/r/cf169f43-8ee7-8697-25da-0204d1b4343e@redhat.com Co-developed-by: David Howells Signed-off-by: Xiubo Li Signed-off-by: David Howells Signed-off-by: Bagas Sanjaya Signed-off-by: Ilya Dryomov Signed-off-by: Sasha Levin