kernel/linux.git/include/linux, branch v5.11.12

soc: qcom-geni-se: Cleanup the code to remove proxy votes

2021-04-07T13:02:35+00:00

commit 29d96eb261345c8d888e248ae79484e681be2faa upstream. This reverts commit 048eb908a1f2 ("soc: qcom-geni-se: Add interconnect support to fix earlycon crash") ICC core and platforms drivers supports sync_state feature, which ensures that the default ICC BW votes from the bootloader is not removed until all it's consumers are probes. The proxy votes were needed in case other QUP child drivers I2C, SPI probes before UART, they can turn off the QUP-CORE clock which is shared resources for all QUP driver, this causes unclocked access to HW from earlycon. Given above support from ICC there is no longer need to maintain proxy votes on QUP-CORE ICC node from QUP wrapper driver for early console usecase, the default votes won't be removed until real console is probed. Cc: stable@vger.kernel.org Fixes: 266cd33b5913 ("interconnect: qcom: Ensure that the floor bandwidth value is enforced") Fixes: 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state") Signed-off-by: Roja Rani Yarubandi Signed-off-by: Akash Asthana Reviewed-by: Matthias Kaehlcke Link: https://lore.kernel.org/r/20210324101836.25272-2-rojay@codeaurora.org Signed-off-by: Greg Kroah-Hartman

firmware: stratix10-svc: reset COMMAND_RECONFIG_FLAG_PARTIAL to 0

2021-04-07T13:02:33+00:00

[ Upstream commit 2e8496f31d0be8f43849b2980b069f3a9805d047 ] Clean up COMMAND_RECONFIG_FLAG_PARTIAL flag by resetting it to 0, which aligns with the firmware settings. Fixes: 36847f9e3e56 ("firmware: stratix10-svc: correct reconfig flag and timeout values") Signed-off-by: Richard Gong Reviewed-by: Tom Rix Signed-off-by: Moritz Fischer Signed-off-by: Sasha Levin

extcon: Add stubs for extcon_register_notifier_all() functions

2021-04-07T13:02:33+00:00

[ Upstream commit c9570d4a5efd04479b3cd09c39b571eb031d94f4 ] Add stubs for extcon_register_notifier_all() function for !CONFIG_EXTCON case. This is useful for compile testing and for drivers which use EXTCON but do not require it (therefore do not depend on CONFIG_EXTCON). Fixes: 815429b39d94 ("extcon: Add new extcon_register_notifier_all() to monitor all external connectors") Reported-by: kernel test robot Signed-off-by: Krzysztof Kozlowski Signed-off-by: Chanwoo Choi Signed-off-by: Sasha Levin

ACPI: tables: x86: Reserve memory occupied by ACPI tables

2021-04-07T13:02:30+00:00

commit 1a1c130ab7575498eed5bcf7220037ae09cd1f8a upstream. The following problem has been reported by George Kennedy: Since commit 7fef431be9c9 ("mm/page_alloc: place pages to tail in __free_pages_core()") the following use after free occurs intermittently when ACPI tables are accessed. BUG: KASAN: use-after-free in ibft_init+0x134/0xc49 Read of size 4 at addr ffff8880be453004 by task swapper/0/1 CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc1-7a7fd0d #1 Call Trace: dump_stack+0xf6/0x158 print_address_description.constprop.9+0x41/0x60 kasan_report.cold.14+0x7b/0xd4 __asan_report_load_n_noabort+0xf/0x20 ibft_init+0x134/0xc49 do_one_initcall+0xc4/0x3e0 kernel_init_freeable+0x5af/0x66b kernel_init+0x16/0x1d0 ret_from_fork+0x22/0x30 ACPI tables mapped via kmap() do not have their mapped pages reserved and the pages can be "stolen" by the buddy allocator. Apparently, on the affected system, the ACPI table in question is not located in "reserved" memory, like ACPI NVS or ACPI Data, that will not be used by the buddy allocator, so the memory occupied by that table has to be explicitly reserved to prevent the buddy allocator from using it. In order to address this problem, rearrange the initialization of the ACPI tables on x86 to locate the initial tables earlier and reserve the memory occupied by them. The other architectures using ACPI should not be affected by this change. Link: https://lore.kernel.org/linux-acpi/1614802160-29362-1-git-send-email-george.kennedy@oracle.com/ Reported-by: George Kennedy Tested-by: George Kennedy Signed-off-by: Rafael J. Wysocki Reviewed-by: Mike Rapoport Cc: 5.10+ # 5.10+ Signed-off-by: Greg Kroah-Hartman

net: introduce CAN specific pointer in the struct net_device

2021-04-07T13:02:28+00:00

[ Upstream commit 4e096a18867a5a989b510f6999d9c6b6622e8f7b ] Since 20dd3850bcf8 ("can: Speed up CAN frame receiption by using ml_priv") the CAN framework uses per device specific data in the AF_CAN protocol. For this purpose the struct net_device->ml_priv is used. Later the ml_priv usage in CAN was extended for other users, one of them being CAN_J1939. Later in the kernel ml_priv was converted to an union, used by other drivers. E.g. the tun driver started storing it's stats pointer. Since tun devices can claim to be a CAN device, CAN specific protocols will wrongly interpret this pointer, which will cause system crashes. Mostly this issue is visible in the CAN_J1939 stack. To fix this issue, we request a dedicated CAN pointer within the net_device struct. Reported-by: syzbot+5138c4dd15a0401bec7b@syzkaller.appspotmail.com Fixes: 20dd3850bcf8 ("can: Speed up CAN frame receiption by using ml_priv") Fixes: ffd956eef69b ("can: introduce CAN midlayer private and allocate it automatically") Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Fixes: 497a5757ce4e ("tun: switch to net core provided statistics counters") Signed-off-by: Oleksij Rempel Link: https://lore.kernel.org/r/20210223070127.4538-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

locking/ww_mutex: Fix acquire/release imbalance in ww_acquire_init()/ww_acquire_fini()

2021-04-07T13:02:26+00:00

[ Upstream commit bee645788e07eea63055d261d2884ea45c2ba857 ] In ww_acquire_init(), mutex_acquire() is gated by CONFIG_DEBUG_LOCK_ALLOC. The dep_map in the ww_acquire_ctx structure is also gated by the same config. However mutex_release() in ww_acquire_fini() is gated by CONFIG_DEBUG_MUTEXES. It is possible to set CONFIG_DEBUG_MUTEXES without setting CONFIG_DEBUG_LOCK_ALLOC though it is an unlikely configuration. That may cause a compilation error as dep_map isn't defined in this case. Fix this potential problem by enclosing mutex_release() inside CONFIG_DEBUG_LOCK_ALLOC. Signed-off-by: Waiman Long Signed-off-by: Ingo Molnar Link: https://lore.kernel.org/r/20210316153119.13802-3-longman@redhat.com Signed-off-by: Sasha Levin

fs/cachefiles: Remove wait_bit_key layout dependency

2021-03-30T12:30:30+00:00

commit 39f985c8f667c80a3d1eb19d31138032fa36b09e upstream. Cachefiles was relying on wait_page_key and wait_bit_key being the same layout, which is fragile. Now that wait_page_key is exposed in the pagemap.h header, we can remove that fragility A comment on the need to maintain structure layout equivalence was added by Linus[1] and that is no longer applicable. Fixes: 62906027091f ("mm: add PageWaiters indicating tasks are waiting for a page bit") Signed-off-by: Matthew Wilcox (Oracle) Reviewed-by: Christoph Hellwig Signed-off-by: David Howells Tested-by: kafs-testing@auristor.com cc: linux-cachefs@redhat.com cc: linux-mm@kvack.org Link: https://lore.kernel.org/r/20210320054104.1300774-2-willy@infradead.org/ Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=3510ca20ece0150af6b10c77a74ff1b5c198e3e2 [1] Signed-off-by: Greg Kroah-Hartman

locking/mutex: Fix non debug version of mutex_lock_io_nested()

2021-03-30T12:30:30+00:00

commit 291da9d4a9eb3a1cb0610b7f4480f5b52b1825e7 upstream. If CONFIG_DEBUG_LOCK_ALLOC=n then mutex_lock_io_nested() maps to mutex_lock() which is clearly wrong because mutex_lock() lacks the io_schedule_prepare()/finish() invocations. Map it to mutex_lock_io(). Fixes: f21860bac05b ("locking/mutex, sched/wait: Fix the mutex_lock_io_nested() define") Signed-off-by: Thomas Gleixner Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Ingo Molnar Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/878s6fshii.fsf@nanos.tec.linutronix.de Signed-off-by: Greg Kroah-Hartman

mm/mmu_notifiers: ensure range_end() is paired with range_start()

2021-03-30T12:30:28+00:00

[ Upstream commit c2655835fd8cabdfe7dab737253de3ffb88da126 ] If one or more notifiers fails .invalidate_range_start(), invoke .invalidate_range_end() for "all" notifiers. If there are multiple notifiers, those that did not fail are expecting _start() and _end() to be paired, e.g. KVM's mmu_notifier_count would become imbalanced. Disallow notifiers that can fail _start() from implementing _end() so that it's unnecessary to either track which notifiers rejected _start(), or had already succeeded prior to a failed _start(). Note, the existing behavior of calling _start() on all notifiers even after a previous notifier failed _start() was an unintented "feature". Make it canon now that the behavior is depended on for correctness. As of today, the bug is likely benign: 1. The only caller of the non-blocking notifier is OOM kill. 2. The only notifiers that can fail _start() are the i915 and Nouveau drivers. 3. The only notifiers that utilize _end() are the SGI UV GRU driver and KVM. 4. The GRU driver will never coincide with the i195/Nouveau drivers. 5. An imbalanced kvm->mmu_notifier_count only causes soft lockup in the _guest_, and the guest is already doomed due to being an OOM victim. Fix the bug now to play nice with future usage, e.g. KVM has a potential use case for blocking memslot updates in KVM while an invalidation is in-progress, and failure to unblock would result in said updates being blocked indefinitely and hanging. Found by inspection. Verified by adding a second notifier in KVM that periodically returns -EAGAIN on non-blockable ranges, triggering OOM, and observing that KVM exits with an elevated notifier count. Link: https://lkml.kernel.org/r/20210311180057.1582638-1-seanjc@google.com Fixes: 93065ac753e4 ("mm, oom: distinguish blockable mode for mmu notifiers") Signed-off-by: Sean Christopherson Suggested-by: Jason Gunthorpe Reviewed-by: Jason Gunthorpe Cc: David Rientjes Cc: Ben Gardon Cc: Michal Hocko Cc: "Jérôme Glisse" Cc: Andrea Arcangeli Cc: Johannes Weiner Cc: Dimitri Sivanich Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

dm table: Fix zoned model check and zone sectors check

2021-03-30T12:30:28+00:00

[ Upstream commit 2d669ceb69c276f7637cf760287ca4187add082e ] Commit 24f6b6036c9e ("dm table: fix zoned iterate_devices based device capability checks") triggered dm table load failure when dm-zoned device is set up for zoned block devices and a regular device for cache. The commit inverted logic of two callback functions for iterate_devices: device_is_zoned_model() and device_matches_zone_sectors(). The logic of device_is_zoned_model() was inverted then all destination devices of all targets in dm table are required to have the expected zoned model. This is fine for dm-linear, dm-flakey and dm-crypt on zoned block devices since each target has only one destination device. However, this results in failure for dm-zoned with regular cache device since that target has both regular block device and zoned block devices. As for device_matches_zone_sectors(), the commit inverted the logic to require all zoned block devices in each target have the specified zone_sectors. This check also fails for regular block device which does not have zones. To avoid the check failures, fix the zone model check and the zone sectors check. For zone model check, introduce the new feature flag DM_TARGET_MIXED_ZONED_MODEL, and set it to dm-zoned target. When the target has this flag, allow it to have destination devices with any zoned model. For zone sectors check, skip the check if the destination device is not a zoned block device. Also add comments and improve an error message to clarify expectations to the two checks. Fixes: 24f6b6036c9e ("dm table: fix zoned iterate_devices based device capability checks") Signed-off-by: Shin'ichiro Kawasaki Signed-off-by: Damien Le Moal Signed-off-by: Mike Snitzer Signed-off-by: Sasha Levin