kernel/linux.git/include/linux, branch v5.10.185

Remove DECnet support from kernel

2023-06-21T13:45:38+00:00

commit 1202cdd665315c525b5237e96e0bedc76d7e754f upstream. DECnet is an obsolete network protocol that receives more attention from kernel janitors than users. It belongs in computer protocol history museum not in Linux kernel. It has been "Orphaned" in kernel since 2010. The iproute2 support for DECnet was dropped in 5.0 release. The documentation link on Sourceforge says it is abandoned there as well. Leave the UAPI alone to keep userspace programs compiling. This means that there is still an empty neighbour table for AF_DECNET. The table of /proc/sys/net entries was updated to match current directories and reformatted to be alphabetical. Signed-off-by: Stephen Hemminger Acked-by: David Ahern Acked-by: Nikolay Aleksandrov Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

kernel.h: split out kstrtox() and simple_strtox() to a separate header

2023-06-21T13:45:35+00:00

[ Upstream commit 4c52729377eab025b238caeed48994a39c3b73f2 ] kernel.h is being used as a dump for all kinds of stuff for a long time. Here is the attempt to start cleaning it up by splitting out kstrtox() and simple_strtox() helpers. At the same time convert users in header and lib folders to use new header. Though for time being include new header back to kernel.h to avoid twisted indirected includes for existing users. [andy.shevchenko@gmail.com: fix documentation references] Link: https://lkml.kernel.org/r/20210615220003.377901-1-andy.shevchenko@gmail.com Link: https://lkml.kernel.org/r/20210611185815.44103-1-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko Acked-by: Jonathan Cameron Cc: Francis Laniel Cc: Randy Dunlap Cc: Kars Mulder Cc: Trond Myklebust Cc: Anna Schumaker Cc: "J. Bruce Fields" Cc: Chuck Lever Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Stable-dep-of: 4acfe3dfde68 ("test_firmware: prevent race conditions by a correct implementation of locking") Signed-off-by: Sasha Levin

usb: usbfs: Enforce page requirements for mmap

2023-06-14T09:09:55+00:00

commit 0143d148d1e882fb1538dc9974c94d63961719b9 upstream. The current implementation of usbdev_mmap uses usb_alloc_coherent to allocate memory pages that will later be mapped into the user space. Meanwhile, usb_alloc_coherent employs three different methods to allocate memory, as outlined below: * If hcd->localmem_pool is non-null, it uses gen_pool_dma_alloc to allocate memory; * If DMA is not available, it uses kmalloc to allocate memory; * Otherwise, it uses dma_alloc_coherent. However, it should be noted that gen_pool_dma_alloc does not guarantee that the resulting memory will be page-aligned. Furthermore, trying to map slab pages (i.e., memory allocated by kmalloc) into the user space is not resonable and can lead to problems, such as a type confusion bug when PAGE_TABLE_CHECK=y [1]. To address these issues, this patch introduces hcd_alloc_coherent_pages, which addresses the above two problems. Specifically, hcd_alloc_coherent_pages uses gen_pool_dma_alloc_align instead of gen_pool_dma_alloc to ensure that the memory is page-aligned. To replace kmalloc, hcd_alloc_coherent_pages directly allocates pages by calling __get_free_pages. Reported-by: syzbot+fcf1a817ceb50935ce99@syzkaller.appspotmail.comm Closes: https://lore.kernel.org/lkml/000000000000258e5e05fae79fc1@google.com/ [1] Fixes: f7d34b445abc ("USB: Add support for usbfs zerocopy.") Fixes: ff2437befd8f ("usb: host: Fix excessive alignment restriction for local memory allocations") Cc: stable@vger.kernel.org Signed-off-by: Ruihan Li Acked-by: Alan Stern Link: https://lore.kernel.org/r/20230515130958.32471-2-lrh2000@pku.edu.cn Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman

rfs: annotate lockless accesses to RFS sock flow table

2023-06-14T09:09:43+00:00

[ Upstream commit 5c3b74a92aa285a3df722bf6329ba7ccf70346d6 ] Add READ_ONCE()/WRITE_ONCE() on accesses to the sock flow table. This also prevents a (smart ?) compiler to remove the condition in: if (table->ents[index] != newval) table->ents[index] = newval; We need the condition to avoid dirtying a shared cache line. Fixes: fec5e652e58f ("rfs: Receive Flow Steering") Signed-off-by: Eric Dumazet Reviewed-by: Simon Horman Reviewed-by: Kuniyuki Iwashima Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

regulator: Add regmap helper for ramp-delay setting

2023-06-05T07:07:03+00:00

[ Upstream commit fb8fee9efdcf084d9e31ba14cc4734d97e5dd972 ] Quite a few regulator ICs do support setting ramp-delay by writing a value matching the delay to a ramp-delay register. Provide a simple helper for table-based delay setting. Signed-off-by: Matti Vaittinen Link: https://lore.kernel.org/r/f101f1db564cf32cb58719c77af0b00d7236bb89.1617020713.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown Stable-dep-of: d67dada3e252 ("regulator: pca9450: Fix BUCK2 enable_mask") Signed-off-by: Sasha Levin

power: supply: core: Refactor power_supply_set_input_current_limit_from_supplier()

2023-06-05T07:07:03+00:00

[ Upstream commit 2220af8ca61ae67de4ec3deec1c6395a2f65b9fd ] Some (USB) charger ICs have variants with USB D+ and D- pins to do their own builtin charger-type detection, like e.g. the bq24190 and bq25890 and also variants which lack this functionality, e.g. the bq24192 and bq25892. In case the charger-type; and thus the input-current-limit detection is done outside the charger IC then we need some way to communicate this to the charger IC. In the past extcon was used for this, but if the external detection does e.g. full USB PD negotiation then the extcon cable-types do not convey enough information. For these setups it was decided to model the external charging "brick" and the parameters negotiated with it as a power_supply class-device itself; and power_supply_set_input_current_limit_from_supplier() was introduced to allow drivers to get the input-current-limit this way. But in some cases psy drivers may want to know other properties, e.g. the bq25892 can do "quick-charge" negotiation by pulsing its current draw, but this should only be done if the usb_type psy-property of its supplier is set to DCP (and device-properties indicate the board allows higher voltages). Instead of adding extra helper functions for each property which a psy-driver wants to query from its supplier, refactor power_supply_set_input_current_limit_from_supplier() into a more generic power_supply_get_property_from_supplier() function. Reviewed-by: Andy Shevchenko Signed-off-by: Hans de Goede Signed-off-by: Sebastian Reichel Stable-dep-of: 77c2a3097d70 ("power: supply: bq24190: Call power_supply_changed() after updating input current") Signed-off-by: Sasha Levin

power: supply: bq27xxx: Ensure power_supply_changed() is called on current sign changes

2023-06-05T07:07:02+00:00

[ Upstream commit 939a116142012926e25de0ea6b7e2f8d86a5f1b6 ] On gauges where the current register is signed, there is no charging flag in the flags register. So only checking flags will not result in power_supply_changed() getting called when e.g. a charger is plugged in and the current sign changes from negative (discharging) to positive (charging). This causes userspace's notion of the status to lag until userspace does a poll. And when a power_supply_leds.c LED trigger is used to indicate charging status with a LED, this LED will lag until the capacity percentage changes, which may take many minutes (because the LED trigger only is updated on power_supply_changed() calls). Fix this by calling bq27xxx_battery_current_and_status() on gauges with a signed current register and checking if the status has changed. Fixes: 297a533b3e62 ("bq27x00: Cache battery registers") Signed-off-by: Hans de Goede Signed-off-by: Sebastian Reichel Signed-off-by: Sasha Levin

fs: fix undefined behavior in bit shift for SB_NOUSER

2023-05-30T11:57:58+00:00

commit f15afbd34d8fadbd375f1212e97837e32bc170cc upstream. Shifting signed 32-bit value by 31 bits is undefined, so changing significant bit to unsigned. It was spotted by UBSAN. So let's just fix this by using the BIT() helper for all SB_* flags. Fixes: e462ec50cb5f ("VFS: Differentiate mount flags (MS_*) from internal superblock flags") Signed-off-by: Hao Ge Message-Id: <20230424051835.374204-1-gehao@kylinos.cn> [brauner@kernel.org: use BIT() for all SB_* flags] Signed-off-by: Christian Brauner Signed-off-by: Greg Kroah-Hartman

power: supply: bq27xxx: Fix poll_interval handling and races on remove

2023-05-30T11:57:58+00:00

commit c00bc80462afc7963f449d7f21d896d2f629cacc upstream. Before this patch bq27xxx_battery_teardown() was setting poll_interval = 0 to avoid bq27xxx_battery_update() requeuing the delayed_work item. There are 2 problems with this: 1. If the driver is unbound through sysfs, rather then the module being rmmod-ed, this changes poll_interval unexpectedly 2. This is racy, after it being set poll_interval could be changed before bq27xxx_battery_update() checks it through /sys/module/bq27xxx_battery/parameters/poll_interval Fix this by added a removed attribute to struct bq27xxx_device_info and using that instead of setting poll_interval to 0. There also is another poll_interval related race on remove(), writing /sys/module/bq27xxx_battery/parameters/poll_interval will requeue the delayed_work item for all devices on the bq27xxx_battery_devices list and the device being removed was only removed from that list after cancelling the delayed_work item. Fix this by moving the removal from the bq27xxx_battery_devices list to before cancelling the delayed_work item. Fixes: 8cfaaa811894 ("bq27x00_battery: Fix OOPS caused by unregistring bq27x00 driver") Signed-off-by: Hans de Goede Signed-off-by: Sebastian Reichel Signed-off-by: Greg Kroah-Hartman

USB: core: Add routines for endpoint checks in old drivers

2023-05-30T11:57:57+00:00

commit 13890626501ffda22b18213ddaf7930473da5792 upstream. Many of the older USB drivers in the Linux USB stack were written based simply on a vendor's device specification. They use the endpoint information in the spec and assume these endpoints will always be present, with the properties listed, in any device matching the given vendor and product IDs. While that may have been true back then, with spoofing and fuzzing it is not true any more. More and more we are finding that those old drivers need to perform at least a minimum of checking before they try to use any endpoint other than ep0. To make this checking as simple as possible, we now add a couple of utility routines to the USB core. usb_check_bulk_endpoints() and usb_check_int_endpoints() take an interface pointer together with a list of endpoint addresses (numbers and directions). They check that the interface's current alternate setting includes endpoints with those addresses and that each of these endpoints has the right type: bulk or interrupt, respectively. Although we already have usb_find_common_endpoints() and related routines meant for a similar purpose, they are not well suited for this kind of checking. Those routines find endpoints of various kinds, but only one (either the first or the last) of each kind, and they don't verify that the endpoints' addresses agree with what the caller expects. In theory the new routines could be more general: They could take a particular altsetting as their argument instead of always using the interface's current altsetting. In practice I think this won't matter too much; multiple altsettings tend to be used for transferring media (audio or visual) over isochronous endpoints, not bulk or interrupt. Drivers for such devices will generally require more sophisticated checking than these simplistic routines provide. Signed-off-by: Alan Stern Link: https://lore.kernel.org/r/dd2c8e8c-2c87-44ea-ba17-c64b97e201c9@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman