kernel/linux.git/include/linux, branch v5.10.133

objtool: Re-add UNWIND_HINT_{SAVE_RESTORE}

2022-07-25T09:26:47+00:00

commit 8faea26e611189e933ea2281975ff4dc7c1106b6 upstream. Commit c536ed2fffd5 ("objtool: Remove SAVE/RESTORE hints") removed the save/restore unwind hints because they were no longer needed. Now they're going to be needed again so re-add them. Signed-off-by: Josh Poimboeuf Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Borislav Petkov Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

objtool: Add entry UNRET validation

2022-07-25T09:26:45+00:00

commit a09a6e2399ba0595c3042b3164f3ca68a3cff33e upstream. Since entry asm is tricky, add a validation pass that ensures the retbleed mitigation has been done before the first actual RET instruction. Entry points are those that either have UNWIND_HINT_ENTRY, which acts as UNWIND_HINT_EMPTY but marks the instruction as an entry point, or those that have UWIND_HINT_IRET_REGS at +0. This is basically a variant of validate_branch() that is intra-function and it will simply follow all branches from marked entry points and ensures that all paths lead to ANNOTATE_UNRET_END. If a path hits RET or an indirection the path is a fail and will be reported. There are 3 ANNOTATE_UNRET_END instances: - UNTRAIN_RET itself - exception from-kernel; this path doesn't need UNTRAIN_RET - all early exceptions; these also don't need UNTRAIN_RET Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Borislav Petkov Reviewed-by: Josh Poimboeuf Signed-off-by: Borislav Petkov [cascardo: arch/x86/entry/entry_64.S no pt_regs return at .Lerror_entry_done_lfence] [cascardo: tools/objtool/builtin-check.c no link option validation] [cascardo: tools/objtool/check.c opts.ibt is ibt] [cascardo: tools/objtool/include/objtool/builtin.h leave unret option as bool, no struct opts] [cascardo: objtool is still called from scripts/link-vmlinux.sh] [cascardo: no IBT support] Signed-off-by: Thadeu Lima de Souza Cascardo [bwh: Backported to 5.10: - In scripts/link-vmlinux.sh, use "test -n" instead of is_enabled - Adjust context] Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

x86/bugs: Report AMD retbleed vulnerability

2022-07-25T09:26:40+00:00

commit 6b80b59b3555706508008f1f127b5412c89c7fd8 upstream. Report that AMD x86 CPUs are vulnerable to the RETBleed (Arbitrary Speculative Code Execution with Return Instructions) attack. [peterz: add hygon] [kim: invert parity; fam15h] Co-developed-by: Kim Phillips Signed-off-by: Kim Phillips Signed-off-by: Alexandre Chartre Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Borislav Petkov Reviewed-by: Josh Poimboeuf Signed-off-by: Borislav Petkov Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

x86/kvm/vmx: Make noinstr clean

2022-07-25T09:26:34+00:00

commit 742ab6df974ae8384a2dd213db1a3a06cf6d8936 upstream. The recent mmio_stale_data fixes broke the noinstr constraints: vmlinux.o: warning: objtool: vmx_vcpu_enter_exit+0x15b: call to wrmsrl.constprop.0() leaves .noinstr.text section vmlinux.o: warning: objtool: vmx_vcpu_enter_exit+0x1bf: call to kvm_arch_has_assigned_device() leaves .noinstr.text section make it all happy again. Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Borislav Petkov Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

objtool: Combine UNWIND_HINT_RET_OFFSET and UNWIND_HINT_FUNC

2022-07-25T09:26:07+00:00

commit b735bd3e68824316655252a931a3353a6ebc036f upstream. The ORC metadata generated for UNWIND_HINT_FUNC isn't actually very func-like. With certain usages it can cause stack state mismatches because it doesn't set the return address (CFI_RA). Also, users of UNWIND_HINT_RET_OFFSET no longer need to set a custom return stack offset. Instead they just need to specify a func-like situation, so the current ret_offset code is hacky for no good reason. Solve both problems by simplifying the RET_OFFSET handling and converting it into a more useful UNWIND_HINT_FUNC. If we end up needing the old 'ret_offset' functionality again in the future, we should be able to support it pretty easily with the addition of a custom 'sp_offset' in UNWIND_HINT_FUNC. Signed-off-by: Josh Poimboeuf Link: https://lore.kernel.org/r/db9d1f5d79dddfbb3725ef6d8ec3477ad199948d.1611263462.git.jpoimboe@redhat.com [bwh: Backported to 5.10: - Don't use bswap_if_needed() since we don't have any of the other fixes for mixed-endian cross-compilation - Adjust context] Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

serial: 8250: Fix PM usage_count for console handover

2022-07-21T19:20:19+00:00

commit f9b11229b79c0fb2100b5bb4628a101b1d37fbf6 upstream. When console is enabled, univ8250_console_setup() calls serial8250_console_setup() before .dev is set to uart_port. Therefore, it will not call pm_runtime_get_sync(). Later, when the actual driver is going to take over univ8250_console_exit() is called. As .dev is already set, serial8250_console_exit() makes pm_runtime_put_sync() call with usage count being zero triggering PM usage count warning (extra debug for univ8250_console_setup(), univ8250_console_exit(), and serial8250_register_ports()): [ 0.068987] univ8250_console_setup ttyS0 nodev [ 0.499670] printk: console [ttyS0] enabled [ 0.717955] printk: console [ttyS0] printing thread started [ 1.960163] serial8250_register_ports assigned dev for ttyS0 [ 1.976830] printk: console [ttyS0] disabled [ 1.976888] printk: console [ttyS0] printing thread stopped [ 1.977073] univ8250_console_exit ttyS0 usage:0 [ 1.977075] serial8250 serial8250: Runtime PM usage count underflow! [ 1.977429] dw-apb-uart.6: ttyS0 at MMIO 0x4010006000 (irq = 33, base_baud = 115200) is a 16550A [ 1.977812] univ8250_console_setup ttyS0 usage:2 [ 1.978167] printk: console [ttyS0] printing thread started [ 1.978203] printk: console [ttyS0] enabled To fix the issue, call pm_runtime_get_sync() in serial8250_register_ports() as soon as .dev is set for an uart_port if it has console enabled. This problem became apparent only recently because 82586a721595 ("PM: runtime: Avoid device usage count underflows") added the warning printout. I confirmed this problem also occurs with v5.18 (w/o the warning printout, obviously). Fixes: bedb404e91bb ("serial: 8250_port: Don't use power management for kernel console") Cc: stable Tested-by: Tony Lindgren Reviewed-by: Andy Shevchenko Reviewed-by: Tony Lindgren Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/b4f428e9-491f-daf2-2232-819928dc276e@linux.intel.com Signed-off-by: Greg Kroah-Hartman

ima: force signature verification when CONFIG_KEXEC_SIG is configured

2022-07-21T19:20:11+00:00

[ Upstream commit af16df54b89dee72df253abc5e7b5e8a6d16c11c ] Currently, an unsigned kernel could be kexec'ed when IMA arch specific policy is configured unless lockdown is enabled. Enforce kernel signature verification check in the kexec_file_load syscall when IMA arch specific policy is configured. Fixes: 99d5cadfde2b ("kexec_file: split KEXEC_VERIFY_SIG into KEXEC_SIG and KEXEC_SIG_FORCE") Reported-and-suggested-by: Mimi Zohar Signed-off-by: Coiby Xu Signed-off-by: Mimi Zohar Signed-off-by: Sasha Levin

cgroup: Use separate src/dst nodes when preloading css_sets for migration

2022-07-21T19:20:00+00:00

commit 07fd5b6cdf3cc30bfde8fe0f644771688be04447 upstream. Each cset (css_set) is pinned by its tasks. When we're moving tasks around across csets for a migration, we need to hold the source and destination csets to ensure that they don't go away while we're moving tasks about. This is done by linking cset->mg_preload_node on either the mgctx->preloaded_src_csets or mgctx->preloaded_dst_csets list. Using the same cset->mg_preload_node for both the src and dst lists was deemed okay as a cset can't be both the source and destination at the same time. Unfortunately, this overloading becomes problematic when multiple tasks are involved in a migration and some of them are identity noop migrations while others are actually moving across cgroups. For example, this can happen with the following sequence on cgroup1: #1> mkdir -p /sys/fs/cgroup/misc/a/b #2> echo $$ > /sys/fs/cgroup/misc/a/cgroup.procs #3> RUN_A_COMMAND_WHICH_CREATES_MULTIPLE_THREADS & #4> PID=$! #5> echo $PID > /sys/fs/cgroup/misc/a/b/tasks #6> echo $PID > /sys/fs/cgroup/misc/a/cgroup.procs the process including the group leader back into a. In this final migration, non-leader threads would be doing identity migration while the group leader is doing an actual one. After #3, let's say the whole process was in cset A, and that after #4, the leader moves to cset B. Then, during #6, the following happens: 1. cgroup_migrate_add_src() is called on B for the leader. 2. cgroup_migrate_add_src() is called on A for the other threads. 3. cgroup_migrate_prepare_dst() is called. It scans the src list. 4. It notices that B wants to migrate to A, so it tries to A to the dst list but realizes that its ->mg_preload_node is already busy. 5. and then it notices A wants to migrate to A as it's an identity migration, it culls it by list_del_init()'ing its ->mg_preload_node and putting references accordingly. 6. The rest of migration takes place with B on the src list but nothing on the dst list. This means that A isn't held while migration is in progress. If all tasks leave A before the migration finishes and the incoming task pins it, the cset will be destroyed leading to use-after-free. This is caused by overloading cset->mg_preload_node for both src and dst preload lists. We wanted to exclude the cset from the src list but ended up inadvertently excluding it from the dst list too. This patch fixes the issue by separating out cset->mg_preload_node into ->mg_src_preload_node and ->mg_dst_preload_node, so that the src and dst preloadings don't interfere with each other. Signed-off-by: Tejun Heo Reported-by: Mukesh Ojha Reported-by: shisiyuan Link: http://lkml.kernel.org/r/1654187688-27411-1-git-send-email-shisiyuan@xiaomi.com Link: https://www.spinics.net/lists/cgroups/msg33313.html Fixes: f817de98513d ("cgroup: prepare migration path for unified hierarchy") Cc: stable@vger.kernel.org # v3.16+ Signed-off-by: Greg Kroah-Hartman

fix race between exit_itimers() and /proc/pid/timers

2022-07-21T19:19:59+00:00

commit d5b36a4dbd06c5e8e36ca8ccc552f679069e2946 upstream. As Chris explains, the comment above exit_itimers() is not correct, we can race with proc_timers_seq_ops. Change exit_itimers() to clear signal->posix_timers with ->siglock held. Cc: Reported-by: chris@accessvector.net Signed-off-by: Oleg Nesterov Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

misc: rtsx_usb: use separate command and response buffers

2022-07-12T14:32:22+00:00

commit 3776c78559853fd151be7c41e369fd076fb679d5 upstream. rtsx_usb uses same buffer for command and response. There could be a potential conflict using the same buffer for both especially if retries and timeouts are involved. Use separate command and response buffers to avoid conflicts. Signed-off-by: Shuah Khan Cc: stable Link: https://lore.kernel.org/r/07e3721804ff07aaab9ef5b39a5691d0718b9ade.1656642167.git.skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman