kernel/linux.git/include/linux, branch v4.19.237

net: handle ARPHRD_PIMREG in dev_is_mac_header_xmit()

2022-03-23T08:10:44+00:00

[ Upstream commit 4ee06de7729d795773145692e246a06448b1eb7a ] This kind of interface doesn't have a mac header. This patch fixes bpf_redirect() to a PIM interface. Fixes: 27b29f63058d ("bpf: add bpf_redirect() helper") Signed-off-by: Nicolas Dichtel Link: https://lore.kernel.org/r/20220315092008.31423-1-nicolas.dichtel@6wind.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

arm64: entry: Add vectors that have the bhb mitigation sequences

2022-03-23T08:10:43+00:00

commit ba2689234be92024e5635d30fe744f4853ad97db upstream. Some CPUs affected by Spectre-BHB need a sequence of branches, or a firmware call to be run before any indirect branch. This needs to go in the vectors. No CPU needs both. While this can be patched in, it would run on all CPUs as there is a single set of vectors. If only one part of a big/little combination is affected, the unaffected CPUs have to run the mitigation too. Create extra vectors that include the sequence. Subsequent patches will allow affected CPUs to select this set of vectors. Later patches will modify the loop count to match what the CPU requires. Reviewed-by: Catalin Marinas Signed-off-by: James Morse Signed-off-by: Greg Kroah-Hartman

sched/topology: Make sched_init_numa() use a set for the deduplicating sort

2022-03-23T08:10:41+00:00

commit 620a6dc40754dc218f5b6389b5d335e9a107fd29 upstream. The deduplicating sort in sched_init_numa() assumes that the first line in the distance table contains all unique values in the entire table. I've been trying to pen what this exactly means for the topology, but it's not straightforward. For instance, topology.c uses this example: node 0 1 2 3 0: 10 20 20 30 1: 20 10 20 20 2: 20 20 10 20 3: 30 20 20 10 0 ----- 1 | / | | / | | / | 2 ----- 3 Which works out just fine. However, if we swap nodes 0 and 1: 1 ----- 0 | / | | / | | / | 2 ----- 3 we get this distance table: node 0 1 2 3 0: 10 20 20 20 1: 20 10 20 30 2: 20 20 10 20 3: 20 30 20 10 Which breaks the deduplicating sort (non-representative first line). In this case this would just be a renumbering exercise, but it so happens that we can have a deduplicating sort that goes through the whole table in O(n²) at the extra cost of a temporary memory allocation (i.e. any form of set). The ACPI spec (SLIT) mentions distances are encoded on 8 bits. Following this, implement the set as a 256-bits bitmap. Should this not be satisfactory (i.e. we want to support 32-bit values), then we'll have to go for some other sparse set implementation. This has the added benefit of letting us allocate just the right amount of memory for sched_domains_numa_distance[], rather than an arbitrary (nr_node_ids + 1). Note: DT binding equivalent (distance-map) decodes distances as 32-bit values. Signed-off-by: Valentin Schneider Signed-off-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/20210122123943.1217-2-valentin.schneider@arm.com Signed-off-by: dann frazier Signed-off-by: Greg Kroah-Hartman

virtio: acknowledge all features before access

2022-03-16T12:20:27+00:00

commit 4fa59ede95195f267101a1b8916992cf3f245cdb upstream. The feature negotiation was designed in a way that makes it possible for devices to know which config fields will be accessed by drivers. This is broken since commit 404123c2db79 ("virtio: allow drivers to validate features") with fallout in at least block and net. We have a partial work-around in commit 2f9a174f918e ("virtio: write back F_VERSION_1 before validate") which at least lets devices find out which format should config space have, but this is a partial fix: guests should not access config space without acknowledging features since otherwise we'll never be able to change the config space format. To fix, split finalize_features from virtio_finalize_features and call finalize_features with all feature bits before validation, and then - if validation changed any bits - once again after. Since virtio_finalize_features no longer writes out features rename it to virtio_features_ok - since that is what it does: checks that features are ok with the device. As a side effect, this also reduces the amount of hypervisor accesses - we now only acknowledge features once unless we are clearing any features when validating (which is uncommon). IRC I think that this was more or less always the intent in the spec but unfortunately the way the spec is worded does not say this explicitly, I plan to address this at the spec level, too. Acked-by: Jason Wang Cc: stable@vger.kernel.org Fixes: 404123c2db79 ("virtio: allow drivers to validate features") Fixes: 2f9a174f918e ("virtio: write back F_VERSION_1 before validate") Cc: "Halil Pasic" Signed-off-by: Michael S. Tsirkin Signed-off-by: Greg Kroah-Hartman

virtio: unexport virtio_finalize_features

2022-03-16T12:20:27+00:00

commit 838d6d3461db0fdbf33fc5f8a69c27b50b4a46da upstream. virtio_finalize_features is only used internally within virtio. No reason to export it. Signed-off-by: Michael S. Tsirkin Reviewed-by: Cornelia Huck Acked-by: Jason Wang Signed-off-by: Greg Kroah-Hartman

net/mlx5: Fix size field in bufferx_reg struct

2022-03-16T12:20:26+00:00

[ Upstream commit ac77998b7ac3044f0509b097da9637184598980d ] According to HW spec the field "size" should be 16 bits in bufferx register. Fixes: e281682bf294 ("net/mlx5_core: HW data structs/types definitions cleanup") Signed-off-by: Mohammad Kabat Reviewed-by: Moshe Shemesh Signed-off-by: Saeed Mahameed Signed-off-by: Sasha Levin

arm/arm64: smccc/psci: add arm_smccc_1_1_get_conduit()

2022-03-11T09:15:11+00:00

commit 6b7fe77c334ae59fed9500140e08f4f896b36871 upstream. SMCCC callers are currently amassing a collection of enums for the SMCCC conduit, and are having to dig into the PSCI driver's internals in order to figure out what to do. Let's clean this up, with common SMCCC_CONDUIT_* definitions, and an arm_smccc_1_1_get_conduit() helper that abstracts the PSCI driver's internal state. We can kill off the PSCI_CONDUIT_* definitions once we've migrated users over to the new interface. Signed-off-by: Mark Rutland Acked-by: Lorenzo Pieralisi Acked-by: Will Deacon Signed-off-by: Catalin Marinas Signed-off-by: Greg Kroah-Hartman

arm/arm64: Provide a wrapper for SMCCC 1.1 calls

2022-03-11T09:15:11+00:00

commit 541625ac47ce9d0835efaee0fcbaa251b0000a37 upstream. SMCCC 1.1 calls may use either HVC or SMC depending on the PSCI conduit. Rather than coding this in every call site, provide a macro which uses the correct instruction. The macro also handles the case where no conduit is configured/available returning a not supported error in res, along with returning the conduit used for the call. This allow us to remove some duplicated code and will be useful later when adding paravirtualized time hypervisor calls. Signed-off-by: Steven Price Acked-by: Will Deacon Signed-off-by: Marc Zyngier Signed-off-by: Greg Kroah-Hartman

x86/speculation: Include unprivileged eBPF status in Spectre v2 mitigation reporting

2022-03-11T09:15:11+00:00

commit 44a3918c8245ab10c6c9719dd12e7a8d291980d8 upstream. With unprivileged eBPF enabled, eIBRS (without retpoline) is vulnerable to Spectre v2 BHB-based attacks. When both are enabled, print a warning message and report it in the 'spectre_v2' sysfs vulnerabilities file. Signed-off-by: Josh Poimboeuf Signed-off-by: Borislav Petkov Reviewed-by: Thomas Gleixner [fllinden@amazon.com: backported to 4.19] Signed-off-by: Frank van der Linden Signed-off-by: Greg Kroah-Hartman

Revert "module, async: async_synchronize_full() on module init iff async is used"

2022-02-23T10:58:38+00:00

[ Upstream commit 67d6212afda218d564890d1674bab28e8612170f ] This reverts commit 774a1221e862b343388347bac9b318767336b20b. We need to finish all async code before the module init sequence is done. In the reverted commit the PF_USED_ASYNC flag was added to mark a thread that called async_schedule(). Then the PF_USED_ASYNC flag was used to determine whether or not async_synchronize_full() needs to be invoked. This works when modprobe thread is calling async_schedule(), but it does not work if module dispatches init code to a worker thread which then calls async_schedule(). For example, PCI driver probing is invoked from a worker thread based on a node where device is attached: if (cpu < nr_cpu_ids) error = work_on_cpu(cpu, local_pci_probe, &ddi); else error = local_pci_probe(&ddi); We end up in a situation where a worker thread gets the PF_USED_ASYNC flag set instead of the modprobe thread. As a result, async_synchronize_full() is not invoked and modprobe completes without waiting for the async code to finish. The issue was discovered while loading the pm80xx driver: (scsi_mod.scan=async) modprobe pm80xx worker ... do_init_module() ... pci_call_probe() work_on_cpu(local_pci_probe) local_pci_probe() pm8001_pci_probe() scsi_scan_host() async_schedule() worker->flags |= PF_USED_ASYNC; ... < return from worker > ... if (current->flags & PF_USED_ASYNC) <--- false async_synchronize_full(); Commit 21c3c5d28007 ("block: don't request module during elevator init") fixed the deadlock issue which the reverted commit 774a1221e862 ("module, async: async_synchronize_full() on module init iff async is used") tried to fix. Since commit 0fdff3ec6d87 ("async, kmod: warn on synchronous request_module() from async workers") synchronous module loading from async is not allowed. Given that the original deadlock issue is fixed and it is no longer allowed to call synchronous request_module() from async we can remove PF_USED_ASYNC flag to make module init consistently invoke async_synchronize_full() unless async module probe is requested. Signed-off-by: Igor Pylypiv Reviewed-by: Changyuan Lyu Reviewed-by: Luis Chamberlain Acked-by: Tejun Heo Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin