kernel/linux.git/include/linux, branch v4.14.66

cpu/hotplug: Fix SMT supported evaluation

2018-08-15T16:13:00+00:00

commit bc2d8d262cba5736332cbc866acb11b1c5748aa9 upstream Josh reported that the late SMT evaluation in cpu_smt_state_init() sets cpu_smt_control to CPU_SMT_NOT_SUPPORTED in case that 'nosmt' was supplied on the kernel command line as it cannot differentiate between SMT disabled by BIOS and SMT soft disable via 'nosmt'. That wreckages the state and makes the sysfs interface unusable. Rework this so that during bringup of the non boot CPUs the availability of SMT is determined in cpu_smt_allowed(). If a newly booted CPU is not a 'primary' thread then set the local cpu_smt_available marker and evaluate this explicitely right after the initial SMP bringup has finished. SMT evaulation on x86 is a trainwreck as the firmware has all the information _before_ booting the kernel, but there is no interface to query it. Fixes: 73d5e2b47264 ("cpu/hotplug: detect SMT disabled by BIOS") Reported-by: Josh Poimboeuf Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

cpu/hotplug: Set CPU_SMT_NOT_SUPPORTED early

2018-08-15T16:12:56+00:00

commit fee0aede6f4739c87179eca76136f83210953b86 upstream The CPU_SMT_NOT_SUPPORTED state is set (if the processor does not support SMT) when the sysfs SMT control file is initialized. That was fine so far as this was only required to make the output of the control file correct and to prevent writes in that case. With the upcoming l1tf command line parameter, this needs to be set up before the L1TF mitigation selection and command line parsing happens. Signed-off-by: Thomas Gleixner Tested-by: Jiri Kosina Reviewed-by: Greg Kroah-Hartman Reviewed-by: Josh Poimboeuf Link: https://lkml.kernel.org/r/20180713142323.121795971@linutronix.de Signed-off-by: Greg Kroah-Hartman

cpu/hotplug: Expose SMT control init function

2018-08-15T16:12:56+00:00

commit 8e1b706b6e819bed215c0db16345568864660393 upstream The L1TF mitigation will gain a commend line parameter which allows to set a combination of hypervisor mitigation and SMT control. Expose cpu_smt_disable() so the command line parser can tweak SMT settings. [ tglx: Split out of larger patch and made it preserve an already existing force off state ] Signed-off-by: Jiri Kosina Signed-off-by: Thomas Gleixner Tested-by: Jiri Kosina Reviewed-by: Greg Kroah-Hartman Reviewed-by: Josh Poimboeuf Link: https://lkml.kernel.org/r/20180713142323.039715135@linutronix.de Signed-off-by: Greg Kroah-Hartman

cpu/hotplug: Provide knobs to control SMT

2018-08-15T16:12:52+00:00

commit 05736e4ac13c08a4a9b1ef2de26dd31a32cbee57 upstream Provide a command line and a sysfs knob to control SMT. The command line options are: 'nosmt': Enumerate secondary threads, but do not online them 'nosmt=force': Ignore secondary threads completely during enumeration via MP table and ACPI/MADT. The sysfs control file has the following states (read/write): 'on': SMT is enabled. Secondary threads can be freely onlined 'off': SMT is disabled. Secondary threads, even if enumerated cannot be onlined 'forceoff': SMT is permanentely disabled. Writes to the control file are rejected. 'notsupported': SMT is not supported by the CPU The command line option 'nosmt' sets the sysfs control to 'off'. This can be changed to 'on' to reenable SMT during runtime. The command line option 'nosmt=force' sets the sysfs control to 'forceoff'. This cannot be changed during runtime. When SMT is 'on' and the control file is changed to 'off' then all online secondary threads are offlined and attempts to online a secondary thread later on are rejected. When SMT is 'off' and the control file is changed to 'on' then secondary threads can be onlined again. The 'off' -> 'on' transition does not automatically online the secondary threads. When the control file is set to 'forceoff', the behaviour is the same as setting it to 'off', but the operation is irreversible and later writes to the control file are rejected. When the control status is 'notsupported' then writes to the control file are rejected. Signed-off-by: Thomas Gleixner Reviewed-by: Konrad Rzeszutek Wilk Acked-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman

x86/speculation/l1tf: Limit swap file size to MAX_PA/2

2018-08-15T16:12:51+00:00

commit 377eeaa8e11fe815b1d07c81c4a0e2843a8c15eb upstream For the L1TF workaround its necessary to limit the swap file size to below MAX_PA/2, so that the higher bits of the swap offset inverted never point to valid memory. Add a mechanism for the architecture to override the swap file size check in swapfile.c and add a x86 specific max swapfile check function that enforces that limit. The check is only enabled if the CPU is vulnerable to L1TF. In VMs with 42bit MAX_PA the typical limit is 2TB now, on a native system with 46bit PA it is 32TB. The limit is only per individual swap file, so it's always possible to exceed these limits with multiple swap files or partitions. Signed-off-by: Andi Kleen Signed-off-by: Thomas Gleixner Reviewed-by: Josh Poimboeuf Acked-by: Michal Hocko Acked-by: Dave Hansen Signed-off-by: Greg Kroah-Hartman

x86/speculation/l1tf: Add sysfs reporting for l1tf

2018-08-15T16:12:50+00:00

commit 17dbca119312b4e8173d4e25ff64262119fcef38 upstream L1TF core kernel workarounds are cheap and normally always enabled, However they still should be reported in sysfs if the system is vulnerable or mitigated. Add the necessary CPU feature/bug bits. - Extend the existing checks for Meltdowns to determine if the system is vulnerable. All CPUs which are not vulnerable to Meltdown are also not vulnerable to L1TF - Check for 32bit non PAE and emit a warning as there is no practical way for mitigation due to the limited physical address bits - If the system has more than MAX_PA/2 physical memory the invert page workarounds don't protect the system against the L1TF attack anymore, because an inverted physical address will also point to valid memory. Print a warning in this case and report that the system is vulnerable. Add a function which returns the PFN limit for the L1TF mitigation, which will be used in follow up patches for sanity and range checks. [ tglx: Renamed the CPU feature bit to L1TF_PTEINV ] Signed-off-by: Andi Kleen Signed-off-by: Thomas Gleixner Reviewed-by: Josh Poimboeuf Acked-by: Dave Hansen Signed-off-by: Greg Kroah-Hartman

init: rename and re-order boot_cpu_state_init()

2018-08-15T16:12:48+00:00

commit b5b1404d0815894de0690de8a1ab58269e56eae6 upstream. This is purely a preparatory patch for upcoming changes during the 4.19 merge window. We have a function called "boot_cpu_state_init()" that isn't really about the bootup cpu state: that is done much earlier by the similarly named "boot_cpu_init()" (note lack of "state" in name). This function initializes some hotplug CPU state, and needs to run after the percpu data has been properly initialized. It even has a comment to that effect. Except it _doesn't_ actually run after the percpu data has been properly initialized. On x86 it happens to do that, but on at least arm and arm64, the percpu base pointers are initialized by the arch-specific 'smp_prepare_boot_cpu()' hook, which ran _after_ boot_cpu_state_init(). This had some unexpected results, and in particular we have a patch pending for the merge window that did the obvious cleanup of using 'this_cpu_write()' in the cpu hotplug init code: - per_cpu_ptr(&cpuhp_state, smp_processor_id())->state = CPUHP_ONLINE; + this_cpu_write(cpuhp_state.state, CPUHP_ONLINE); which is obviously the right thing to do. Except because of the ordering issue, it actually failed miserably and unexpectedly on arm64. So this just fixes the ordering, and changes the name of the function to be 'boot_cpu_hotplug_init()' to make it obvious that it's about cpu hotplug state, because the core CPU state was supposed to have already been done earlier. Marked for stable, since the (not yet merged) patch that will show this problem is marked for stable. Reported-by: Vlastimil Babka Reported-by: Mian Yousaf Kaukab Suggested-by: Catalin Marinas Acked-by: Thomas Gleixner Cc: Will Deacon Cc: stable@kernel.org Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

kasan: add no_sanitize attribute for clang builds

2018-08-15T16:12:47+00:00

commit 12c8f25a016dff69ee284aa3338bebfd2cfcba33 upstream. KASAN uses the __no_sanitize_address macro to disable instrumentation of particular functions. Right now it's defined only for GCC build, which causes false positives when clang is used. This patch adds a definition for clang. Note, that clang's revision 329612 or higher is required. [andreyknvl@google.com: remove redundant #ifdef CONFIG_KASAN check] Link: http://lkml.kernel.org/r/c79aa31a2a2790f6131ed607c58b0dd45dd62a6c.1523967959.git.andreyknvl@google.com Link: http://lkml.kernel.org/r/4ad725cc903f8534f8c8a60f0daade5e3d674f8d.1523554166.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov Acked-by: Andrey Ryabinin Cc: Alexander Potapenko Cc: Dmitry Vyukov Cc: David Rientjes Cc: Thomas Gleixner Cc: Ingo Molnar Cc: David Woodhouse Cc: Andrey Konovalov Cc: Will Deacon Cc: Greg Kroah-Hartman Cc: Paul Lawrence Cc: Sandipan Das Cc: Kees Cook Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Cc: Sodagudi Prasad Signed-off-by: Greg Kroah-Hartman

ring_buffer: tracing: Inherit the tracing setting to next ring buffer

2018-08-09T10:16:38+00:00

commit 73c8d8945505acdcbae137c2e00a1232e0be709f upstream. Maintain the tracing on/off setting of the ring_buffer when switching to the trace buffer snapshot. Taking a snapshot is done by swapping the backup ring buffer (max_tr_buffer). But since the tracing on/off setting is defined by the ring buffer, when swapping it, the tracing on/off setting can also be changed. This causes a strange result like below: /sys/kernel/debug/tracing # cat tracing_on 1 /sys/kernel/debug/tracing # echo 0 > tracing_on /sys/kernel/debug/tracing # cat tracing_on 0 /sys/kernel/debug/tracing # echo 1 > snapshot /sys/kernel/debug/tracing # cat tracing_on 1 /sys/kernel/debug/tracing # echo 1 > snapshot /sys/kernel/debug/tracing # cat tracing_on 0 We don't touch tracing_on, but snapshot changes tracing_on setting each time. This is an anomaly, because user doesn't know that each "ring_buffer" stores its own tracing-enable state and the snapshot is done by swapping ring buffers. Link: http://lkml.kernel.org/r/153149929558.11274.11730609978254724394.stgit@devbox Cc: Ingo Molnar Cc: Shuah Khan Cc: Tom Zanussi Cc: Hiraku Toyooka Cc: stable@vger.kernel.org Fixes: debdd57f5145 ("tracing: Make a snapshot feature available from userspace") Signed-off-by: Masami Hiramatsu [ Updated commit log and comment in the code ] Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

regulator: Don't return or expect -errno from of_map_mode()

2018-08-03T05:50:40+00:00

[ Upstream commit 02f3703934a42417021405ef336fe45add13c3d1 ] In of_get_regulation_constraints() we were taking the result of of_map_mode() (an unsigned int) and assigning it to an int. We were then checking whether this value was -EINVAL. Some implementers of of_map_mode() were returning -EINVAL (even though the return type of their function needed to be unsigned int) because they needed to signal an error back to of_get_regulation_constraints(). In general in the regulator framework the mode is always referred to as an unsigned int. While we could fix this to be a signed int (the highest value we store in there right now is 0x8), it's actually pretty clean to just define the regulator mode 0x0 (the lack of any bits set) as an invalid mode. Let's do that. Fixes: 5e5e3a42c653 ("regulator: of: Add support for parsing initial and suspend modes") Suggested-by: Javier Martinez Canillas Signed-off-by: Douglas Anderson Reviewed-by: Javier Martinez Canillas Signed-off-by: Mark Brown Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman