kernel/linux.git/include/linux, branch v4.14.317

cdc_ncm: Implement the 32-bit version of NCM Transfer Block

2023-06-09T08:22:55+00:00

commit 0fa81b304a7973a499f844176ca031109487dd31 upstream. The NCM specification defines two formats of transfer blocks: with 16-bit fields (NTB-16) and with 32-bit fields (NTB-32). Currently only NTB-16 is implemented. This patch adds the support of NTB-32. The motivation behind this is that some devices such as E5785 or E5885 from the current generation of Huawei LTE routers do not support NTB-16. The previous generations of Huawei devices are also use NTB-32 by default. Also this patch enables NTB-32 by default for Huawei devices. During the 2019 ValdikSS made five attempts to contact Huawei to add the NTB-16 support to their router firmware, but they were unsuccessful. Signed-off-by: Alexander Bersenev Signed-off-by: David S. Miller Stable-dep-of: 7e01c7f7046e ("net: cdc_ncm: Deal with too low values of dwNtbOutMaxSize") Signed-off-by: Tudor Ambarus Signed-off-by: Greg Kroah-Hartman

power: supply: bq27xxx: Fix poll_interval handling and races on remove

2023-05-30T11:38:38+00:00

commit c00bc80462afc7963f449d7f21d896d2f629cacc upstream. Before this patch bq27xxx_battery_teardown() was setting poll_interval = 0 to avoid bq27xxx_battery_update() requeuing the delayed_work item. There are 2 problems with this: 1. If the driver is unbound through sysfs, rather then the module being rmmod-ed, this changes poll_interval unexpectedly 2. This is racy, after it being set poll_interval could be changed before bq27xxx_battery_update() checks it through /sys/module/bq27xxx_battery/parameters/poll_interval Fix this by added a removed attribute to struct bq27xxx_device_info and using that instead of setting poll_interval to 0. There also is another poll_interval related race on remove(), writing /sys/module/bq27xxx_battery/parameters/poll_interval will requeue the delayed_work item for all devices on the bq27xxx_battery_devices list and the device being removed was only removed from that list after cancelling the delayed_work item. Fix this by moving the removal from the bq27xxx_battery_devices list to before cancelling the delayed_work item. Fixes: 8cfaaa811894 ("bq27x00_battery: Fix OOPS caused by unregistring bq27x00 driver") Signed-off-by: Hans de Goede Signed-off-by: Sebastian Reichel Signed-off-by: Greg Kroah-Hartman

USB: core: Add routines for endpoint checks in old drivers

2023-05-30T11:38:38+00:00

commit 13890626501ffda22b18213ddaf7930473da5792 upstream. Many of the older USB drivers in the Linux USB stack were written based simply on a vendor's device specification. They use the endpoint information in the spec and assume these endpoints will always be present, with the properties listed, in any device matching the given vendor and product IDs. While that may have been true back then, with spoofing and fuzzing it is not true any more. More and more we are finding that those old drivers need to perform at least a minimum of checking before they try to use any endpoint other than ep0. To make this checking as simple as possible, we now add a couple of utility routines to the USB core. usb_check_bulk_endpoints() and usb_check_int_endpoints() take an interface pointer together with a list of endpoint addresses (numbers and directions). They check that the interface's current alternate setting includes endpoints with those addresses and that each of these endpoints has the right type: bulk or interrupt, respectively. Although we already have usb_find_common_endpoints() and related routines meant for a similar purpose, they are not well suited for this kind of checking. Those routines find endpoints of various kinds, but only one (either the first or the last) of each kind, and they don't verify that the endpoints' addresses agree with what the caller expects. In theory the new routines could be more general: They could take a particular altsetting as their argument instead of always using the interface's current altsetting. In practice I think this won't matter too much; multiple altsettings tend to be used for transferring media (audio or visual) over isochronous endpoints, not bulk or interrupt. Drivers for such devices will generally require more sophisticated checking than these simplistic routines provide. Signed-off-by: Alan Stern Link: https://lore.kernel.org/r/dd2c8e8c-2c87-44ea-ba17-c64b97e201c9@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman

sched: Fix KCSAN noinstr violation

2023-05-30T11:38:35+00:00

[ Upstream commit e0b081d17a9f4e5c0cbb0e5fbeb1abe3de0f7e4e ] With KCSAN enabled, end_of_stack() can get out-of-lined. Force it inline. Fixes the following warnings: vmlinux.o: warning: objtool: check_stackleak_irqoff+0x2b: call to end_of_stack() leaves .noinstr.text section Signed-off-by: Josh Poimboeuf Signed-off-by: Peter Zijlstra (Intel) Link: https://lore.kernel.org/r/cc1b4d73d3a428a00d206242a68fdf99a934ca7b.1681320026.git.jpoimboe@kernel.org Signed-off-by: Sasha Levin

printk: declare printk_deferred_{enter,safe}() in include/linux/printk.h

2023-05-17T09:11:51+00:00

commit 85e3e7fbbb720b9897fba9a99659e31cbd1c082e upstream. [This patch implements subset of original commit 85e3e7fbbb72 ("printk: remove NMI tracking") where commit 1007843a9190 ("mm/page_alloc: fix potential deadlock on zonelist_update_seq seqlock") depends on, for commit 3d36424b3b58 ("mm/page_alloc: fix race condition between build_all_zonelists and page allocation") was backported to stable.] All NMI contexts are handled the same as the safe context: store the message and defer printing. There is no need to have special NMI context tracking for this. Using in_nmi() is enough. There are several parts of the kernel that are manually calling into the printk NMI context tracking in order to cause general printk deferred printing: arch/arm/kernel/smp.c arch/powerpc/kexec/crash.c kernel/trace/trace.c For arm/kernel/smp.c and powerpc/kexec/crash.c, provide a new function pair printk_deferred_enter/exit that explicitly achieves the same objective. For ftrace, remove the printk context manipulation completely. It was added in commit 03fc7f9c99c1 ("printk/nmi: Prevent deadlock when accessing the main log buffer in NMI"). The purpose was to enforce storing messages directly into the ring buffer even in NMI context. It really should have only modified the behavior in NMI context. There is no need for a special behavior any longer. All messages are always stored directly now. The console deferring is handled transparently in vprintk(). Signed-off-by: John Ogness [pmladek@suse.com: Remove special handling in ftrace.c completely. Signed-off-by: Petr Mladek Link: https://lore.kernel.org/r/20210715193359.25946-5-john.ogness@linutronix.de [penguin-kernel: Copy only printk_deferred_{enter,safe}() definition ] Signed-off-by: Tetsuo Handa Signed-off-by: Greg Kroah-Hartman

tty: Prevent writing chars during tcsetattr TCSADRAIN/FLUSH

2023-05-17T09:11:51+00:00

If userspace races tcsetattr() with a write, the drained condition might not be guaranteed by the kernel. There is a race window after checking Tx is empty before tty_set_termios() takes termios_rwsem for write. During that race window, more characters can be queued by a racing writer. Any ongoing transmission might produce garbage during HW's ->set_termios() call. The intent of TCSADRAIN/FLUSH seems to be preventing such a character corruption. If those flags are set, take tty's write lock to stop any writer before performing the lower layer Tx empty check and wait for the pending characters to be sent (if any). The initial wait for all-writers-done must be placed outside of tty's write lock to avoid deadlock which makes it impossible to use tty_wait_until_sent(). The write lock is retried if a racing write is detected. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20230317113318.31327-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman (cherry picked from commit 094fb49a2d0d6827c86d2e0840873e6db0c491d2) Signed-off-by: Ilpo Järvinen Signed-off-by: Greg Kroah-Hartman

SUNRPC: remove the maximum number of retries in call_bind_status

2023-05-17T09:11:45+00:00

[ Upstream commit 691d0b782066a6eeeecbfceb7910a8f6184e6105 ] Currently call_bind_status places a hard limit of 3 to the number of retries on EACCES error. This limit was done to prevent NLM unlock requests from being hang forever when the server keeps returning garbage. However this change causes problem for cases when NLM service takes longer than 9 seconds to register with the port mapper after a restart. This patch removes this hard coded limit and let the RPC handles the retry based on the standard hard/soft task semantics. Fixes: 0b760113a3a1 ("NLM: Don't hang forever on NLM unlock requests") Reported-by: Helen Chao Tested-by: Helen Chao Signed-off-by: Dai Ngo Reviewed-by: Jeff Layton Signed-off-by: Anna Schumaker Signed-off-by: Sasha Levin

linux/vt_buffer.h: allow either builtin or modular for macros

2023-05-17T09:11:43+00:00

[ Upstream commit 2b76ffe81e32afd6d318dc4547e2ba8c46207b77 ] Fix build errors on ARCH=alpha when CONFIG_MDA_CONSOLE=m. This allows the ARCH macros to be the only ones defined. In file included from ../drivers/video/console/mdacon.c:37: ../arch/alpha/include/asm/vga.h:17:40: error: expected identifier or '(' before 'volatile' 17 | static inline void scr_writew(u16 val, volatile u16 *addr) | ^~~~~~~~ ../include/linux/vt_buffer.h:24:34: note: in definition of macro 'scr_writew' 24 | #define scr_writew(val, addr) (*(addr) = (val)) | ^~~~ ../include/linux/vt_buffer.h:24:40: error: expected ')' before '=' token 24 | #define scr_writew(val, addr) (*(addr) = (val)) | ^ ../arch/alpha/include/asm/vga.h:17:20: note: in expansion of macro 'scr_writew' 17 | static inline void scr_writew(u16 val, volatile u16 *addr) | ^~~~~~~~~~ ../arch/alpha/include/asm/vga.h:25:29: error: expected identifier or '(' before 'volatile' 25 | static inline u16 scr_readw(volatile const u16 *addr) | ^~~~~~~~ Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Randy Dunlap Cc: Greg Kroah-Hartman Cc: Jiri Slaby Cc: dri-devel@lists.freedesktop.org Cc: linux-fbdev@vger.kernel.org Link: https://lore.kernel.org/r/20230329021529.16188-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

ftrace: Mark get_lock_parent_ip() __always_inline

2023-04-20T10:02:11+00:00

commit ea65b41807a26495ff2a73dd8b1bab2751940887 upstream. If the compiler decides not to inline this function then preemption tracing will always show an IP inside the preemption disabling path and never the function actually calling preempt_{enable,disable}. Link: https://lore.kernel.org/linux-trace-kernel/20230327173647.1690849-1-john@metanate.com Cc: Masami Hiramatsu Cc: Mark Rutland Cc: stable@vger.kernel.org Fixes: f904f58263e1d ("sched/debug: Fix preempt_disable_ip recording for preempt_disable()") Signed-off-by: John Keeping Signed-off-by: Steven Rostedt (Google) Signed-off-by: Greg Kroah-Hartman

HID: core: Provide new max_buffer_size attribute to over-ride the default

2023-03-22T12:26:16+00:00

commit b1a37ed00d7908a991c1d0f18a8cba3c2aa99bdc upstream. Presently, when a report is processed, its proposed size, provided by the user of the API (as Report Size * Report Count) is compared against the subsystem default HID_MAX_BUFFER_SIZE (16k). However, some low-level HID drivers allocate a reduced amount of memory to their buffers (e.g. UHID only allocates UHID_DATA_MAX (4k) buffers), rending this check inadequate in some cases. In these circumstances, if the received report ends up being smaller than the proposed report size, the remainder of the buffer is zeroed. That is, the space between sizeof(csize) (size of the current report) and the rsize (size proposed i.e. Report Size * Report Count), which can be handled up to HID_MAX_BUFFER_SIZE (16k). Meaning that memset() shoots straight past the end of the buffer boundary and starts zeroing out in-use values, often resulting in calamity. This patch introduces a new variable into 'struct hid_ll_driver' where individual low-level drivers can over-ride the default maximum value of HID_MAX_BUFFER_SIZE (16k) with something more sympathetic to the interface. Signed-off-by: Lee Jones Signed-off-by: Jiri Kosina [Lee: Backported to v4.14.y] Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman