kernel/linux.git/include/linux, branch v4.14.277

etherdevice: Adjust ether_addr* prototypes to silence -Wstringop-overead

2022-04-27T11:15:28+00:00

commit 2618a0dae09ef37728dab89ff60418cbe25ae6bd upstream. With GCC 12, -Wstringop-overread was warning about an implicit cast from char[6] to char[8]. However, the extra 2 bytes are always thrown away, alignment doesn't matter, and the risk of hitting the edge of unallocated memory has been accepted, so this prototype can just be converted to a regular char *. Silences: net/core/dev.c: In function ‘bpf_prog_run_generic_xdp’: net/core/dev.c:4618:21: warning: ‘ether_addr_equal_64bits’ reading 8 bytes from a region of size 6 [-Wstringop-overread] 4618 | orig_host = ether_addr_equal_64bits(eth->h_dest, > skb->dev->dev_addr); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ net/core/dev.c:4618:21: note: referencing argument 1 of type ‘const u8[8]’ {aka ‘const unsigned char[8]’} net/core/dev.c:4618:21: note: referencing argument 2 of type ‘const u8[8]’ {aka ‘const unsigned char[8]’} In file included from net/core/dev.c:91: include/linux/etherdevice.h:375:20: note: in a call to function ‘ether_addr_equal_64bits’ 375 | static inline bool ether_addr_equal_64bits(const u8 addr1[6+2], | ^~~~~~~~~~~~~~~~~~~~~~~ Reported-by: Marc Kleine-Budde Tested-by: Marc Kleine-Budde Link: https://lore.kernel.org/netdev/20220212090811.uuzk6d76agw2vv73@pengutronix.de Cc: Jakub Kicinski Cc: "David S. Miller" Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook Signed-off-by: David S. Miller Cc: Khem Raj Signed-off-by: Greg Kroah-Hartman

mm/sparsemem: fix 'mem_section' will never be NULL gcc 12 warning

2022-04-20T07:08:30+00:00

commit a431dbbc540532b7465eae4fc8b56a85a9fc7d17 upstream. The gcc 12 compiler reports a "'mem_section' will never be NULL" warning on the following code: static inline struct mem_section *__nr_to_section(unsigned long nr) { #ifdef CONFIG_SPARSEMEM_EXTREME if (!mem_section) return NULL; #endif if (!mem_section[SECTION_NR_TO_ROOT(nr)]) return NULL; : It happens with CONFIG_SPARSEMEM_EXTREME off. The mem_section definition is #ifdef CONFIG_SPARSEMEM_EXTREME extern struct mem_section **mem_section; #else extern struct mem_section mem_section[NR_SECTION_ROOTS][SECTIONS_PER_ROOT]; #endif In the !CONFIG_SPARSEMEM_EXTREME case, mem_section is a static 2-dimensional array and so the check "!mem_section[SECTION_NR_TO_ROOT(nr)]" doesn't make sense. Fix this warning by moving the "!mem_section[SECTION_NR_TO_ROOT(nr)]" check up inside the CONFIG_SPARSEMEM_EXTREME block and adding an explicit NR_SECTION_ROOTS check to make sure that there is no out-of-bound array access. Link: https://lkml.kernel.org/r/20220331180246.2746210-1-longman@redhat.com Fixes: 3e347261a80b ("sparsemem extreme implementation") Signed-off-by: Waiman Long Reported-by: Justin Forbes Cc: "Kirill A . Shutemov" Cc: Ingo Molnar Cc: Rafael Aquini Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

NFS: swap IO handling is slightly different for O_DIRECT IO

2022-04-20T07:08:28+00:00

[ Upstream commit 64158668ac8b31626a8ce48db4cad08496eb8340 ] 1/ Taking the i_rwsem for swap IO triggers lockdep warnings regarding possible deadlocks with "fs_reclaim". These deadlocks could, I believe, eventuate if a buffered read on the swapfile was attempted. We don't need coherence with the page cache for a swap file, and buffered writes are forbidden anyway. There is no other need for i_rwsem during direct IO. So never take it for swap_rw() 2/ generic_write_checks() explicitly forbids writes to swap, and performs checks that are not needed for swap. So bypass it for swap_rw(). Signed-off-by: NeilBrown Signed-off-by: Trond Myklebust Signed-off-by: Sasha Levin

PCI: Reduce warnings on possible RW1C corruption

2022-04-20T07:08:18+00:00

[ Upstream commit 92c45b63ce22c8898aa41806e8d6692bcd577510 ] For hardware that only supports 32-bit writes to PCI there is the possibility of clearing RW1C (write-one-to-clear) bits. A rate-limited messages was introduced by fb2659230120, but rate-limiting is not the best choice here. Some devices may not show the warnings they should if another device has just produced a bunch of warnings. Also, the number of messages can be a nuisance on devices which are otherwise working fine. Change the ratelimit to a single warning per bus. This ensures no bus is 'starved' of emitting a warning and also that there isn't a continuous stream of warnings. It would be preferable to have a warning per device, but the pci_dev structure is not available here, and a lookup from devfn would be far too slow. Suggested-by: Bjorn Helgaas Fixes: fb2659230120 ("PCI: Warn on possible RW1C corruption for sub-32 bit config writes") Link: https://lore.kernel.org/r/20200806041455.11070-1-mark.tomlinson@alliedtelesis.co.nz Signed-off-by: Mark Tomlinson Signed-off-by: Bjorn Helgaas Reviewed-by: Florian Fainelli Reviewed-by: Rob Herring Acked-by: Scott Branden Signed-off-by: Sasha Levin

block: Add a helper to validate the block size

2022-04-20T07:08:08+00:00

commit 570b1cac477643cbf01a45fa5d018430a1fddbce upstream. There are some duplicated codes to validate the block size in block drivers. This limitation actually comes from block layer, so this patch tries to add a new block layer helper for that. Signed-off-by: Xie Yongji Link: https://lore.kernel.org/r/20211026144015.188-2-xieyongji@bytedance.com Signed-off-by: Jens Axboe Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman

netdevice: add the case if dev is NULL

2022-04-20T07:08:08+00:00

commit b37a466837393af72fe8bcb8f1436410f3f173f3 upstream. Add the case if dev is NULL in dev_{put, hold}, so the caller doesn't need to care whether dev is NULL or not. Signed-off-by: Yajun Deng Signed-off-by: David S. Miller Cc: Pavel Machek Signed-off-by: Greg Kroah-Hartman

arm64: entry: Add vectors that have the bhb mitigation sequences

2022-04-02T10:41:10+00:00

commit ba2689234be92024e5635d30fe744f4853ad97db upstream. Some CPUs affected by Spectre-BHB need a sequence of branches, or a firmware call to be run before any indirect branch. This needs to go in the vectors. No CPU needs both. While this can be patched in, it would run on all CPUs as there is a single set of vectors. If only one part of a big/little combination is affected, the unaffected CPUs have to run the mitigation too. Create extra vectors that include the sequence. Subsequent patches will allow affected CPUs to select this set of vectors. Later patches will modify the loop count to match what the CPU requires. Reviewed-by: Catalin Marinas Signed-off-by: James Morse Signed-off-by: Greg Kroah-Hartman

net: handle ARPHRD_PIMREG in dev_is_mac_header_xmit()

2022-03-23T08:01:35+00:00

[ Upstream commit 4ee06de7729d795773145692e246a06448b1eb7a ] This kind of interface doesn't have a mac header. This patch fixes bpf_redirect() to a PIM interface. Fixes: 27b29f63058d ("bpf: add bpf_redirect() helper") Signed-off-by: Nicolas Dichtel Link: https://lore.kernel.org/r/20220315092008.31423-1-nicolas.dichtel@6wind.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

virtio: acknowledge all features before access

2022-03-16T11:57:09+00:00

commit 4fa59ede95195f267101a1b8916992cf3f245cdb upstream. The feature negotiation was designed in a way that makes it possible for devices to know which config fields will be accessed by drivers. This is broken since commit 404123c2db79 ("virtio: allow drivers to validate features") with fallout in at least block and net. We have a partial work-around in commit 2f9a174f918e ("virtio: write back F_VERSION_1 before validate") which at least lets devices find out which format should config space have, but this is a partial fix: guests should not access config space without acknowledging features since otherwise we'll never be able to change the config space format. To fix, split finalize_features from virtio_finalize_features and call finalize_features with all feature bits before validation, and then - if validation changed any bits - once again after. Since virtio_finalize_features no longer writes out features rename it to virtio_features_ok - since that is what it does: checks that features are ok with the device. As a side effect, this also reduces the amount of hypervisor accesses - we now only acknowledge features once unless we are clearing any features when validating (which is uncommon). IRC I think that this was more or less always the intent in the spec but unfortunately the way the spec is worded does not say this explicitly, I plan to address this at the spec level, too. Acked-by: Jason Wang Cc: stable@vger.kernel.org Fixes: 404123c2db79 ("virtio: allow drivers to validate features") Fixes: 2f9a174f918e ("virtio: write back F_VERSION_1 before validate") Cc: "Halil Pasic" Signed-off-by: Michael S. Tsirkin Signed-off-by: Greg Kroah-Hartman

virtio: unexport virtio_finalize_features

2022-03-16T11:57:09+00:00

commit 838d6d3461db0fdbf33fc5f8a69c27b50b4a46da upstream. virtio_finalize_features is only used internally within virtio. No reason to export it. Signed-off-by: Michael S. Tsirkin Reviewed-by: Cornelia Huck Acked-by: Jason Wang Signed-off-by: Greg Kroah-Hartman