kernel/linux.git/include/linux, branch v3.6.6

libceph: check for invalid mapping

2012-11-05T08:56:50+00:00

commit d63b77f4c552cc3a20506871046ab0fcbc332609 upstream. If we encounter an invalid (e.g., zeroed) mapping, return an error and avoid a divide by zero. Signed-off-by: Sage Weil Reviewed-by: Alex Elder Signed-off-by: Greg Kroah-Hartman

efi: Defer freeing boot services memory until after ACPI init

2012-10-31T17:10:31+00:00

commit 785107923a83d8456bbd8564e288a24d84109a46 upstream. Some new ACPI 5.0 tables reference resources stored in boot services memory, so keep that memory around until we have ACPI and can extract data from it. Signed-off-by: Josh Triplett Link: http://lkml.kernel.org/r/baaa6d44bdc4eb0c58e5d1b4ccd2c729f854ac55.1348876882.git.josh@joshtriplett.org Signed-off-by: H. Peter Anvin Cc: Matt Fleming Signed-off-by: Greg Kroah-Hartman

x86, mm: Trim memory in memblock to be page aligned

2012-10-31T17:09:56+00:00

commit 6ede1fd3cb404c0016de6ac529df46d561bd558b upstream. We will not map partial pages, so need to make sure memblock allocation will not allocate those bytes out. Also we will use for_each_mem_pfn_range() to loop to map memory range to keep them consistent. Signed-off-by: Yinghai Lu Link: http://lkml.kernel.org/r/CAE9FiQVZirvaBMFYRfXMmWEcHbKSicQEHz4VAwUv0xFCk51ZNw@mail.gmail.com Acked-by: Jacob Shin Signed-off-by: H. Peter Anvin Signed-off-by: Greg Kroah-Hartman

vlan: don't deliver frames for unknown vlans to protocols

2012-10-28T17:56:17+00:00

[ Upstream commit 48cc32d38a52d0b68f91a171a8d00531edc6a46e ] 6a32e4f9dd9219261f8856f817e6655114cfec2f made the vlan code skip marking vlan-tagged frames for not locally configured vlans as PACKET_OTHERHOST if there was an rx_handler, as the rx_handler could cause the frame to be received on a different (virtual) vlan-capable interface where that vlan might be configured. As rx_handlers do not necessarily return RX_HANDLER_ANOTHER, this could cause frames for unknown vlans to be delivered to the protocol stack as if they had been received untagged. For example, if an ipv6 router advertisement that's tagged for a locally not configured vlan is received on an interface with macvlan interfaces attached, macvlan's rx_handler returns RX_HANDLER_PASS after delivering the frame to the macvlan interfaces, which caused it to be passed to the protocol stack, leading to ipv6 addresses for the announced prefix being configured even though those are completely unusable on the underlying interface. The fix moves marking as PACKET_OTHERHOST after the rx_handler so the rx_handler, if there is one, sees the frame unchanged, but afterwards, before the frame is delivered to the protocol stack, it gets marked whether there is an rx_handler or not. Signed-off-by: Florian Zumbiehl Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: remove skb recycling

2012-10-28T17:56:16+00:00

[ Upstream commits acb600def2110b1310466c0e485c0d26299898ae and 66eef59f22275002f621ff9d951886b513d011b3. ] Over time, skb recycling infrastructure got litle interest and many bugs. Generic rx path skb allocation is now using page fragments for efficient GRO / TCP coalescing, and recyling a tx skb for rx path is not worth the pain. Last identified bug is that fat skbs can be recycled and it can endup using high order pages after few iterations. With help from Maxime Bizon, who pointed out that commit 87151b8689d (net: allow pskb_expand_head() to get maximum tailroom) introduced this regression for recycled skbs. Instead of fixing this bug, lets remove skb recycling. Drivers wanting really hot skbs should use build_skb() anyway, to allocate/populate sk_buff right before netif_receive_skb() Signed-off-by: Eric Dumazet Cc: Maxime Bizon Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

netlink: add reference of module in netlink_dump_start

2012-10-28T17:56:16+00:00

[ Upstream commit 6dc878a8ca39e93f70c42f3dd7260bde10c1e0f1 ] I get a panic when I use ss -a and rmmod inet_diag at the same time. It's because netlink_dump uses inet_diag_dump which belongs to module inet_diag. I search the codes and find many modules have the same problem. We need to add a reference to the module which the cb->dump belongs to. Thanks for all help from Stephen,Jan,Eric,Steffen and Pablo. Change From v3: change netlink_dump_start to inline,suggestion from Pablo and Eric. Change From v2: delete netlink_dump_done,and call module_put in netlink_dump and netlink_sock_destruct. Signed-off-by: Gao feng Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

mtd: nand: allow NAND_NO_SUBPAGE_WRITE to be set from driver

2012-10-21T16:32:42+00:00

commit bf7a01bf7987b63b121d572b240c132ec44129c4 upstream. The NAND_CHIPOPTIONS_MSK has limited utility and is causing real bugs. It silently masks off at least one flag that might be set by the driver (NAND_NO_SUBPAGE_WRITE). This breaks the GPMI NAND driver and possibly others. Really, as long as driver writers exercise a small amount of care with NAND_* options, this mask is not necessary at all; it was only here to prevent certain options from accidentally being set by the driver. But the original thought turns out to be a bad idea occasionally. Thus, kill it. Note, this patch fixes some major gpmi-nand breakage. Signed-off-by: Brian Norris Tested-by: Huang Shijie Cc: stable@vger.kernel.org Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse Signed-off-by: Greg Kroah-Hartman index a11253a..c429abd 100644

mempolicy: fix a race in shared_policy_replace()

2012-10-12T20:50:32+00:00

commit b22d127a39ddd10d93deee3d96e643657ad53a49 upstream. shared_policy_replace() use of sp_alloc() is unsafe. 1) sp_node cannot be dereferenced if sp->lock is not held and 2) another thread can modify sp_node between spin_unlock for allocating a new sp node and next spin_lock. The bug was introduced before 2.6.12-rc2. Kosaki's original patch for this problem was to allocate an sp node and policy within shared_policy_replace and initialise it when the lock is reacquired. I was not keen on this approach because it partially duplicates sp_alloc(). As the paths were sp->lock is taken are not that performance critical this patch converts sp->lock to sp->mutex so it can sleep when calling sp_alloc(). [kosaki.motohiro@jp.fujitsu.com: Original patch] Signed-off-by: Mel Gorman Acked-by: KOSAKI Motohiro Reviewed-by: Christoph Lameter Cc: Josh Boyer Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

serial: set correct baud_base for EXSYS EX-41092 Dual 16950

2012-10-07T15:39:32+00:00

commit 26e8220adb0aec43b7acafa0f1431760eee28522 upstream. Apparently the same card model has two IDs, so this patch complements the commit 39aced68d664291db3324d0fcf0985ab5626aac2 adding the missing one. Signed-off-by: Flavio Leitner Signed-off-by: Greg Kroah-Hartman

Merge tag 'iommu-fixes-v3.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

2012-09-29T17:37:04+00:00

Pull IOMMU fixes from Joerg Roedel: "Two small patches: * One patch to fix the function declarations for !CONFIG_IOMMU_API. This is causing build errors in linux-next and should be fixed for v3.6. * Another patch to fix an IOMMU group related NULL pointer dereference." * tag 'iommu-fixes-v3.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: Fix wrong assumption in iommu-group specific code iommu: static inline iommu group stub functions