kernel/linux.git/include/linux/vmpressure.h, branch v6.12.80

mm/vmpressure: replace vmpressure_to_css() with vmpressure_to_memcg()

2021-09-03T16:58:17+00:00

We can get memcg directly form vmpr instead of vmpr->memcg->css->memcg, so add a new func helper vmpressure_to_memcg(). And no code will use vmpressure_to_css(), so delete it. Link: https://lkml.kernel.org/r/20210630112146.455103-1-suhui@zeku.com Signed-off-by: Hui Su Acked-by: Michal Hocko Acked-by: Chris Down Cc: Johannes Weiner Cc: Vladimir Davydov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

include/linux/vmpressure.h: use spinlock_t instead of struct spinlock

2019-07-12T18:05:43+00:00

For spinlocks the type spinlock_t should be used instead of "struct spinlock". Use spinlock_t for spinlock's definition. Link: http://lkml.kernel.org/r/20190704153803.12739-3-bigeasy@linutronix.de Signed-off-by: Sebastian Andrzej Siewior Reviewed-by: Andrew Morton Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

mm: memcontrol: hook up vmpressure to socket pressure

2016-01-15T00:00:49+00:00

Let the networking stack know when a memcg is under reclaim pressure so that it can clamp its transmit windows accordingly. Whenever the reclaim efficiency of a cgroup's LRU lists drops low enough for a MEDIUM or HIGH vmpressure event to occur, assert a pressure state in the socket and tcp memory code that tells it to curb consumption growth from sockets associated with said control group. Traditionally, vmpressure reports for the entire subtree of a memcg under pressure, which drops useful information on the individual groups reclaimed. However, it's too late to change the userinterface, so add a second reporting mode that reports on the level of reclaim instead of at the level of pressure, and use that report for sockets. vmpressure events are naturally edge triggered, so for hysteresis assert socket pressure for a second to allow for subsequent vmpressure events to occur before letting the socket code return to normal. This will likely need finetuning for a wider variety of workloads, but for now stick to the vmpressure presets and keep hysteresis simple. Signed-off-by: Johannes Weiner Acked-by: David S. Miller Reviewed-by: Vladimir Davydov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

memcg: make cgroup_event deal with mem_cgroup instead of cgroup_subsys_state

2013-11-22T23:20:43+00:00

cgroup_event is now memcg specific. Replace cgroup_event->css with ->memcg and convert [un]register_event() callbacks to take mem_cgroup pointer instead of cgroup_subsys_state one. This simplifies the code slightly and makes css_to_vmpressure() unnecessary which is removed. Signed-off-by: Tejun Heo Acked-by: Li Zefan Acked-by: Kirill A. Shutemov Acked-by: Michal Hocko

memcg: remove cgroup_event->cft

2013-11-22T23:20:43+00:00

The only use of cgroup_event->cft is distinguishing "usage_in_bytes" and "memsw.usgae_in_bytes" for mem_cgroup_usage_[un]register_event(), which can be done by adding an explicit argument to the function and implementing two wrappers so that the two cases can be distinguished from the function alone. Remove cgroup_event->cft and the related code including [un]register_events() methods. Signed-off-by: Tejun Heo Acked-by: Li Zefan Acked-by: Kirill A. Shutemov Acked-by: Michal Hocko

cgroup, memcg: move cgroup->event_list[_lock] and event callbacks into memcg

2013-11-22T23:20:43+00:00

cgroup_event is being moved from cgroup core to memcg and the implementation is already moved by the previous patch. This patch moves the data fields and callbacks. * cgroup->event_list[_lock] are moved to mem_cgroup. * cftype->[un]register_event() are moved to cgroup_event. This makes it impossible for individual cftype definitions to specify their event callbacks. This is worked around by simply hard-coding filename to event callback mapping in cgroup_write_event_control(). This is awkward and inflexible, which is actually desirable given that we don't want to grow more usages of this feature. * eventfd_ctx declaration is removed from cgroup.h, which makes vmpressure.h miss eventfd_ctx declaration. Include eventfd.h from vmpressure.h. v2: Use file name from dentry instead of cftype. This will allow removing all cftype handling in the function. Signed-off-by: Tejun Heo Acked-by: Li Zefan Acked-by: Kirill A. Shutemov Acked-by: Michal Hocko Cc: Johannes Weiner Cc: Balbir Singh

Merge branch 'for-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup

2013-09-04T01:25:03+00:00

Pull cgroup updates from Tejun Heo: "A lot of activities on the cgroup front. Most changes aren't visible to userland at all at this point and are laying foundation for the planned unified hierarchy. - The biggest change is decoupling the lifetime management of css (cgroup_subsys_state) from that of cgroup's. Because controllers (cpu, memory, block and so on) will need to be dynamically enabled and disabled, css which is the association point between a cgroup and a controller may come and go dynamically across the lifetime of a cgroup. Till now, css's were created when the associated cgroup was created and stayed till the cgroup got destroyed. Assumptions around this tight coupling permeated through cgroup core and controllers. These assumptions are gradually removed, which consists bulk of patches, and css destruction path is completely decoupled from cgroup destruction path. Note that decoupling of creation path is relatively easy on top of these changes and the patchset is pending for the next window. - cgroup has its own event mechanism cgroup.event_control, which is only used by memcg. It is overly complex trying to achieve high flexibility whose benefits seem dubious at best. Going forward, new events will simply generate file modified event and the existing mechanism is being made specific to memcg. This pull request contains prepatory patches for such change. - Various fixes and cleanups" Fixed up conflict in kernel/cgroup.c as per Tejun. * 'for-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (69 commits) cgroup: fix cgroup_css() invocation in css_from_id() cgroup: make cgroup_write_event_control() use css_from_dir() instead of __d_cgrp() cgroup: make cgroup_event hold onto cgroup_subsys_state instead of cgroup cgroup: implement CFTYPE_NO_PREFIX cgroup: make cgroup_css() take cgroup_subsys * instead and allow NULL subsys cgroup: rename cgroup_css_from_dir() to css_from_dir() and update its syntax cgroup: fix cgroup_write_event_control() cgroup: fix subsystem file accesses on the root cgroup cgroup: change cgroup_from_id() to css_from_id() cgroup: use css_get() in cgroup_create() to check CSS_ROOT cpuset: remove an unncessary forward declaration cgroup: RCU protect each cgroup_subsys_state release cgroup: move subsys file removal to kill_css() cgroup: factor out kill_css() cgroup: decouple cgroup_subsys_state destruction from cgroup destruction cgroup: replace cgroup->css_kill_cnt with ->nr_css cgroup: bounce cgroup_subsys_state ref kill confirmation to a work item cgroup: move cgroup->subsys[] assignment to online_css() cgroup: reorganize css init / exit paths cgroup: add __rcu modifier to cgroup->subsys[] ...

cgroup: make cftype->[un]register_event() deal with cgroup_subsys_state instead of cgroup

2013-08-09T00:11:26+00:00

cgroup is in the process of converting to css (cgroup_subsys_state) from cgroup as the principal subsystem interface handle. This is mostly to prepare for the unified hierarchy support where css's will be created and destroyed dynamically but also helps cleaning up subsystem implementations as css is usually what they are interested in anyway. cftype->[un]register_event() is among the remaining couple interfaces which still use struct cgroup. Convert it to cgroup_subsys_state. The conversion is mostly mechanical and removes the last users of mem_cgroup_from_cont() and cg_to_vmpressure(), which are removed. v2: indentation update as suggested by Li Zefan. Signed-off-by: Tejun Heo Acked-by: Li Zefan Acked-by: Michal Hocko Cc: Johannes Weiner Cc: Balbir Singh

vmpressure: make sure there are no events queued after memcg is offlined

2013-07-31T21:41:04+00:00

vmpressure is called synchronously from reclaim where the target_memcg is guaranteed to be alive but the eventfd is signaled from the work queue context. This means that memcg (along with vmpressure structure which is embedded into it) might go away while the work item is pending which would result in use-after-release bug. We have two possible ways how to fix this. Either vmpressure pins memcg before it schedules vmpr->work and unpin it in vmpressure_work_fn or explicitely flush the work item from the css_offline context (as suggested by Tejun). This patch implements the later one and it introduces vmpressure_cleanup which flushes the vmpressure work queue item item. It hooks into mem_cgroup_css_offline after the memcg itself is cleaned up. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Michal Hocko Reported-by: Tejun Heo Cc: Anton Vorontsov Cc: Johannes Weiner Cc: KAMEZAWA Hiroyuki Cc: KOSAKI Motohiro Cc: Li Zefan Acked-by: Tejun Heo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds