kernel/linux.git/include/linux/usb, branch v5.10.240

usb: typec: altmodes/displayport: do not index invalid pin_assignments

2025-07-17T16:27:45+00:00

commit af4db5a35a4ef7a68046883bfd12468007db38f1 upstream. A poorly implemented DisplayPort Alt Mode port partner can indicate that its pin assignment capabilities are greater than the maximum value, DP_PIN_ASSIGN_F. In this case, calls to pin_assignment_show will cause a BRK exception due to an out of bounds array access. Prevent for loop in pin_assignment_show from accessing invalid values in pin_assignments by adding DP_PIN_ASSIGN_MAX value in typec_dp.h and using i < DP_PIN_ASSIGN_MAX as a loop condition. Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode") Cc: stable Signed-off-by: RD Babiera Reviewed-by: Badhri Jagan Sridharan Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20250618224943.3263103-2-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman

usb: xhci: Add timeout argument in address_device USB HCD callback

2025-03-13T11:47:03+00:00

[ Upstream commit a769154c7cac037914ba375ae88aae55b2c853e0 ] - The HCD address_device callback now accepts a user-defined timeout value in milliseconds, providing better control over command execution times. - The default timeout value for the address_device command has been set to 5000 ms, aligning with the USB 3.2 specification. However, this timeout can be adjusted as needed. - The xhci_setup_device function has been updated to accept the timeout value, allowing it to specify the maximum wait time for the command operation to complete. - The hub driver has also been updated to accommodate the newly added timeout parameter during the SET_ADDRESS request. Signed-off-by: Hardik Gajjar Reviewed-by: Mathias Nyman Link: https://lore.kernel.org/r/20231027152029.104363-1-hgajjar@de.adit-jv.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 1e0a19912adb ("usb: xhci: Fix NULL pointer dereference on certain command aborts") Signed-off-by: Sasha Levin

xhci: use pm_ptr() instead of #ifdef for CONFIG_PM conditionals

2025-02-01T17:22:34+00:00

commit 130eac4170859fb368681e00d390f20f44bbf27b upstream. A recent patch caused an unused-function warning in builds with CONFIG_PM disabled, after the function became marked 'static': drivers/usb/host/xhci-pci.c:91:13: error: 'xhci_msix_sync_irqs' defined but not used [-Werror=unused-function] 91 | static void xhci_msix_sync_irqs(struct xhci_hcd *xhci) | ^~~~~~~~~~~~~~~~~~~ This could be solved by adding another #ifdef, but as there is a trend towards removing CONFIG_PM checks in favor of helper macros, do the same conversion here and use pm_ptr() to get either a function pointer or NULL but avoid the warning. As the hidden functions reference some other symbols, make sure those are visible at compile time, at the minimal cost of a few extra bytes for 'struct usb_device'. Fixes: 9abe15d55dcc ("xhci: Move xhci MSI sync function to to xhci-pci") Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20230328131114.1296430-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman

usb: typec: bus: verify partner exists in typec_altmode_attention

2023-09-19T10:20:23+00:00

commit f23643306430f86e2f413ee2b986e0773e79da31 upstream. Some usb hubs will negotiate DisplayPort Alt mode with the device but will then negotiate a data role swap after entering the alt mode. The data role swap causes the device to unregister all alt modes, however the usb hub will still send Attention messages even after failing to reregister the Alt Mode. type_altmode_attention currently does not verify whether or not a device's altmode partner exists, which results in a NULL pointer error when dereferencing the typec_altmode and typec_altmode_ops belonging to the altmode partner. Verify the presence of a device's altmode partner before sending the Attention message to the Alt Mode driver. Fixes: 8a37d87d72f0 ("usb: typec: Bus type for alternate modes") Cc: stable@vger.kernel.org Signed-off-by: RD Babiera Reviewed-by: Heikki Krogerus Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20230814180559.923475-1-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman

usb: gadget: udc: core: Introduce check_config to verify USB configuration

2023-08-26T13:26:48+00:00

[ Upstream commit ce7d0008c2356626f69f37ef1afce8fbc83fe142 ] Some UDCs may have constraints on how many high bandwidth endpoints it can support in a certain configuration. This API allows for the composite driver to pass down the total number of endpoints to the UDC so it can verify it has the required resources to support the configuration. Signed-off-by: Wesley Cheng Link: https://lore.kernel.org/r/1625908395-5498-2-git-send-email-wcheng@codeaurora.org Signed-off-by: Greg Kroah-Hartman Stable-dep-of: dbe678f6192f ("usb: cdns3: fix NCM gadget RX speed 20x slow than expection at iMX8QM") Signed-off-by: Sasha Levin

Revert "usb: common: usb-conn-gpio: Set last role to unknown before initial detection"

2023-07-27T06:44:06+00:00

[ Upstream commit df49f2a0ac4a34c0cb4b5c233fcfa0add644c43c ] This reverts commit edd60d24bd858cef165274e4cd6cab43bdc58d15. Heikki reports that this should not be a global flag just to work around one broken driver and should be fixed differently, so revert it. Reported-by: Heikki Krogerus Fixes: edd60d24bd85 ("usb: common: usb-conn-gpio: Set last role to unknown before initial detection") Link: https://lore.kernel.org/r/ZImE4L3YgABnCIsP@kuha.fi.intel.com Cc: Prashanth K Cc: AngeloGioacchino Del Regno Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: common: usb-conn-gpio: Set last role to unknown before initial detection

2023-07-27T06:44:06+00:00

[ Upstream commit edd60d24bd858cef165274e4cd6cab43bdc58d15 ] Currently if we bootup a device without cable connected, then usb-conn-gpio won't call set_role() since last_role is same as current role. This happens because during probe last_role gets initialised to zero. To avoid this, added a new constant in enum usb_role, last_role is set to USB_ROLE_UNKNOWN before performing initial detection. While at it, also handle default case for the usb_role switch in cdns3, intel-xhci-usb-role-switch & musb/jz4740 to avoid build warnings. Fixes: 4602f3bff266 ("usb: common: add USB GPIO based connection detection driver") Signed-off-by: Prashanth K Reviewed-by: AngeloGioacchino Del Regno Message-ID: <1685544074-17337-1-git-send-email-quic_prashk@quicinc.com> Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: usbfs: Enforce page requirements for mmap

2023-06-14T09:09:55+00:00

commit 0143d148d1e882fb1538dc9974c94d63961719b9 upstream. The current implementation of usbdev_mmap uses usb_alloc_coherent to allocate memory pages that will later be mapped into the user space. Meanwhile, usb_alloc_coherent employs three different methods to allocate memory, as outlined below: * If hcd->localmem_pool is non-null, it uses gen_pool_dma_alloc to allocate memory; * If DMA is not available, it uses kmalloc to allocate memory; * Otherwise, it uses dma_alloc_coherent. However, it should be noted that gen_pool_dma_alloc does not guarantee that the resulting memory will be page-aligned. Furthermore, trying to map slab pages (i.e., memory allocated by kmalloc) into the user space is not resonable and can lead to problems, such as a type confusion bug when PAGE_TABLE_CHECK=y [1]. To address these issues, this patch introduces hcd_alloc_coherent_pages, which addresses the above two problems. Specifically, hcd_alloc_coherent_pages uses gen_pool_dma_alloc_align instead of gen_pool_dma_alloc to ensure that the memory is page-aligned. To replace kmalloc, hcd_alloc_coherent_pages directly allocates pages by calling __get_free_pages. Reported-by: syzbot+fcf1a817ceb50935ce99@syzkaller.appspotmail.comm Closes: https://lore.kernel.org/lkml/000000000000258e5e05fae79fc1@google.com/ [1] Fixes: f7d34b445abc ("USB: Add support for usbfs zerocopy.") Fixes: ff2437befd8f ("usb: host: Fix excessive alignment restriction for local memory allocations") Cc: stable@vger.kernel.org Signed-off-by: Ruihan Li Acked-by: Alan Stern Link: https://lore.kernel.org/r/20230515130958.32471-2-lrh2000@pku.edu.cn Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman

usb: common: move function's kerneldoc next to its definition

2022-10-26T11:25:31+00:00

[ Upstream commit 365038f24b3e9d2b7c9e499f03f432040e28a35c ] Following a general rule, add the kerneldoc for a function next to it's definition, but not next to its declaration in a header file. Suggested-by: Alan Stern Suggested-by: Greg Kroah-Hartman Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/c4d2e010ae2bf67cdfa0b55e6d1deb9339d9d3dc.1615170625.git.chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: b6155eaf6b05 ("usb: common: debug: Check non-standard control requests") Signed-off-by: Sasha Levin

usb: common: add function to get interval expressed in us unit

2022-10-26T11:25:31+00:00

[ Upstream commit fb95c7cf5600b7b74412f27dfb39a1e13fd8a90d ] Add a new function to convert bInterval into the time expressed in 1us unit. Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/25c8a09b055f716c1e5bf11fea72c3418f844482.1615170625.git.chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: b6155eaf6b05 ("usb: common: debug: Check non-standard control requests") Signed-off-by: Sasha Levin