kernel/linux.git/include/linux/usb, branch v4.5.3

Merge tag 'usb-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2016-01-13T17:26:40+00:00

Pull USB updates from Greg KH: "Here is the big USB drivers update for 4.5-rc1. Lots of gadget driver updates and fixes, like usual, and a mix of other USB driver updates as well. Full details in the shortlog. All of these have been in linux-next for a while" * tag 'usb-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (191 commits) MAINTAINERS: change my email address USB: usbmon: remove assignment from IS_ERR argument USB: mxu11x0: drop redundant function name from error messages USB: mxu11x0: fix debug-message typos USB: mxu11x0: rename usb-serial driver USB: mxu11x0: fix modem-control handling on B0-transitions USB: mxu11x0: fix memory leak on firmware download USB: mxu11x0: fix memory leak in port-probe error path USB: serial: add Moxa UPORT 11x0 driver USB: cp210x: add ID for ELV Marble Sound Board 1 usb: chipidea: otg: use usb autosuspend to suspend bus for HNP usb: chipidea: host: set host to be null after hcd is freed usb: chipidea: removing of_find_property usb: chipidea: implement platform shutdown callback usb: chipidea: clean up CONFIG_USB_CHIPIDEA_DEBUG reference usb: chipidea: delete static debug support usb: chipidea: support debugfs without CONFIG_USB_CHIPIDEA_DEBUG usb: chipidea: udc: improve error handling on _hardware_enqueue usb: chipidea: udc: _ep_queue and _hw_queue cleanup usb: dwc3: of-simple: fix build warning on !PM ...

Merge tag 'usb-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

2015-12-27T00:56:25+00:00

Felipe writes: usb: patches for v4.5 A ton of improvements to dwc2 have been made. The driver should be a lot more stable on v4.5 then ever before. Our good old dwc3 got a few cleanups and misc fixes and also added support to Xilinx's integration of this IP. Yoshihiro Shimoda gives us support for a new USB3 peripheral controller from Renesas. Other than these, the usual misc fixes all over the place.

net: cdc_ncm: avoid changing RX/TX buffers on MTU changes

2015-12-24T03:52:08+00:00

NCM buffer sizes are negotiated with the device independently of the network device MTU. The RX buffers are allocated by the usbnet framework based on the rx_urb_size value set by cdc_ncm. A single RX buffer can hold a number of MTU sized packets. The default usbnet change_mtu ndo only modifies rx_urb_size if it is equal to hard_mtu. And the cdc_ncm driver will set rx_urb_size and hard_mtu independently of each other, based on dwNtbInMaxSize and dwNtbOutMaxSize respectively. It was therefore assumed that usbnet_change_mtu() would never touch rx_urb_size. This failed to consider the case where dwNtbInMaxSize and dwNtbOutMaxSize happens to be equal. Fix by implementing an NCM specific change_mtu ndo, modifying the netdev MTU without touching the buffer size settings. Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller

usb: gadget: forbid queuing request to a disabled ep

2015-12-22T18:04:05+00:00

Queue a request to disabled ep doesn't make sense, and induce caller make mistakes. Here is a example for the android mtp gadget function driver. A mem corruption can happen on below senario. 1) On disconnect, mtp driver disable its EPs, 2) During send_file_work and receive_file_work, mtp queues a request to ep. (The mtp driver need improve its synchronization logic!) 3) mtp_function_unbind is invoked and all mtp requests are freed. 4) when udc process the request queued on step 2, will cause kernel NULL pointer dereference exception. Signed-off-by: Du, Changbin Signed-off-by: Felipe Balbi

usb: of: fix build breakage on !OF

2015-12-17T15:55:41+00:00

If OF is disabled, we will try to define a stub for of_usb_get_dr_mode_by_phy(), however that missed a static inline annotation which made us redefine the stub over and over again. Fix that. Fixes: 98bfb3946695 ("usb: of: add an api to get dr_mode by the phy node") Signed-off-by: Felipe Balbi

usb: musb: core: Fix handling of the phy notifications

2015-12-16T16:07:28+00:00

We currently can't unload omap2430 MUSB platform glue driver module and this cause issues for fixing the MUSB code further. The reason we can't remove omap2430 is because it uses the PHY functions and also exports the omap_musb_mailbox function that some PHY drivers are using. Let's fix the issue by exporting a more generic musb_mailbox function from the MUSB core and allow platform glue layers to register phy_callback function as needed. And now we can now also get rid of the include/linux/musb-omap.h. Cc: Bin Liu Cc: Felipe Balbi Cc: Kishon Vijay Abraham I Cc: NeilBrown Reviewed-by: Kishon Vijay Abraham I Signed-off-by: Tony Lindgren Signed-off-by: Felipe Balbi

usb: gadget: udc-core: independent registration of gadgets and gadget drivers

2015-12-16T16:07:27+00:00

Change behavior during registration of gadgets and gadget drivers in udc-core. Instead of previous approach when for successful probe of usb gadget driver at least one usb gadget should be already registered use another one where gadget drivers and gadgets can be registered in udc-core independently. Independent registration of gadgets and gadget drivers is useful for built-in into kernel gadget and gadget driver case - because it's possible that gadget is really probed only on late_init stage (due to deferred probe) whereas gadget driver's probe is silently failed on module_init stage due to no any UDC added. Also it is useful for modules case - now there is no difference what module to insert first: gadget module or gadget driver one. Tested-by: Maxime Ripard Signed-off-by: Ruslan Bilovol [simplified code as requested by Alan Stern and Felipe Balbi, fixed checkpatch issues] Signed-off-by: Marek Szyprowski Tested-by: Peter Chen Signed-off-by: Felipe Balbi

usb: gadget: udc-core: remove unused usb_udc_attach_driver()

2015-12-16T16:07:26+00:00

Now when last user of usb_udc_attach_driver() is switched to passing UDC name via usb_gadget_driver struct, it's safe to remove this function Tested-by: Maxime Ripard Signed-off-by: Ruslan Bilovol Signed-off-by: Marek Szyprowski Tested-by: Peter Chen Signed-off-by: Felipe Balbi

usb: gadget: bind UDC by name passed via usb_gadget_driver structure

2015-12-16T16:07:26+00:00

Introduce new 'udc_name' member to usb_gadget_driver structure. The 'udc_name' is a name of UDC that usb_gadget_driver should be bound to. If udc_name is NULL, it will be bound to any available UDC. Tested-by: Maxime Ripard Signed-off-by: Ruslan Bilovol Signed-off-by: Marek Szyprowski Tested-by: Peter Chen Signed-off-by: Felipe Balbi

usb: of: add an api to get dr_mode by the phy node

2015-12-15T15:12:41+00:00

Some USB phy drivers have different handling for the controller in each dr_mode. But the phy driver does not have visibility to the dr_mode of the controller. This adds an api to return the dr_mode of the controller which associates the given phy node. Signed-off-by: Bin Liu Signed-off-by: Felipe Balbi