kernel/linux.git/include/linux/usb, branch v3.2.95

USB: fix out-of-bounds in usb_set_configuration

2017-11-11T13:34:40+00:00

commit bd7a3fe770ebd8391d1c7d072ff88e9e76d063eb upstream. Andrey Konovalov reported a possible out-of-bounds problem for a USB interface association descriptor. He writes: It seems there's no proper size check of a USB_DT_INTERFACE_ASSOCIATION descriptor. It's only checked that the size is >= 2 in usb_parse_configuration(), so find_iad() might do out-of-bounds access to intf_assoc->bInterfaceCount. And he's right, we don't check for crazy descriptors of this type very well, so resolve this problem. Yet another issue found by syzkaller... Reported-by: Andrey Konovalov Tested-by: Andrey Konovalov Signed-off-by: Greg Kroah-Hartman [bwh: Backported to 3.2: adjust filename] Signed-off-by: Ben Hutchings

usb: Fix typo in the definition of Endpoint[out]Request

2017-10-12T14:27:09+00:00

commit 7cf916bd639bd26db7214f2205bccdb4b9306256 upstream. The current definition is wrong. This breaks my upcoming Aspeed virtual hub driver. Signed-off-by: Benjamin Herrenschmidt Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman Signed-off-by: Ben Hutchings

USB: hub: fix SS max number of ports

2017-09-15T17:30:43+00:00

commit 93491ced3c87c94b12220dbac0527e1356702179 upstream. Add define for the maximum number of ports on a SuperSpeed hub as per USB 3.1 spec Table 10-5, and use it when verifying the retrieved hub descriptor. This specifically avoids benign attempts to update the DeviceRemovable mask for non-existing ports (should we get that far). Fixes: dbe79bbe9dcb ("USB 3.0 Hub Changes") Acked-by: Alan Stern Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman [bwh: Backported to 3.2: - Add maxchild variable in hub_configure(), which was added separately upstream - Adjust filename] Signed-off-by: Ben Hutchings

usb-core: Add LINEAR_FRAME_INTR_BINTERVAL USB quirk

2017-07-18T17:38:33+00:00

commit 3243367b209faed5c320a4e5f9a565ee2a2ba958 upstream. Some USB 2.0 devices erroneously report millisecond values in bInterval. The generic config code manages to catch most of them, but in some cases it's not completely enough. The case at stake here is a USB 2.0 braille device, which wants to announce 10ms and thus sets bInterval to 10, but with the USB 2.0 computation that yields to 64ms. It happens that one can type fast enough to reach this interval and get the device buffers overflown, leading to problematic latencies. The generic config code does not catch this case because the 64ms is considered a sane enough value. This change thus adds a USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL quirk to mark devices which actually report milliseconds in bInterval, and marks Vario Ultra devices as needing it. Signed-off-by: Samuel Thibault Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman Signed-off-by: Ben Hutchings

USB: add flag for HCDs that can't receive wakeup requests (isp1760-hcd)

2015-05-09T22:16:14+00:00

commit 074f9dd55f9cab1b82690ed7e44bcf38b9616ce0 upstream. Currently the USB stack assumes that all host controller drivers are capable of receiving wakeup requests from downstream devices. However, this isn't true for the isp1760-hcd driver, which means that it isn't safe to do a runtime suspend of any device attached to a root-hub port if the device requires wakeup. This patch adds a "cant_recv_wakeups" flag to the usb_hcd structure and sets the flag in isp1760-hcd. The core is modified to prevent a direct child of the root hub from being put into runtime suspend with wakeup enabled if the flag is set. Signed-off-by: Alan Stern Tested-by: Nicolas Pitre Signed-off-by: Greg Kroah-Hartman [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings

usb: core: buffer: smallest buffer should start at ARCH_DMA_MINALIGN

2015-05-09T22:16:12+00:00

commit 5efd2ea8c9f4f12916ffc8ba636792ce052f6911 upstream. the following error pops up during "testusb -a -t 10" | musb-hdrc musb-hdrc.1.auto: dma_pool_free buffer-128, f134e000/be842000 (bad dma) hcd_buffer_create() creates a few buffers, the smallest has 32 bytes of size. ARCH_KMALLOC_MINALIGN is set to 64 bytes. This combo results in hcd_buffer_alloc() returning memory which is 32 bytes aligned and it might by identified by buffer_offset() as another buffer. This means the buffer which is on a 32 byte boundary will not get freed, instead it tries to free another buffer with the error message. This patch fixes the issue by creating the smallest DMA buffer with the size of ARCH_KMALLOC_MINALIGN (or 32 in case ARCH_KMALLOC_MINALIGN is smaller). This might be 32, 64 or even 128 bytes. The next three pools will have the size 128, 512 and 2048. In case the smallest pool is 128 bytes then we have only three pools instead of four (and zero the first entry in the array). The last pool size is always 2048 bytes which is the assumed PAGE_SIZE / 2 of 4096. I doubt it makes sense to continue using PAGE_SIZE / 2 where we would end up with 8KiB buffer in case we have 16KiB pages. Instead I think it makes sense to have a common size(s) and extend them if there is need to. There is a BUILD_BUG_ON() now in case someone has a minalign of more than 128 bytes. Signed-off-by: Sebastian Andrzej Siewior Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman Signed-off-by: Ben Hutchings

usb-core bInterval quirk

2015-02-20T00:49:39+00:00

commit cd83ce9e6195aa3ea15ab4db92892802c20df5d0 upstream. This patch adds a usb quirk to support devices with interupt endpoints and bInterval values expressed as microframes. The quirk causes the parse endpoint function to modify the reported bInterval to a standards conforming value. There is currently code in the endpoint parser that checks for bIntervals that are outside of the valid range (1-16 for USB 2+ high speed and super speed interupt endpoints). In this case, the code assumes the bInterval is being reported in 1ms frames. As well, the correction is only applied if the original bInterval value is out of the 1-16 range. With this quirk applied to the device, the bInterval will be accurately adjusted from microframes to an exponent. Signed-off-by: James P Michels III Signed-off-by: Greg Kroah-Hartman Signed-off-by: Ben Hutchings

USB: Add device quirk for ASUS T100 Base Station keyboard

2014-12-14T16:23:43+00:00

commit ddbe1fca0bcb87ca8c199ea873a456ca8a948567 upstream. This full-speed USB device generates spurious remote wakeup event as soon as USB_DEVICE_REMOTE_WAKEUP feature is set. As the result, Linux can't enter system suspend and S0ix power saving modes once this keyboard is used. This patch tries to introduce USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk. With this quirk set, wakeup capability will be ignored during device configure. This patch could be back-ported to kernels as old as 2.6.39. Signed-off-by: Lu Baolu Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman Signed-off-by: Ben Hutchings

USB: fix build error when CONFIG_PM_SLEEP isn't enabled

2013-10-26T20:06:00+00:00

commit 9d8924297cd9c256c23c02abae40202563452453 upstream. This patch fixes a build error that occurs when CONFIG_PM is enabled and CONFIG_PM_SLEEP isn't: >> drivers/usb/host/ohci-pci.c:294:10: error: 'usb_hcd_pci_pm_ops' undeclared here (not in a function) .pm = &usb_hcd_pci_pm_ops Since the usb_hcd_pci_pm_ops structure is defined and used when CONFIG_PM is enabled, its declaration should not be protected by CONFIG_PM_SLEEP. Signed-off-by: Alan Stern Reported-by: kbuild test robot Signed-off-by: Greg Kroah-Hartman Signed-off-by: Ben Hutchings

USB: serial: add modem-status-change wait queue

2013-04-25T19:22:10+00:00

commit e5b33dc9d16053c2ae4c2c669cf008829530364b upstream. Add modem-status-change wait queue to struct usb_serial_port that subdrivers can use to implement TIOCMIWAIT. Currently subdrivers use a private wait queue which may have been released when waking up after device disconnected. Note that we're adding a new wait queue rather than reusing the tty-port one as we do not want to get woken up at hangup (yet). Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman Signed-off-by: Ben Hutchings