kernel/linux.git/include/linux/usb, branch v3.2.15

USB: Remove duplicate USB 3.0 hub feature #defines.

2012-03-01T00:31:06+00:00

commit d9f5343e35d9138432657202afa8e3ddb2ade360 upstream. Somehow we ended up with duplicate hub feature #defines in ch11.h. Tatyana Brokhman first created the USB 3.0 hub feature macros in 2.6.38 with commit 0eadcc09203349b11ca477ec367079b23d32ab91 "usb: USB3.0 ch11 definitions". In 2.6.39, I modified a patch from John Youn that added similar macros in a different place in the same file, and committed dbe79bbe9dcb22cb3651c46f18943477141ca452 "USB 3.0 Hub Changes". Some of the #defines used different names for the same values. Others used exactly the same names with the same values, like these gems: #define USB_PORT_FEAT_BH_PORT_RESET 28 ... #define USB_PORT_FEAT_BH_PORT_RESET 28 According to my very geeky husband (who looked it up in the C99 spec), it is allowed to have object-like macros with duplicate names as long as the replacement list is exactly the same. However, he recalled that some compilers will give warnings when they find duplicate macros. It's probably best to remove the duplicates in the stable tree, so that the code compiles for everyone. The macros are now fixed to move the feature requests that are specific to USB 3.0 hubs into a new section (out of the USB 2.0 hub feature section), and use the most common macro name. This patch should be backported to 2.6.39. Signed-off-by: Sarah Sharp Cc: Tatyana Brokhman Cc: John Youn Cc: Jamey Sharp Signed-off-by: Greg Kroah-Hartman

usb: ch9.h: usb_endpoint_maxp() uses __le16_to_cpu()

2012-02-13T19:17:03+00:00

commit 9c0a835a9d9aed41bcf9c287f5069133a6e2a87b upstream. The usb/ch9.h will be installed to /usr/include/linux, and be used from user space. But le16_to_cpu() is only defined for kernel code. Without this patch, user space compile will be broken. Special thanks to Stefan Becker Reported-by: Stefan Becker Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: ch9: fix up MaxStreams helper

2012-01-12T19:29:43+00:00

commit 18b7ede5f7ee2092aedcb578d3ac30bd5d4fc23c upstream. [ removed the dwc3 portion of the patch as it didn't apply to older kernels - gregkh] According to USB 3.0 Specification Table 9-22, if bmAttributes [4:0] are set to zero, it means "no streams supported", but the way this helper was defined on Linux, we will *always* have one stream which might cause several problems. For example on DWC3, we would tell the controller endpoint has streams enabled and yet start transfers with Stream ID set to 0, which would goof up the host side. While doing that, convert the macro to an inline function due to the different checks we now need. Signed-off-by: Felipe Balbi Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman

Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

2011-10-31T22:42:54+00:00

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (348 commits) [media] pctv452e: Remove bogus code [media] adv7175: Make use of media bus pixel codes [media] media: vb2: fix incorrect return value [media] em28xx: implement VIDIOC_ENUM_FRAMESIZES [media] cx23885: Stop the risc video fifo before reconfiguring it [media] cx23885: Avoid incorrect error handling and reporting [media] cx23885: Avoid stopping the risc engine during buffer timeout [media] cx23885: Removed a spurious function cx23885_set_scale() [media] cx23885: v4l2 api compliance, set the audioset field correctly [media] cx23885: hook the audio selection functions into the main driver [media] cx23885: add generic functions for dealing with audio input selection [media] cx23885: fixes related to maximum number of inputs and range checking [media] cx23885: Initial support for the MPX-885 mini-card [media] cx25840: Ensure AUDIO6 and AUDIO7 trigger line-in baseband use [media] cx23885: Enable audio line in support from the back panel [media] cx23885: Allow the audio mux config to be specified on a per input basis [media] cx25840: Enable support for non-tuner LR1/LR2 audio inputs [media] cx23885: Name an internal i2c part and declare a bitfield by name [media] cx23885: Ensure VBI buffers timeout quickly - bugfix for vbi hangs during streaming [media] cx23885: remove channel dump diagnostics when a vbi buffer times out ... Fix up trivial conflicts in drivers/misc/altera-stapl/altera.c (header file rename vs add)

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

2011-10-28T21:25:01+00:00

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (549 commits) ALSA: hda - Fix ADC input-amp handling for Cx20549 codec ALSA: hda - Keep EAPD turned on for old Conexant chips ALSA: hda/realtek - Fix missing volume controls with ALC260 ASoC: wm8940: Properly set codec->dapm.bias_level ALSA: hda - Fix pin-config for ASUS W90V ALSA: hda - Fix surround/CLFE headphone and speaker pins order ALSA: hda - Fix typo ALSA: Update the sound git tree URL ALSA: HDA: Add new revision for ALC662 ASoC: max98095: Convert codec->hw_write to snd_soc_write ASoC: keep pointer to resource so it can be freed ASoC: sgtl5000: Fix wrong mask in some snd_soc_update_bits calls ASoC: wm8996: Fix wrong mask for setting WM8996_AIF_CLOCKING_2 ASoC: da7210: Add support for line out and DAC ASoC: da7210: Add support for DAPM ALSA: hda/realtek - Fix DAC assignments of multiple speakers ASoC: Use SGTL5000_LINREG_VDDD_MASK instead of hardcoded mask value ASoC: Set sgtl5000->ldo in ldo_regulator_register ASoC: wm8996: Use SND_SOC_DAPM_AIF_OUT for AIF2 Capture ASoC: wm8994: Use SND_SOC_DAPM_AIF_OUT for AIF3 Capture ...

usb: gadget: renesas_usbhs: support otg pin control

2011-10-13T17:41:47+00:00

some renesas_usbhs device is supporting OTG external device interface. In that device, it is necessary to control PWEN/EXTLP on DVSTCTR. This patch support it. But renesas_usbhs driver doesn't have OTG support for now. Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi

usb: gadget: renesas_usbhs: add bus control functions

2011-10-13T17:41:38+00:00

this patch add DVSTCTR control function for HOST support Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi

usb: gadget: renesas_usbhs: change usbhsc_bus_ctrl() to usbsc_set_buswait()

2011-10-13T17:41:37+00:00

renesas_usbhs will have register DVSTCTR control function for HOST support. This patch changes usbhsc_bus_ctrl() to usbsc_set_buswait(), to remove DVSTCTR access from it, Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi

usb: gadget: fix typo for default U1/U2 exit latencies

2011-10-13T17:39:59+00:00

s/DEFULT/DEFAULT/, no functional changes. Signed-off-by: Felipe Balbi

usb: gadget: r8a66597-udc: add support for SUDMAC

2011-10-13T17:38:39+00:00

SH7757 has a USB function with internal DMA controller (SUDMAC). This patch supports the SUDMAC. The SUDMAC is incompatible with general-purpose DMAC. So, it doesn't use dmaengine. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Felipe Balbi