kernel/linux.git/include/linux/usb, branch v2.6.38

Merge branch 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

2011-02-10T20:20:40+00:00

* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (21 commits) USB: cdc-acm: Adding second ACM channel support for Nokia N8 USB, Mass Storage, composite, gadget: Fix build failure and memset of a struct USB: Fix trout build failure with ci13xxx_msm gadget USB: EHCI: fix scheduling while atomic during suspend USB: usb-storage: unusual_devs entry for Coby MP3 player USB: ftdi_sio: Add VID=0x0647, PID=0x0100 for Acton Research spectrograph USB: fix race between root-hub resume and wakeup requests USB: prevent buggy hubs from crashing the USB stack usb: r8a66597-udc: Fixed bufnum of Bulk USB: ftdi_sio: add ST Micro Connect Lite uart support USB: Storage: Add unusual_devs entry for VTech Kidizoom USB SL811HS HCD: Fix memory leak in sl811h_urb_enqueue() USB: ti_usb: fix module removal USB: io_edgeport: fix the reported firmware major and minor usb: ehci-omap: Show fatal probing time errors to end user usb: musb: introduce api for dma code to check compatibility with usb request usb: musb: maintain three states for buffer mappings instead of two usb: musb: disable double buffering when it's broken usb: musb: hsdma: change back to use musb_read/writew usb: musb: core: fix IRQ check ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

2011-02-10T20:05:09+00:00

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (34 commits) virtio_net: Add schedule check to napi_enable call x25: Do not reference freed memory. pch_can: fix tseg1/tseg2 setting issue isdn: hysdn: Kill (partially buggy) CVS regision log reporting. can: softing_cs needs slab.h pch_gbe: Fix the issue which a driver locks when rx offload is set by ethtool netfilter: nf_conntrack: set conntrack templates again if we return NF_REPEAT pch_can: fix module reload issue with MSI pch_can: fix rmmod issue pch_can: fix 800k comms issue net: Fix lockdep regression caused by initializing netdev queues too early. net/caif: Fix dangling list pointer in freed object on error. USB CDC NCM errata updates for cdc_ncm host driver CDC NCM errata updates for cdc.h ixgbe: update version string ixgbe: cleanup variable initialization ixgbe: limit VF access to network traffic ixgbe: fix for 82599 erratum on Header Splitting ixgbe: fix variable set but not used warnings by gcc 4.6 e1000: add support for Marvell Alaska M88E1118R PHY ...

CDC NCM errata updates for cdc.h

2011-02-08T21:54:42+00:00

Changes are based on the following documents: - CDC NCM errata: http://www.usb.org/developers/devclass_docs/NCM10_012011.zip - CDC and WMC errata link: http://www.usb.org/developers/devclass_docs/CDC1.2_WMC1.1_012011.zip Signed-off-by: Alexey Orishko Acked-by: Greg Kroah-Hartman Signed-off-by: David S. Miller

USB: Fix trout build failure with ci13xxx_msm gadget

2011-02-04T20:38:14+00:00

This patch fixes the below compilation errors. CC drivers/usb/gadget/ci13xxx_msm.o CC net/mac80211/led.o drivers/usb/gadget/ci13xxx_msm.c: In function 'ci13xxx_msm_notify_event': drivers/usb/gadget/ci13xxx_msm.c:42: error: 'USB_AHBBURST' undeclared (first use in this function) drivers/usb/gadget/ci13xxx_msm.c:42: error: (Each undeclared identifier is reported only once drivers/usb/gadget/ci13xxx_msm.c:42: error: for each function it appears in.) drivers/usb/gadget/ci13xxx_msm.c:43: error: 'USB_AHBMODE' undeclared (first use in this function) make[4]: *** [drivers/usb/gadget/ci13xxx_msm.o] Error 1 make[3]: *** [drivers/usb/gadget] Error 2 MSM USB driver is not supported on boards like trout (MSM7201) which has an external PHY. Signed-off-by: Pavankumar Kondeti Signed-off-by: Greg Kroah-Hartman

Merge branch 'for-usb-linus' of master.kernel.org:/pub/scm/linux/kernel/git/sarah/xhci into usb-linus

2011-01-23T23:14:07+00:00

* 'for-usb-linus' of master.kernel.org:/pub/scm/linux/kernel/git/sarah/xhci: xhci: Remove more doorbell-related reads xHCI: fix printk_ratelimit() usage xHCI: replace dev_dbg() with xhci_dbg() xHCI: fix cycle bit set in giveback_first_trb() xHCI: remove redundant parameter in giveback_first_trb() xHCI: fix queue_trb in isoc transfer xhci: Use GFP_NOIO during device reset. usb: Realloc xHCI structures after a hub is verified. xhci: Do not run xhci_cleanup_msix with irq disabled xHCI: synchronize irq in xhci_suspend() xhci: Resume bus on any port status change.

USB: serial: handle Data Carrier Detect changes

2011-01-23T02:53:26+00:00

Alan's commit 335f8514f200e63d689113d29cb7253a5c282967 introduced .carrier_raised function in several drivers. That also means tty_port_block_til_ready can now suspend the process trying to open the serial port when Carrier Detect is low and put it into tty_port.open_wait queue. We need to wake up the process when Carrier Detect goes high and trigger TTY hangup when CD goes low. Some of the devices do not report modem status line changes, or at least we don't understand the status message, so for those we remove .carrier_raised again. Signed-off-by: Libor Pechacek Cc: stable Signed-off-by: Greg Kroah-Hartman

xHCI: synchronize irq in xhci_suspend()

2011-01-14T23:28:52+00:00

Synchronize the interrupts instead of free them in xhci_suspend(). This will prevent a double free when the host is suspended and then the card removed. Set the flag hcd->msix_enabled when using MSI-X, and check the flag in suspend_common(). MSI-X synchronization will be handled by xhci_suspend(), and MSI/INTx will be synchronized in suspend_common(). This patch should be queued for the 2.6.37 stable tree. Reported-by: Matthew Garrett Signed-off-by: Andiry Xu Signed-off-by: Sarah Sharp Cc: stable@kernel.org

Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

2011-01-07T21:16:28+00:00

* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (144 commits) USB: add support for Dream Cheeky DL100B Webmail Notifier (1d34:0004) USB: serial: ftdi_sio: add support for TIOCSERGETLSR USB: ehci-mxc: Setup portsc register prior to accessing OTG viewport USB: atmel_usba_udc: fix freeing irq in usba_udc_remove() usb: ehci-omap: fix tll channel enable mask usb: ohci-omap3: fix trivial typo USB: gadget: ci13xxx: don't assume that PAGE_SIZE is 4096 USB: gadget: ci13xxx: fix complete() callback for no_interrupt rq's USB: gadget: update ci13xxx to work with g_ether USB: gadgets: ci13xxx: fix probing of compiled-in gadget drivers Revert "USB: musb: pm: don't rely fully on clock support" Revert "USB: musb: blackfin: pm: make it work" USB: uas: Use GFP_NOIO instead of GFP_KERNEL in I/O submission path USB: uas: Ensure we only bind to a UAS interface USB: uas: Rename sense pipe and sense urb to status pipe and status urb USB: uas: Use kzalloc instead of kmalloc USB: uas: Fix up the Sense IU usb: musb: core: kill unneeded #include's DA8xx: assign name to MUSB IRQ resource usb: gadget: g_ncm added ... Manually fix up trivial conflicts in USB Kconfig changes in: arch/arm/mach-omap2/Kconfig arch/sh/Kconfig drivers/usb/Kconfig drivers/usb/host/ehci-hcd.c and annoying chip clock data conflicts in: arch/arm/mach-omap2/clock3xxx_data.c arch/arm/mach-omap2/clock44xx_data.c

Merge branch 'usb-next' into musb-merge

2010-12-16T18:05:06+00:00

* usb-next: (132 commits) USB: uas: Use GFP_NOIO instead of GFP_KERNEL in I/O submission path USB: uas: Ensure we only bind to a UAS interface USB: uas: Rename sense pipe and sense urb to status pipe and status urb USB: uas: Use kzalloc instead of kmalloc USB: uas: Fix up the Sense IU usb: musb: core: kill unneeded #include's DA8xx: assign name to MUSB IRQ resource usb: gadget: g_ncm added usb: gadget: f_ncm.c added usb: gadget: u_ether: prepare for NCM usb: pch_udc: Fix setup transfers with data out usb: pch_udc: Fix compile error, warnings and checkpatch warnings usb: add ab8500 usb transceiver driver USB: gadget: Implement runtime PM for MSM bus glue driver USB: gadget: Implement runtime PM for ci13xxx gadget USB: gadget: Add USB controller driver for MSM SoC USB: gadget: Introduce ci13xxx_udc_driver struct USB: gadget: Initialize ci13xxx gadget device's coherent DMA mask USB: gadget: Fix "scheduling while atomic" bugs in ci13xxx_udc USB: gadget: Separate out PCI bus code from ci13xxx_udc ...

Merge branch 'musb-hw' of git://gitorious.org/usb/usb into musb

2010-12-15T17:29:38+00:00

* 'musb-hw' of git://gitorious.org/usb/usb: (43 commits) usb: musb: core: kill unneeded #include's DA8xx: assign name to MUSB IRQ resource arm: OMAP4430: musb: Configure musb to OTG mode usb: musb: Adding musb support for OMAP4430 usb: otg: TWL6030: Add twl6030_usb file for compilation mfd: TWL6030: OMAP4: Registering the TWL6030-usb device usb: musb: TWL6030: Selecting TWL6030_USB transceiver usb: otg: Kconfig: Add Kconfig option for TWL6030 transceiver. usb: otg: Adding twl6030-usb transceiver driver for OMAP4430 mfd: TWL6030: USBOTG VBUS event generation on usb: musb: add support for ux500 platform musb: am35x: fix compile error due to control apis arm: omap4: enable usb on 4430sdp usb: musb: drop board_set_vbus usb: musb: drop musb_platform_suspend/resume usb: musb: blackfin: usb dev_pm_ops structure usb: musb: am35x: usb dev_pm_ops structure usb: musb: omap2430: use dev_pm_ops structure usb: musb: omap2430: drop the nops usb: musb: mark musb_save/restore_context static ...