kernel/linux.git/include/linux/usb, branch linux-5.11.y

net: usb: cdc_ncm: don't spew notifications

2021-01-20T17:01:55+00:00

RTL8156 sends notifications about every 32ms. Only display/log notifications when something changes. This issue has been reported by others: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1832472 https://lkml.org/lkml/2020/8/27/1083 ... [785962.779840] usb 1-1: new high-speed USB device number 5 using xhci_hcd [785962.929944] usb 1-1: New USB device found, idVendor=0bda, idProduct=8156, bcdDevice=30.00 [785962.929949] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [785962.929952] usb 1-1: Product: USB 10/100/1G/2.5G LAN [785962.929954] usb 1-1: Manufacturer: Realtek [785962.929956] usb 1-1: SerialNumber: 000000001 [785962.991755] usbcore: registered new interface driver cdc_ether [785963.017068] cdc_ncm 1-1:2.0: MAC-Address: 00:24:27:88:08:15 [785963.017072] cdc_ncm 1-1:2.0: setting rx_max = 16384 [785963.017169] cdc_ncm 1-1:2.0: setting tx_max = 16384 [785963.017682] cdc_ncm 1-1:2.0 usb0: register 'cdc_ncm' at usb-0000:00:14.0-1, CDC NCM, 00:24:27:88:08:15 [785963.019211] usbcore: registered new interface driver cdc_ncm [785963.023856] usbcore: registered new interface driver cdc_wdm [785963.025461] usbcore: registered new interface driver cdc_mbim [785963.038824] cdc_ncm 1-1:2.0 enx002427880815: renamed from usb0 [785963.089586] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected [785963.121673] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected [785963.153682] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected ... This is about 2KB per second and will overwrite all contents of a 1MB dmesg buffer in under 10 minutes rendering them useless for debugging many kernel problems. This is also an extra 180 MB/day in /var/logs (or 1GB per week) rendering the majority of those logs useless too. When the link is up (expected state), spew amount is >2x higher: ... [786139.600992] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected [786139.632997] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink [786139.665097] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected [786139.697100] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink [786139.729094] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected [786139.761108] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink ... Chrome OS cannot support RTL8156 until this is fixed. Signed-off-by: Grant Grundler Reviewed-by: Hayes Wang Link: https://lore.kernel.org/r/20210120011208.3768105-1-grundler@chromium.org Signed-off-by: Jakub Kicinski

Merge tag 'usb-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2020-12-15T21:54:56+00:00

Pull USB / Thunderbolt updates from Greg KH: "Here is the big USB and thunderbolt pull request for 5.11-rc1. Nothing major in here, just the grind of constant development to support new hardware and fix old issues: - thunderbolt updates for new USB4 hardware - cdns3 major driver updates - lots of typec updates and additions as more hardware is available - usb serial driver updates and fixes - other tiny USB driver updates All have been in linux-next with no reported issues" * tag 'usb-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits) usb: phy: convert comma to semicolon usb: ucsi: convert comma to semicolon usb: typec: tcpm: convert comma to semicolon usb: typec: tcpm: Update vbus_vsafe0v on init usb: typec: tcpci: Enable bleed discharge when auto discharge is enabled usb: typec: Add class for plug alt mode device USB: typec: tcpci: Add Bleed discharge to POWER_CONTROL definition USB: typec: tcpm: Add a 30ms room for tPSSourceOn in PR_SWAP USB: typec: tcpm: Fix PR_SWAP error handling USB: typec: tcpm: Hard Reset after not receiving a Request USB: gadget: f_fs: remove likely/unlikely usb: gadget: f_fs: Re-use SS descriptors for SuperSpeedPlus USB: gadget: f_midi: setup SuperSpeed Plus descriptors USB: gadget: f_acm: add support for SuperSpeed Plus USB: gadget: f_rndis: fix bitrate for SuperSpeed and above usb: typec: intel_pmc_mux: Configure cable generation value for USB4 MAINTAINERS: Add myself as a reviewer for CADENCE USB3 DRD IP DRIVER usb: chipidea: ci_hdrc_imx: Use of_device_get_match_data() usb: chipidea: usbmisc_imx: Use of_device_get_match_data() usb: cdns3: fix NULL pointer dereference on no platform data ...

Merge tag 'usb-serial-5.11-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next

2020-12-11T15:16:52+00:00

Johan writes: USB-serial updates for 5.11-rc1 Here are the USB-serial updates for 5.11-rc1, including: - keyspan_pda write-implementation fixes - digi_acceleport write-wakeup fix - mos7720 parport-restore fix - mos7720 parport-tasklet removal - cp210x termios-handling cleanups - option device-flag fix - ftdi_sio GPIO CBUS-configuration improvements - removal of in_interrupt() uses Included are also various clean ups. All have been in linux-next with no reported issues. * tag 'usb-serial-5.11-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: (30 commits) USB: serial: ftdi_sio: log the CBUS GPIO validity USB: serial: ftdi_sio: drop GPIO line checking dead code USB: serial: ftdi_sio: report the valid GPIO lines to gpiolib USB: serial: option: add interface-number sanity check to flag handling USB: serial: cp210x: clean up dtr_rts() USB: serial: cp210x: refactor flow-control handling USB: serial: cp210x: drop flow-control debugging USB: serial: cp210x: set terminal settings on open USB: serial: cp210x: clean up line-control handling USB: serial: cp210x: return early on unchanged termios USB: serial: mos7720: defer state restore to a workqueue USB: serial: mos7720: fix parallel-port state restore USB: serial: remove write wait queue USB: serial: digi_acceleport: fix write-wakeup deadlocks USB: serial: keyspan_pda: drop redundant usb-serial pointer USB: serial: keyspan_pda: use BIT() macro USB: serial: keyspan_pda: clean up comments and whitespace USB: serial: keyspan_pda: clean up xircom/entrega support USB: serial: keyspan_pda: add write-fifo support USB: serial: keyspan_pda: increase transmitter threshold ...

USB: typec: tcpm: Add a 30ms room for tPSSourceOn in PR_SWAP

2020-12-11T09:51:38+00:00

TCPM state machine needs 20-25ms to enter the ErrorRecovery state after tPSSourceOn timer timeouts. Change the timer from max 480ms to 450ms to ensure that the timer complies with the Spec. In order to keep the flexibility for other usecases using tPSSourceOn, add another timer only for PR_SWAP. Cc: Guenter Roeck Cc: Heikki Krogerus Cc: Badhri Jagan Sridharan Reviewed-by: Guenter Roeck Acked-by: Heikki Krogerus Signed-off-by: Kyle Tso Signed-off-by: Will McVicker Signed-off-by: Greg Kroah-Hartman Link: https://lore.kernel.org/r/20201210160521.3417426-5-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: Introduce vsafe0v for vbus

2020-12-09T13:49:54+00:00

TCPM at present lacks the notion of VSAFE0V. There are three vbus threshold levels that are critical to track: a. vSafe5V - VBUS “5 volts” as defined by the USB PD specification. b. vSinkDisconnect - Threshold used for transition from Attached.SNK to Unattached.SNK. c. vSafe0V - VBUS “0 volts” as defined by the USB PD specification. Tracking vSafe0V is crucial for entry into Try.SNK and Attached.SRC and turning vbus back on by the source in response to hard reset. >From "4.5.2.2.8.2 Exiting from AttachWait.SRC State" section in the Type-C spec: "The port shall transition to Attached.SRC when VBUS is at vSafe0V and the SRC.Rd state is detected on exactly one of the CC1 or CC2 pins for at least tCCDebounce." "A DRP that strongly prefers the Sink role may optionally transition to Try.SNK instead of Attached.SRC when VBUS is at vSafe0V and the SRC.Rd state is detected on exactly one of the CC1 or CC2 pins for at least tCCDebounce." >From "7.1.5 Response to Hard Resets" section in the PD spec: "After establishing the vSafe0V voltage condition on VBUS, the Source Shall wait tSrcRecover before re-applying VCONN and restoring VBUS to vSafe5V." vbus_present in the TCPM code tracks vSafe5V(vbus_present is true) and vSinkDisconnect(vbus_present is false). This change adds is_vbus_vsafe0v callback which when set makes TCPM query for vSafe0V voltage level when needed. Since not all TCPC controllers might have the capability to report vSafe0V, TCPM assumes that vSafe0V is same as vSinkDisconnect when is_vbus_vsafe0v callback is not set. This allows TCPM to continue to support controllers which don't have the support for reporting vSafe0V. Introducing vSafe0V helps fix the failure reported at "Step 15. CVS verifies PUT remains in AttachWait.SRC for 500ms" of "TD 4.7.2 Try. SNK DRP Connect DRP Test" of "Universal Serial Bus Type-C (USB Type-C) Functional Test Specification Chapters 4 and 5". Here the compliance tester intentionally maintains vbus at greater than vSafe0V and expects the Product under test to stay in AttachWait.SRC till vbus drops to vSafe0V. Reviewed-by: Guenter Roeck Acked-by: Heikki Krogerus Signed-off-by: Badhri Jagan Sridharan Link: https://lore.kernel.org/r/20201202040840.663578-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: Pass down negotiated rev to update retry count

2020-12-09T13:42:10+00:00

nRetryCount was updated from 3 to 2 between PD2.0 and PD3.0 spec. nRetryCount in "Table 6-34 Counter parameters" of the PD 2.0 spec is set to 3, whereas, nRetryCount in "Table 6-59 Counter parameters" is set to 2. Pass down negotiated rev in pd_transmit so that low level chip drivers can update the retry count accordingly before attempting packet transmission. This helps in passing "TEST.PD.PORT.ALL.02" of the "Power Delivery Merged" test suite which was initially failing with "The UUT did not retransmit the message nReryCount times" In fusb302 & tcpci drivers, by default the driver sets the retry count to 3 (Default for PD 2.0). Update this to 2, if the negotiated rev is PD 3.0. In wcove, since the retry count is intentionally set to max, leaving it as is. Reviewed-by: Guenter Roeck Acked-by: Heikki Krogerus Signed-off-by: Badhri Jagan Sridharan Link: https://lore.kernel.org/r/20201202031733.647808-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: Stay in SNK_TRY_WAIT_DEBOUNCE_CHECK_VBUS till Rp is seen

2020-11-26T12:40:38+00:00

TD.4.7.3. Try SNK DRP Connect Try.SRC DRP fails. The compliance tester mimics being a Try.SRC USB-C port. The failure is due to TCPM exiting SNK_TRY_WAIT_DEBOUNCE_CHECK_VBUS when VBUS is not present eventhough when SNK.Rp is seen. Exit to SRC_TRYWAIT from SNK_TRY_WAIT_DEBOUNCE_CHECK_VBUS only when SNK.Rp is not seen for PD_T_TRY_CC_DEBOUNCE. >From the spec: The port shall then transition to Attached.SNK when the SNK.Rp state is detected on exactly one of the CC1 or CC2 pins for at least tTryCCDebounce and VBUS is detected. Alternatively, the port shall transition to TryWait.SRC if SNK.Rp state is not detected for tTryCCDebounce. Reviewed-by: Guenter Roeck Signed-off-by: Badhri Jagan Sridharan Link: https://lore.kernel.org/r/20201125014804.1596719-1-badhri@google.com Acked-by: Heikki Krogerus Signed-off-by: Greg Kroah-Hartman

usb: pd: DFP product types

2020-11-26T08:18:56+00:00

USB Power Delivery Specification R3.0 introduced separate field for the DFP product type to the ID Header VDO. Signed-off-by: Heikki Krogerus Link: https://lore.kernel.org/r/20201125120642.37156-2-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: typec: Add plug num_altmodes sysfs attr

2020-11-18T12:15:58+00:00

Add a field to the typec_plug struct to record the number of available altmodes as well as the corresponding sysfs attribute to expose this to userspace. This allows userspace to determine whether there are any remaining alternate modes left to be registered by the kernel driver. It can begin executing any policy state machine after all available alternate modes have been registered with the connector class framework. This value is set to "-1" initially, signifying that a valid number of alternate modes haven't been set for the plug. The sysfs file remains hidden as long as the attribute value is -1. We re-use the partner attribute for number_of_alternate_modes since the usage and name is similar, and update the corresponding *_show() command to support both partner and plugs. Signed-off-by: Prashant Malani Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20201116201150.2919178-4-pmalani@chromium.org Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: Implement enabling Auto Discharge disconnect support

2020-11-18T11:57:49+00:00

TCPCI spec allows TCPC hardware to autonomously discharge the vbus capacitance upon disconnect. The expectation is that the TCPM enables AutoDischargeDisconnect while entering SNK/SRC_ATTACHED states. Hardware then automously discharges vbus when the vbus falls below a certain threshold i.e. VBUS_SINK_DISCONNECT_THRESHOLD. Apart from enabling the vbus discharge circuit, AutoDischargeDisconnect is also used a flag to move TCPCI based TCPC implementations into Attached.Snk/Attached.Src state as mentioned in Figure 4-15. TCPC State Diagram before a Connection of the USB Type-C Port Controller Interface Specification. In such TCPC implementations, setting AutoDischargeDisconnect would prevent TCPC into entering "Connection_Invalid" state as well. Signed-off-by: Badhri Jagan Sridharan Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20201029063138.1429760-8-badhri@google.com Signed-off-by: Greg Kroah-Hartman