kernel/linux.git/include/linux/usb/pd.h, branch v6.6.132

usb: typec: Separate USB Power Delivery from USB Type-C

2022-06-12T04:49:47+00:00

Introducing a small device class for USB Power Delivery. The idea with it is that we do not mix any more USB Power Delivery information into the USB Type-C connectors only. This separation will make it possible to register USB Power Delivery devices also from other places, for example from USB Type-C Bridges (see USB Type-C Bridge Specification). The device class will not always deal with only the messages and objects that were negotiated with the partner, but instead messages and objects that can be used in the negotiation. That allows the USB PD devices to be shared and reconfigured. The ports can decide which objects are to be advertised to the partner before the contract is negotiated. It is also possible to allow the user space to make that decision if needed. Signed-off-by: Heikki Krogerus Link: https://lore.kernel.org/r/20220502132058.86236-2-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: pd: Set PD_T_SINK_WAIT_CAP to 310ms

2021-06-02T14:59:29+00:00

Current timer PD_T_SINK_WAIT_CAP is set to 240ms which will violate the SinkWaitCapTimer (tTypeCSinkWaitCap 310 - 620 ms) defined in the PD Spec if the port is faster enough when running the state machine. Set it to the lower bound 310ms to ensure the timeout is in Spec. Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)") Cc: stable Reviewed-by: Guenter Roeck Signed-off-by: Kyle Tso Link: https://lore.kernel.org/r/20210528081613.730661-1-kyletso@google.com Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: Honour pSnkStdby requirement during negotiation

2021-04-14T14:27:29+00:00

>From PD Spec: The Sink Shall transition to Sink Standby before a positive or negative voltage transition of VBUS. During Sink Standby the Sink Shall reduce its power draw to pSnkStdby. This allows the Source to manage the voltage transition as well as supply sufficient operating current to the Sink to maintain PD operation during the transition. The Sink Shall complete this transition to Sink Standby within tSnkStdby after evaluating the Accept Message from the Source. The transition when returning to Sink operation from Sink Standby Shall be completed within tSnkNewPower. The pSnkStdby requirement Shall only apply if the Sink power draw is higher than this level. The above requirement needs to be met to prevent hard resets from port partner. Without the patch: (5V/3A during SNK_DISCOVERY all the way through explicit contract) [ 95.711984] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected] [ 95.712007] state change TOGGLING -> SNK_ATTACH_WAIT [rev3 NONE_AMS] [ 95.712017] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS] [ 95.837190] VBUS on [ 95.882075] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms] [ 95.882082] state change SNK_DEBOUNCED -> SNK_ATTACHED [rev3 NONE_AMS] [ 95.882086] polarity 1 [ 95.883151] set_auto_vbus_discharge_threshold mode:0 pps_active:n vbus:5000 ret:0 [ 95.883441] enable vbus discharge ret:0 [ 95.883445] Requesting mux state 1, usb-role 2, orientation 2 [ 95.883776] state change SNK_ATTACHED -> SNK_STARTUP [rev3 NONE_AMS] [ 95.883879] pending state change SNK_STARTUP -> SNK_DISCOVERY @ 500 ms [rev3 NONE_AMS] [ 96.038960] VBUS on [ 96.383939] state change SNK_STARTUP -> SNK_DISCOVERY [delayed 500 ms] [ 96.383946] Setting voltage/current limit 5000 mV 3000 mA [ 96.383961] vbus=0 charge:=1 [ 96.386044] state change SNK_DISCOVERY -> SNK_WAIT_CAPABILITIES [rev3 NONE_AMS] [ 96.386309] pending state change SNK_WAIT_CAPABILITIES -> HARD_RESET_SEND @ 450 ms [rev3 NONE_AMS] [ 96.394404] PD RX, header: 0x2161 [1] [ 96.394408] PDO 0: type 0, 5000 mV, 3000 mA [E] [ 96.394410] PDO 1: type 0, 9000 mV, 2000 mA [] [ 96.394412] state change SNK_WAIT_CAPABILITIES -> SNK_NEGOTIATE_CAPABILITIES [rev2 POWER_NEGOTIATION] [ 96.394416] Setting usb_comm capable false [ 96.395083] cc=0 cc1=0 cc2=5 vbus=0 vconn=sink polarity=1 [ 96.395089] Requesting PDO 1: 9000 mV, 2000 mA [ 96.395093] PD TX, header: 0x1042 [ 96.397404] PD TX complete, status: 0 [ 96.397424] pending state change SNK_NEGOTIATE_CAPABILITIES -> HARD_RESET_SEND @ 60 ms [rev2 POWER_NEGOTIATION] [ 96.400826] PD RX, header: 0x363 [1] [ 96.400829] state change SNK_NEGOTIATE_CAPABILITIES -> SNK_TRANSITION_SINK [rev2 POWER_NEGOTIATION] [ 96.400832] pending state change SNK_TRANSITION_SINK -> HARD_RESET_SEND @ 500 ms [rev2 POWER_NEGOTIATION] [ 96.577315] PD RX, header: 0x566 [1] [ 96.577321] Setting voltage/current limit 9000 mV 2000 mA [ 96.578363] set_auto_vbus_discharge_threshold mode:3 pps_active:n vbus:9000 ret:0 [ 96.578370] state change SNK_TRANSITION_SINK -> SNK_READY [rev2 POWER_NEGOTIATION] With the patch: [ 168.398573] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected] [ 168.398605] state change TOGGLING -> SNK_ATTACH_WAIT [rev3 NONE_AMS] [ 168.398619] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS] [ 168.522348] VBUS on [ 168.568676] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms] [ 168.568684] state change SNK_DEBOUNCED -> SNK_ATTACHED [rev3 NONE_AMS] [ 168.568688] polarity 1 [ 168.569867] set_auto_vbus_discharge_threshold mode:0 pps_active:n vbus:5000 ret:0 [ 168.570158] enable vbus discharge ret:0 [ 168.570161] Requesting mux state 1, usb-role 2, orientation 2 [ 168.570504] state change SNK_ATTACHED -> SNK_STARTUP [rev3 NONE_AMS] [ 168.570634] pending state change SNK_STARTUP -> SNK_DISCOVERY @ 500 ms [rev3 NONE_AMS] [ 169.070689] state change SNK_STARTUP -> SNK_DISCOVERY [delayed 500 ms] [ 169.070695] Setting voltage/current limit 5000 mV 3000 mA [ 169.070702] vbus=0 charge:=1 [ 169.072719] state change SNK_DISCOVERY -> SNK_WAIT_CAPABILITIES [rev3 NONE_AMS] [ 169.073145] pending state change SNK_WAIT_CAPABILITIES -> HARD_RESET_SEND @ 450 ms [rev3 NONE_AMS] [ 169.077162] PD RX, header: 0x2161 [1] [ 169.077172] PDO 0: type 0, 5000 mV, 3000 mA [E] [ 169.077178] PDO 1: type 0, 9000 mV, 2000 mA [] [ 169.077183] state change SNK_WAIT_CAPABILITIES -> SNK_NEGOTIATE_CAPABILITIES [rev2 POWER_NEGOTIATION] [ 169.077191] Setting usb_comm capable false [ 169.077753] cc=0 cc1=0 cc2=5 vbus=0 vconn=sink polarity=1 [ 169.077759] Requesting PDO 1: 9000 mV, 2000 mA [ 169.077762] PD TX, header: 0x1042 [ 169.079990] PD TX complete, status: 0 [ 169.080013] pending state change SNK_NEGOTIATE_CAPABILITIES -> HARD_RESET_SEND @ 60 ms [rev2 POWER_NEGOTIATION] [ 169.083183] VBUS on [ 169.084195] PD RX, header: 0x363 [1] [ 169.084200] state change SNK_NEGOTIATE_CAPABILITIES -> SNK_TRANSITION_SINK [rev2 POWER_NEGOTIATION] [ 169.084206] Setting standby current 5000 mV @ 500 mA [ 169.084209] Setting voltage/current limit 5000 mV 500 mA [ 169.084220] pending state change SNK_TRANSITION_SINK -> HARD_RESET_SEND @ 500 ms [rev2 POWER_NEGOTIATION] [ 169.260222] PD RX, header: 0x566 [1] [ 169.260227] Setting voltage/current limit 9000 mV 2000 mA [ 169.261315] set_auto_vbus_discharge_threshold mode:3 pps_active:n vbus:9000 ret:0 [ 169.261321] state change SNK_TRANSITION_SINK -> SNK_READY [rev2 POWER_NEGOTIATION] [ 169.261570] AMS POWER_NEGOTIATION finished Fixes: f0690a25a140b ("staging: typec: USB Type-C Port Manager (tcpm)") Reviewed-by: Guenter Roeck Reviewed-by: Heikki Krogerus Signed-off-by: Badhri Jagan Sridharan Link: https://lore.kernel.org/r/20210414024000.4175263-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: Create legacy PDOs for PD2 connection

2021-01-25T10:33:59+00:00

If the port partner is PD2, the PDOs of the local port should follow the format defined in PD2 Spec. Dynamically modify the pre-defined PD3 PDOs and transform them into PD2 format before sending them to the PD2 port partner. Reviewed-by: Guenter Roeck Signed-off-by: Kyle Tso Link: https://lore.kernel.org/r/20210115163311.391332-1-kyletso@google.com Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: Protocol Error handling

2021-01-21T11:23:32+00:00

PD3.0 Spec 6.8.1 describes how to handle Protocol Error. There are general rules defined in Table 6-61 which regulate incoming Message handling. If the incoming Message is unexpected, unsupported, or unrecognized, Protocol Error occurs. Follow the rules to handle these situations. Also consider PD2.0 connection (PD2.0 Spec Table 6-36) for backward compatibilities. To know the types of AMS in all the recipient's states, identify those AMS who are initiated by the port partner but not yet recorded in the current code. Besides, introduce a new state CHUNK_NOT_SUPP to delay the NOT_SUPPORTED message after receiving a chunked message. Tested-by: Hans de Goede Reviewed-by: Heikki Krogerus Signed-off-by: Kyle Tso Link: https://lore.kernel.org/r/20210114145053.1952756-3-kyletso@google.com Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: AMS and Collision Avoidance

2021-01-21T11:23:32+00:00

This patch provides the implementation of Collision Avoidance introduced in PD3.0. The start of each Atomic Message Sequence (AMS) initiated by the port will be denied if the current AMS is not interruptible. The Source port will set the CC to SinkTxNG if it is going to initiate an AMS, and SinkTxOk otherwise. Meanwhile, any AMS initiated by a Sink port will be denied in TCPM if the port partner (Source) sets SinkTxNG except for HARD_RESET and SOFT_RESET. Tested-by: Hans de Goede Reviewed-by: Heikki Krogerus Signed-off-by: Kyle Tso Link: https://lore.kernel.org/r/20210114145053.1952756-2-kyletso@google.com Signed-off-by: Greg Kroah-Hartman

USB: typec: tcpm: Add a 30ms room for tPSSourceOn in PR_SWAP

2020-12-11T09:51:38+00:00

TCPM state machine needs 20-25ms to enter the ErrorRecovery state after tPSSourceOn timer timeouts. Change the timer from max 480ms to 450ms to ensure that the timer complies with the Spec. In order to keep the flexibility for other usecases using tPSSourceOn, add another timer only for PR_SWAP. Cc: Guenter Roeck Cc: Heikki Krogerus Cc: Badhri Jagan Sridharan Reviewed-by: Guenter Roeck Acked-by: Heikki Krogerus Signed-off-by: Kyle Tso Signed-off-by: Will McVicker Signed-off-by: Greg Kroah-Hartman Link: https://lore.kernel.org/r/20201210160521.3417426-5-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: Stay in SNK_TRY_WAIT_DEBOUNCE_CHECK_VBUS till Rp is seen

2020-11-26T12:40:38+00:00

TD.4.7.3. Try SNK DRP Connect Try.SRC DRP fails. The compliance tester mimics being a Try.SRC USB-C port. The failure is due to TCPM exiting SNK_TRY_WAIT_DEBOUNCE_CHECK_VBUS when VBUS is not present eventhough when SNK.Rp is seen. Exit to SRC_TRYWAIT from SNK_TRY_WAIT_DEBOUNCE_CHECK_VBUS only when SNK.Rp is not seen for PD_T_TRY_CC_DEBOUNCE. >From the spec: The port shall then transition to Attached.SNK when the SNK.Rp state is detected on exactly one of the CC1 or CC2 pins for at least tTryCCDebounce and VBUS is detected. Alternatively, the port shall transition to TryWait.SRC if SNK.Rp state is not detected for tTryCCDebounce. Reviewed-by: Guenter Roeck Signed-off-by: Badhri Jagan Sridharan Link: https://lore.kernel.org/r/20201125014804.1596719-1-badhri@google.com Acked-by: Heikki Krogerus Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS)

2020-10-08T07:28:22+00:00

PD 3.0 spec defines a new mechanism for power role swap called Fast role swap. This change enables TCPM to support FRS when acting as sink. Once the explicit contract is negotiated, sink port is expected to query the source port for sink caps to determine whether the source is FRS capable. Bits 23 & 24 of fixed pdo of the sink caps from the source, when set, indicates the current needed by the source when fast role swap is in progress(Implicit contract phasae). 0 indicates that the source does not support Fast Role Swap. Upon receiving the FRS signal from the source, TCPC(TCPM_FRS_EVENT) informs TCPM to start the Fast role swap sequence. 1. TCPM sends FRS PD message: FR_SWAP_SEND 2. If response is not received within the expiry of SenderResponseTimer, Error recovery is triggered.: FR_SWAP_SEND_TIMEOUT 3. Upon receipt of the accept message, TCPM waits for PSSourceOffTimer for PS_READY message from the partner: FR_SWAP_SNK_SRC_NEW_SINK_READY. TCPC is expected to autonomously turn on vbus once the FRS signal is received and vbus voltage falls below vsafe5v within tSrcFrSwap. This is different from traditional power role swap where the vbus sourcing is turned on by TCPM. 4. By this time, TCPC most likely would have started to source vbus, TCPM waits for tSrcFrSwap to see if the lower level TCPC driver signals TCPM_SOURCING_VBUS event: FR_SWAP_SNK_SRC_SOURCE_VBUS_APPLIED. 5. When TCPC signals sourcing vbus, TCPM sends PS_READY msg and changes the CC pin from Rd to Rp. This is the end of fast role swap sequence and TCPM initiates the sequnce to negotiate explicit contract by transitioning into SRC_STARTUP after SwapSrcStart. The code is written based on the sequence described in "Figure 8-107: Dual-role Port in Sink to Source Fast Role Swap State Diagram" of USB Power Delivery Specification Revision 3.0, Version 1.2. Signed-off-by: Badhri Jagan Sridharan Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20201008061556.1402293-7-badhri@google.com Signed-off-by: Greg Kroah-Hartman

usb: typec: pd: Fix formatting in pd.h header

2020-08-28T07:49:42+00:00

Replacing spaces with tabs for PD_T_* constants. Signed-off-by: Badhri Jagan Sridharan Reviewed-by: Guenter Roeck Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20200817183828.1895015-2-badhri@google.com Signed-off-by: Greg Kroah-Hartman