kernel/linux.git/include/linux/usb/pd.h, branch linux-5.11.y

USB: typec: tcpm: Add a 30ms room for tPSSourceOn in PR_SWAP

2020-12-11T09:51:38+00:00

TCPM state machine needs 20-25ms to enter the ErrorRecovery state after tPSSourceOn timer timeouts. Change the timer from max 480ms to 450ms to ensure that the timer complies with the Spec. In order to keep the flexibility for other usecases using tPSSourceOn, add another timer only for PR_SWAP. Cc: Guenter Roeck Cc: Heikki Krogerus Cc: Badhri Jagan Sridharan Reviewed-by: Guenter Roeck Acked-by: Heikki Krogerus Signed-off-by: Kyle Tso Signed-off-by: Will McVicker Signed-off-by: Greg Kroah-Hartman Link: https://lore.kernel.org/r/20201210160521.3417426-5-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: Stay in SNK_TRY_WAIT_DEBOUNCE_CHECK_VBUS till Rp is seen

2020-11-26T12:40:38+00:00

TD.4.7.3. Try SNK DRP Connect Try.SRC DRP fails. The compliance tester mimics being a Try.SRC USB-C port. The failure is due to TCPM exiting SNK_TRY_WAIT_DEBOUNCE_CHECK_VBUS when VBUS is not present eventhough when SNK.Rp is seen. Exit to SRC_TRYWAIT from SNK_TRY_WAIT_DEBOUNCE_CHECK_VBUS only when SNK.Rp is not seen for PD_T_TRY_CC_DEBOUNCE. >From the spec: The port shall then transition to Attached.SNK when the SNK.Rp state is detected on exactly one of the CC1 or CC2 pins for at least tTryCCDebounce and VBUS is detected. Alternatively, the port shall transition to TryWait.SRC if SNK.Rp state is not detected for tTryCCDebounce. Reviewed-by: Guenter Roeck Signed-off-by: Badhri Jagan Sridharan Link: https://lore.kernel.org/r/20201125014804.1596719-1-badhri@google.com Acked-by: Heikki Krogerus Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS)

2020-10-08T07:28:22+00:00

PD 3.0 spec defines a new mechanism for power role swap called Fast role swap. This change enables TCPM to support FRS when acting as sink. Once the explicit contract is negotiated, sink port is expected to query the source port for sink caps to determine whether the source is FRS capable. Bits 23 & 24 of fixed pdo of the sink caps from the source, when set, indicates the current needed by the source when fast role swap is in progress(Implicit contract phasae). 0 indicates that the source does not support Fast Role Swap. Upon receiving the FRS signal from the source, TCPC(TCPM_FRS_EVENT) informs TCPM to start the Fast role swap sequence. 1. TCPM sends FRS PD message: FR_SWAP_SEND 2. If response is not received within the expiry of SenderResponseTimer, Error recovery is triggered.: FR_SWAP_SEND_TIMEOUT 3. Upon receipt of the accept message, TCPM waits for PSSourceOffTimer for PS_READY message from the partner: FR_SWAP_SNK_SRC_NEW_SINK_READY. TCPC is expected to autonomously turn on vbus once the FRS signal is received and vbus voltage falls below vsafe5v within tSrcFrSwap. This is different from traditional power role swap where the vbus sourcing is turned on by TCPM. 4. By this time, TCPC most likely would have started to source vbus, TCPM waits for tSrcFrSwap to see if the lower level TCPC driver signals TCPM_SOURCING_VBUS event: FR_SWAP_SNK_SRC_SOURCE_VBUS_APPLIED. 5. When TCPC signals sourcing vbus, TCPM sends PS_READY msg and changes the CC pin from Rd to Rp. This is the end of fast role swap sequence and TCPM initiates the sequnce to negotiate explicit contract by transitioning into SRC_STARTUP after SwapSrcStart. The code is written based on the sequence described in "Figure 8-107: Dual-role Port in Sink to Source Fast Role Swap State Diagram" of USB Power Delivery Specification Revision 3.0, Version 1.2. Signed-off-by: Badhri Jagan Sridharan Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20201008061556.1402293-7-badhri@google.com Signed-off-by: Greg Kroah-Hartman

usb: typec: pd: Fix formatting in pd.h header

2020-08-28T07:49:42+00:00

Replacing spaces with tabs for PD_T_* constants. Signed-off-by: Badhri Jagan Sridharan Reviewed-by: Guenter Roeck Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20200817183828.1895015-2-badhri@google.com Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: During PR_SWAP, source caps should be sent only after tSwapSourceStart

2020-08-28T07:49:30+00:00

The patch addresses the compliance test failures while running TD.PD.CP.E3, TD.PD.CP.E4, TD.PD.CP.E5 of the "Deterministic PD Compliance MOI" test plan published in https://www.usb.org/usbc. For a product to be Type-C compliant, it's expected that these tests are run on usb.org certified Type-C compliance tester as mentioned in https://www.usb.org/usbc. The purpose of the tests TD.PD.CP.E3, TD.PD.CP.E4, TD.PD.CP.E5 is to verify the PR_SWAP response of the device. While doing so, the test asserts that Source Capabilities message is NOT received from the test device within tSwapSourceStart min (20 ms) from the time the last bit of GoodCRC corresponding to the RS_RDY message sent by the UUT was sent. If it does then the test fails. This is in line with the requirements from the USB Power Delivery Specification Revision 3.0, Version 1.2: "6.6.8.1 SwapSourceStartTimer The SwapSourceStartTimer Shall be used by the new Source, after a Power Role Swap or Fast Role Swap, to ensure that it does not send Source_Capabilities Message before the new Sink is ready to receive the Source_Capabilities Message. The new Source Shall Not send the Source_Capabilities Message earlier than tSwapSourceStart after the last bit of the EOP of GoodCRC Message sent in response to the PS_RDY Message sent by the new Source indicating that its power supply is ready." The patch makes sure that TCPM does not send the Source_Capabilities Message within tSwapSourceStart(20ms) by transitioning into SRC_STARTUP only after tSwapSourceStart(20ms). Signed-off-by: Badhri Jagan Sridharan Reviewed-by: Guenter Roeck Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20200817183828.1895015-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: Stay in BIST mode till hardreset or unattached

2020-07-21T11:38:21+00:00

Port starts to toggle when transitioning to unattached state. This is incorrect while in BIST mode. 6.4.3.1 BIST Carrier Mode Upon receipt of a BIST Message, with a BIST Carrier Mode BIST Data Object, the UUT Shall send out a continuous string of BMC encoded alternating "1"s and “0”s. The UUT Shall exit the Continuous BIST Mode within tBISTContMode of this Continuous BIST Mode being enabled(see Section 6.6.7.2). 6.4.3.2 BIST Test Data Upon receipt of a BIST Message, with a BIST Test Data BIST Data Object, the UUT Shall return a GoodCRC Message and Shall enter a test mode in which it sends no further Messages except for GoodCRC Messages in response to received Messages. See Section 5.9.2 for the definition of the Test Data Frame. The test Shall be ended by sending Hard Reset Signaling to reset the UUT. Signed-off-by: Badhri Jagan Sridharan Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20200716034128.1251728-3-badhri@google.com Signed-off-by: Greg Kroah-Hartman

usb: pd: Add definitions for the Enter_USB message

2020-01-09T09:48:55+00:00

Version 2.0 of the USB Power Delivery Specification R3.0 defines a new message called Enter_USB, which is made with USB4 in mind. Enter_USB message is in practice the same as the Enter Mode command (used when entering alternate modes) that just needs to be used when entering USB4 mode. The message does also support entering USB 2.0 or USB 3.2 mode instead of USB4 mode, but it is only required with USB4. I.e. with USB2 and USB3 Enter_USB message is optional. Signed-off-by: Heikki Krogerus Link: https://lore.kernel.org/r/20191230142611.24921-9-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157

2019-05-30T18:26:37+00:00

Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Richard Fontana Reviewed-by: Kate Stewart Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman

usb: pd: include kernel.h

2018-06-28T10:52:07+00:00

This makes life a bit easier for the drivers that include pd.h. All pd_header_*_le() inline functions defined in pd.h call le16_to_cpu(), and all *_LE() macros in pd.h call cpu_to_le16(). Signed-off-by: Heikki Krogerus Signed-off-by: Greg Kroah-Hartman

typec: tcpm: Add core support for sink side PPS

2018-04-25T12:16:00+00:00

This commit adds code to handle requesting of PPS APDOs. Switching between standard PDOs and APDOs, and re-requesting an APDO to modify operating voltage/current will be triggered by an external call into TCPM. Signed-off-by: Adam Thomson Acked-by: Heikki Krogerus Reviewed-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman