kernel/linux.git/include/linux/usb/hcd.h, branch v6.6.132

usb: xhci: Add timeout argument in address_device USB HCD callback

2024-04-27T15:11:36+00:00

[ Upstream commit a769154c7cac037914ba375ae88aae55b2c853e0 ] - The HCD address_device callback now accepts a user-defined timeout value in milliseconds, providing better control over command execution times. - The default timeout value for the address_device command has been set to 5000 ms, aligning with the USB 3.2 specification. However, this timeout can be adjusted as needed. - The xhci_setup_device function has been updated to accept the timeout value, allowing it to specify the maximum wait time for the command operation to complete. - The hub driver has also been updated to accommodate the newly added timeout parameter during the SET_ADDRESS request. Signed-off-by: Hardik Gajjar Reviewed-by: Mathias Nyman Link: https://lore.kernel.org/r/20231027152029.104363-1-hgajjar@de.adit-jv.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 5a1ccf0c72cf ("usb: new quirk to reduce the SET_ADDRESS request timeout") Signed-off-by: Sasha Levin

USB: Remove remnants of Wireless USB and UWB

2023-08-09T12:17:06+00:00

Wireless USB has long been defunct, and kernel support for it was removed in 2020 by commit caa6772db4c1 ("Staging: remove wusbcore and UWB from the kernel tree."). Nevertheless, some vestiges of the old implementation still clutter up the USB subsystem and one or two other places. Let's get rid of them once and for all. The only parts still left are the user-facing APIs in include/uapi/linux/usb/ch9.h. (There are also a couple of misleading instances, such as the Sierra Wireless USB modem, which is a USB modem made by Sierra Wireless.) Signed-off-by: Alan Stern Link: https://lore.kernel.org/r/b4f2710f-a2de-4fb0-b50f-76776f3a961b@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman

Merge 6.4-rc5 into usb-next

2023-06-05T05:39:02+00:00

We need the USB fixes in here are well. Signed-off-by: Greg Kroah-Hartman

usb: usbfs: Enforce page requirements for mmap

2023-05-29T15:14:28+00:00

The current implementation of usbdev_mmap uses usb_alloc_coherent to allocate memory pages that will later be mapped into the user space. Meanwhile, usb_alloc_coherent employs three different methods to allocate memory, as outlined below: * If hcd->localmem_pool is non-null, it uses gen_pool_dma_alloc to allocate memory; * If DMA is not available, it uses kmalloc to allocate memory; * Otherwise, it uses dma_alloc_coherent. However, it should be noted that gen_pool_dma_alloc does not guarantee that the resulting memory will be page-aligned. Furthermore, trying to map slab pages (i.e., memory allocated by kmalloc) into the user space is not resonable and can lead to problems, such as a type confusion bug when PAGE_TABLE_CHECK=y [1]. To address these issues, this patch introduces hcd_alloc_coherent_pages, which addresses the above two problems. Specifically, hcd_alloc_coherent_pages uses gen_pool_dma_alloc_align instead of gen_pool_dma_alloc to ensure that the memory is page-aligned. To replace kmalloc, hcd_alloc_coherent_pages directly allocates pages by calling __get_free_pages. Reported-by: syzbot+fcf1a817ceb50935ce99@syzkaller.appspotmail.comm Closes: https://lore.kernel.org/lkml/000000000000258e5e05fae79fc1@google.com/ [1] Fixes: f7d34b445abc ("USB: Add support for usbfs zerocopy.") Fixes: ff2437befd8f ("usb: host: Fix excessive alignment restriction for local memory allocations") Cc: stable@vger.kernel.org Signed-off-by: Ruihan Li Acked-by: Alan Stern Link: https://lore.kernel.org/r/20230515130958.32471-2-lrh2000@pku.edu.cn Signed-off-by: Greg Kroah-Hartman

USB: Extend pci resume function to handle PM events

2023-05-13T08:33:18+00:00

Currently, the pci_resume method has only a flag indicating whether the system is resuming from hibernation. In order to handle all PM events like AUTO_RESUME (runtime resume from device in D3), RESUME (system resume from s2idle, S3 or S4 states) etc change the pci_resume method to handle all PM events. Signed-off-by: Basavaraj Natikar Acked-by: Alan Stern Acked-by: Mathias Nyman Link: https://lore.kernel.org/r/20230428140056.1318981-2-Basavaraj.Natikar@amd.com Signed-off-by: Greg Kroah-Hartman

xhci: use pm_ptr() instead of #ifdef for CONFIG_PM conditionals

2023-03-29T06:56:35+00:00

A recent patch caused an unused-function warning in builds with CONFIG_PM disabled, after the function became marked 'static': drivers/usb/host/xhci-pci.c:91:13: error: 'xhci_msix_sync_irqs' defined but not used [-Werror=unused-function] 91 | static void xhci_msix_sync_irqs(struct xhci_hcd *xhci) | ^~~~~~~~~~~~~~~~~~~ This could be solved by adding another #ifdef, but as there is a trend towards removing CONFIG_PM checks in favor of helper macros, do the same conversion here and use pm_ptr() to get either a function pointer or NULL but avoid the warning. As the hidden functions reference some other symbols, make sure those are visible at compile time, at the minimal cost of a few extra bytes for 'struct usb_device'. Fixes: 9abe15d55dcc ("xhci: Move xhci MSI sync function to to xhci-pci") Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20230328131114.1296430-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman

xhci: disable U3 suspended ports in S4 hibernate poweroff_late stage

2022-11-30T11:10:48+00:00

Disable U3 suspended ports in hibernate S4 poweroff_late for systems with XHCI_RESET_TO_DEFAULT quirk, if wakeup is not enabled. This reduces the number of self-powered usb devices from surviving in U3 suspended state into next reboot. Bootloader/firmware on these systems can't handle usb ports in U3, and will timeout, causing extra delay during reboot/restore from S4. Add pci_poweroff_late() callback to struct usb_hcd to get this done at the correct stage in hibernate. Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20221130091944.2171610-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

USB: hcd-pci: Drop the unused id parameter from usb_hcd_pci_probe()

2022-09-01T14:08:35+00:00

Since the HC driver is now passed to the function with its own parameter (it used to be picked from id->driver_data), the id parameter serves no purpose. Signed-off-by: Heikki Krogerus Link: https://lore.kernel.org/r/20220831125052.71584-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx

2022-08-04T19:12:54+00:00

Pull SPDX updates from Greg KH: "Here is the set of SPDX comment updates for 6.0-rc1. Nothing huge here, just a number of updated SPDX license tags and cleanups based on the review of a number of common patterns in GPLv2 boilerplate text. Also included in here are a few other minor updates, two USB files, and one Documentation file update to get the SPDX lines correct. All of these have been in the linux-next tree for a very long time" * tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits) Documentation: samsung-s3c24xx: Add blank line after SPDX directive x86/crypto: Remove stray comment terminator treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE ...

USB: HCD: Fix URB giveback issue in tasklet function

2022-07-27T12:30:19+00:00

Usb core introduce the mechanism of giveback of URB in tasklet context to reduce hardware interrupt handling time. On some test situation(such as FIO with 4KB block size), when tasklet callback function called to giveback URB, interrupt handler add URB node to the bh->head list also. If check bh->head list again after finish all URB giveback of local_list, then it may introduce a "dynamic balance" between giveback URB and add URB to bh->head list. This tasklet callback function may not exit for a long time, which will cause other tasklet function calls to be delayed. Some real-time applications(such as KB and Mouse) will see noticeable lag. In order to prevent the tasklet function from occupying the cpu for a long time at a time, new URBS will not be added to the local_list even though the bh->head list is not empty. But also need to ensure the left URB giveback to be processed in time, so add a member high_prio for structure giveback_urb_bh to prioritize tasklet and schelule this tasklet again if bh->head list is not empty. At the same time, we are able to prioritize tasklet through structure member high_prio. So, replace the local high_prio_bh variable with this structure member in usb_hcd_giveback_urb. Fixes: 94dfd7edfd5c ("USB: HCD: support giveback of URB in tasklet context") Cc: stable Reviewed-by: Alan Stern Signed-off-by: Weitao Wang Link: https://lore.kernel.org/r/20220726074918.5114-1-WeitaoWang-oc@zhaoxin.com Signed-off-by: Greg Kroah-Hartman