kernel/linux.git/include/linux/usb/hcd.h, branch v4.19.238

USB: Report wakeup events on root-hub ports

2018-06-25T13:44:43+00:00

When a USB device attached to a root-hub port sends a wakeup request to a sleeping system, we do not report the wakeup event to the PM core. This is because a system resume involves waking up all suspended USB ports as quickly as possible; without the normal USB_RESUME_TIMEOUT delay, the host controller driver doesn't set the USB_PORT_STAT_C_SUSPEND flag and so usb_port_resume() doesn't realize that a wakeup request was received. However, some environments (such as Chrome OS) want to have all wakeup events reported so they can be ascribed to the appropriate device. To accommodate these environments, this patch adds a new routine to the hub driver and a corresponding new HCD method to be used when a root hub resumes. The HCD method returns a bitmap of ports that have initiated a wakeup signal but not yet completed resuming. The hub driver can then report to the PM core that the child devices attached to these ports initiated a wakeup event. Signed-off-by: Alan Stern Suggested-by: Anshuman Gupta Signed-off-by: Greg Kroah-Hartman

usb: define HCD_USB32 speed option for hosts that support USB 3.2 dual-lane

2018-04-22T14:10:15+00:00

Hosts that support USB 3.2 Enhaned SuperSpeed can set their hcd speed to HCD_USB32 to let usb core and host drivers know that the controller supports new USB 3.2 dual-lane features. make sure usb core handle HCD_USB32 hosts correctly, for now similar to HCD_USB32. Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman

USB: core: hcd: drop support for legacy phys

2018-04-22T13:58:23+00:00

Drop support for looking up and initialising legacy phys in USB core, something which hasn't been used by a mainline kernel since commit 9080b8dc761a ("ARM: OMAP2+: Remove legacy usb-host.c platform init code"). Specifically, since that commit usb_get_phy_dev() have always returned -ENODEV and consequently this code has not been used. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

usb: core: hcd: remove support for initializing a single PHY

2018-03-09T17:43:53+00:00

With the new PHY wrapper in place we can now handle multiple PHYs. Remove the code which handles only one generic PHY as this is now covered (with support for multiple PHYs as well as suspend/resume support) by the new PHY wrapper. Signed-off-by: Martin Blumenstingl Tested-by: Neil Armstrong Signed-off-by: Greg Kroah-Hartman

usb: core: hcd: integrate the PHY wrapper into the HCD core

2018-03-09T17:43:53+00:00

This integrates the PHY wrapper into the core hcd infrastructure. Multiple PHYs which are part of the HCD's device tree node are now managed (= powered on/off when needed), by the new usb_phy_roothub code. Suspend and resume is also supported, however not for runtime/auto-suspend (which is triggered for example when no devices are connected to the USB bus). This is needed on some SoCs (for example Amlogic Meson GXL) because if the PHYs are disabled during auto-suspend then devices which are plugged in afterwards are not seen by the host. One example where this is required is the Amlogic GXL and GXM SoCs: They are using a dwc3 USB controller with up to three ports enabled on the internal roothub. Each port has it's own PHY which must be enabled (if one of the PHYs is left disabled then none of the USB ports works at all). The new logic works on the Amlogic GXL and GXM SoCs because the dwc3 driver internally creates a xhci-hcd which then registers a HCD which then triggers our new PHY wrapper. USB controller drivers can opt out of this by setting "skip_phy_initialization" in struct usb_hcd to true. This is identical to how it works for a single USB PHY, so the "multiple PHY" handling is disabled for drivers that opted out of the management logic of a single PHY. Signed-off-by: Martin Blumenstingl Acked-by: Alan Stern Acked-by: Chunfeng Yun Tested-by: Yixun Lan Tested-by: Neil Armstrong Signed-off-by: Greg Kroah-Hartman

usb: add a flag to skip PHY initialization to struct usb_hcd

2018-03-09T17:43:52+00:00

The USB HCD core driver parses the device-tree node for "phys" and "usb-phys" properties. It also manages the power state of these PHYs automatically. However, drivers may opt-out of this behavior by setting "phy" or "usb_phy" in struct usb_hcd to a non-null value. An example where this is required is the "Qualcomm USB2 controller", implemented by the chipidea driver. The hardware requires that the PHY is only powered on after the "reset completed" event from the controller is received. A follow-up patch will allow the USB HCD core driver to manage more than one PHY. Add a new "skip_phy_initialization" bitflag to struct usb_hcd so drivers can opt-out of any PHY management provided by the USB HCD core driver. This also updates the existing drivers so they use the new flag if they want to opt out of the PHY management provided by the USB HCD core driver. This means that for these drivers the new "multiple PHY" handling (which will be added in a follow-up patch) will be disabled as well. Signed-off-by: Martin Blumenstingl Acked-by: Peter Chen Tested-by: Neil Armstrong Signed-off-by: Greg Kroah-Hartman

USB: add SPDX identifiers to all remaining files in drivers/usb/

2017-11-04T10:48:02+00:00

It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner Cc: Kate Stewart Cc: Philippe Ombredanne Signed-off-by: Greg Kroah-Hartman Acked-by: Felipe Balbi Acked-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

usb: Fix typo in the definition of Endpoint[out]Request

2017-06-13T08:48:24+00:00

The current definition is wrong. This breaks my upcoming Aspeed virtual hub driver. Signed-off-by: Benjamin Herrenschmidt Acked-by: Alan Stern Cc: stable Signed-off-by: Greg Kroah-Hartman

usb: host: xhci-ring: don't need to clear interrupt pending for MSI enabled hcd

2017-05-18T13:19:41+00:00

According to xHCI spec Figure 30: Interrupt Throttle Flow Diagram If PCI Message Signaled Interrupts (MSI or MSI-X) are enabled, then the assertion of the Interrupt Pending (IP) flag in Figure 30 generates a PCI Dword write. The IP flag is automatically cleared by the completion of the PCI write. the MSI enabled HCs don't need to clear interrupt pending bit, but hcd->irq = 0 doesn't equal to MSI enabled HCD. At some Dual-role controller software designs, it sets hcd->irq as 0 to avoid HCD requesting interrupt, and they want to decide when to call usb_hcd_irq by software. Signed-off-by: Peter Chen Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman

usb: separate out sysdev pointer from usb_bus

2017-03-23T07:20:21+00:00

For xhci-hcd platform device, all the DMA parameters are not configured properly, notably dma ops for dwc3 devices. The idea here is that you pass in the parent of_node along with the child device pointer, so it would behave exactly like the parent already does. The difference is that it also handles all the other attributes besides the mask. sysdev will represent the physical device, as seen from firmware or bus.Splitting the usb_bus->controller field into the Linux-internal device (used for the sysfs hierarchy, for printks and for power management) and a new pointer (used for DMA, DT enumeration and phy lookup) probably covers all that we really need. Signed-off-by: Arnd Bergmann Signed-off-by: Sriram Dash Tested-by: Baolin Wang Tested-by: Brian Norris Tested-by: Alexander Sverdlin Tested-by: Vivek Gautam Signed-off-by: Mathias Nyman Signed-off-by: Peter Chen Cc: Felipe Balbi Cc: Grygorii Strashko Cc: Sinjan Kumar Cc: David Fisher Cc: Catalin Marinas Cc: "Thang Q. Nguyen" Cc: Yoshihiro Shimoda Cc: Stephen Boyd Cc: Bjorn Andersson Cc: Ming Lei Cc: Jon Masters Cc: Dann Frazier Cc: Peter Chen Cc: Leo Li Signed-off-by: Greg Kroah-Hartman