kernel/linux.git/include/linux/usb/chipidea.h, branch v6.6.131

usb: chipidea: add CI_HDRC_HAS_SHORT_PKT_LIMIT flag

2025-01-09T12:31:46+00:00

[ Upstream commit ec841b8d73cff37f8960e209017efe1eb2fb21f2 ] Currently, the imx deivice controller has below limitations: 1. can't generate short packet interrupt if IOC not set in dTD. So if one request span more than one dTDs and only the last dTD set IOC, the usb request will pending there if no more data comes. 2. the controller can't accurately deliver data to differtent usb requests in some cases due to short packet. For example: one usb request span 3 dTDs, then if the controller received a short packet the next packet will go to 2nd dTD of current request rather than the first dTD of next request. 3. can't build a bus packet use multiple dTDs. For example: controller needs to send one packet of 512 bytes use dTD1 (200 bytes) + dTD2 (312 bytes), actually the host side will see 200 bytes short packet. Based on these limits, add CI_HDRC_HAS_SHORT_PKT_LIMIT flag and use it on imx platforms. Signed-off-by: Xu Yang Acked-by: Peter Chen Link: https://lore.kernel.org/r/20240923081203.2851768-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: chipidea: add CI_HDRC_FORCE_VBUS_ACTIVE_ALWAYS flag

2025-01-09T12:31:46+00:00

[ Upstream commit 2978cc1f285390c1bd4d9bfc665747adc6e4b19c ] Adding CI_HDRC_FORCE_VBUS_ACTIVE_ALWAYS flag to modify the vbus_active parameter to active in case the ChipIdea USB IP role is device-only and there is no otgsc register. Signed-off-by: Tomer Maimon Acked-by: Peter Chen Link: https://lore.kernel.org/r/20231017195903.1665260-2-tmaimon77@gmail.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: ec841b8d73cf ("usb: chipidea: add CI_HDRC_HAS_SHORT_PKT_LIMIT flag") Signed-off-by: Sasha Levin

usb: chipidea: add workaround for chipidea PEC bug

2023-08-09T12:16:06+00:00

Some NXP processors using ChipIdea USB IP have a bug when frame babble is detected. Issue description: In USB camera test, our controller is host in HS mode. In ISOC IN, when device sends data across the micro frame, it causes the babble in host controller. This will clear the PE bit. In spec, it also requires to set the PEC bit and then set the PCI bit. Without the PCI interrupt, the software does not know the PE is cleared. This will add a flag CI_HDRC_HAS_PORTSC_PEC_MISSED to some impacted platform datas. And the ehci host driver will assert PEC by SW when specific conditions are satisfied. Signed-off-by: Xu Yang Link: https://lore.kernel.org/r/20230809024432.535160-2-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman

usb: chipidea: Add support for VBUS control with PHY

2022-08-31T07:07:52+00:00

Some platforms make use of VBUS control over PHY which means controller driver has to access PHY registers to turn on/off VBUS line.This patch adds support for such platforms in chipidea. Flag 'CI_HDRC_PHY_VBUS_CONTROL' added to support VBus control feature. Acked-by: Peter Chen Signed-off-by: Piyush Mehta Signed-off-by: Piyush Mehta Link: https://lore.kernel.org/r/20220822054051.2941282-1-piyush.mehta@amd.com Signed-off-by: Greg Kroah-Hartman

usb: chipidea: tegra: Support host mode

2021-01-13T10:26:34+00:00

Add USB host mode to the Tegra HDRC driver. This allows us to benefit from support provided by the generic ChipIdea driver instead of duplicating the effort in a separate ehci-tegra driver. Tested-by: Matt Merhar Tested-by: Nicolas Chauvet Tested-by: Ion Agorria Acked-by: Thierry Reding Acked-by: Peter Chen Signed-off-by: Peter Geis Signed-off-by: Dmitry Osipenko Link: https://lore.kernel.org/r/20201218120246.7759-6-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: chipidea: add query_available_role interface

2020-07-28T06:06:59+00:00

The glue layer may need to know current available role to do some setting, eg, the wakeup setting. So we add ci_hdrc_query_available_role for that. Signed-off-by: Peter Chen

usb: chipidea: introduce CI_HDRC_CONTROLLER_VBUS_EVENT glue layer use

2020-05-06T01:41:55+00:00

Some vendors glue layer need to handle some events for vbus, eg, some i.mx platforms (imx7d, imx8mm, imx8mn, etc) needs vbus event to handle charger detection, its charger detection is finished at glue layer code, but not at USB PHY driver. Signed-off-by: Peter Chen

usb: chipidea: imx: add imx7ulp support

2019-06-14T09:39:43+00:00

In this commit, we add CI_HDRC_PMQOS to avoid system entering idle, at imx7ulp, if the system enters idle, the DMA will stop, so the USB transfer can't work at this case. Signed-off-by: Peter Chen

usb: chipidea: add flag for imx hsic implementation

2018-12-11T01:12:29+00:00

NXP (Freecale) imx HSIC design has some special requirements, add some flags at host code to handle them. Reviewed-by: Frieder Schrempf Tested-by: Frieder Schrempf Signed-off-by: Peter Chen

usb: chipidea: Add dynamic pinctrl selection

2018-09-20T09:04:21+00:00

Some hardware implementations require to configure pins differently according to the USB role (host/device), this can be an update of the pins routing or a simple GPIO value change. This patch introduces new optional "host" and "device" pinctrls. If these pinctrls are defined by the device, they are respectively selected on host/device role start. If a default pinctrl exist, it is restored on host/device role stop. Signed-off-by: Loic Poulain Signed-off-by: Peter Chen