kernel/linux.git/include/linux/switchtec.h, branch v6.6.132

PCI: switchtec: Add support for PCIe Gen5 devices

2023-08-09T19:16:44+00:00

Advertise support of Gen5 devices in the driver's device ID table and add the same IDs for the switchtec quirks. Also update driver code to accommodate them. Link: https://lore.kernel.org/r/20230624000003.2315364-3-kelvin.cao@microchip.com Signed-off-by: Kelvin Cao Signed-off-by: Bjorn Helgaas Reviewed-by: Logan Gunthorpe

ntb_hw_switchtec: Remove code for disabling ID protection

2022-01-11T20:38:59+00:00

ID protection is a firmware setting for NT window access control. With it enabled, only the posted requests with requester IDs in the requester ID table will be allowed to access the NT windows. Otherwise all posted requests are allowed. Normally user will configure it statically via the Switchtec config file, and it will take effect when the firmware boots up. The driver can also toggle the ID protection setting dynamically, which will overwrite the static setting in the Switchtec config file as a side effect. Currently, the driver disables the ID protection. However, it's not necessary to disable the ID protection at the driver level as the driver has already configured the proper requester IDs in the requester ID table to allow the corresponding posted requests to hit the NT windows. Remove the code that disables the ID protection to make the static setting prevail. Note: ID protection is not applicable to non-posted requests. Signed-off-by: Kelvin Cao Signed-off-by: Jon Mason

PCI/switchtec: Add check of event support

2021-10-14T14:22:47+00:00

Not all events are supported by every gen/variant of the Switchtec firmware. To solve this, since Gen4, a new bit in each event header is introduced to indicate if an event is supported by the firmware. Link: https://lore.kernel.org/r/20211014141859.11444-6-kelvin.cao@microchip.com Signed-off-by: Logan Gunthorpe Signed-off-by: Kelvin Cao Signed-off-by: Bjorn Helgaas

PCI/switchtec: Add Gen4 MRPC GAS access permission check

2020-01-15T17:00:39+00:00

Gen4 hardware provides new MRPC commands to read and write directly from any address in the PCI BAR (which Microsemi refers to as GAS). Since accessing BARs can be dangerous and break the driver, we don't want unprivileged users to have this ability. Therefore, require CAP_SYS_ADMIN for the local and remote GAS access MRPC commands. Privileged processes will already have access to the BAR through the sysfs resource file so this doesn't give userspace any capabilities it didn't already have. [logang@deltatee.com: rework commit message] Link: https://lore.kernel.org/r/20200106190337.2428-11-logang@deltatee.com Signed-off-by: Kelvin Cao Signed-off-by: Logan Gunthorpe Signed-off-by: Bjorn Helgaas

PCI/switchtec: Add Gen4 flash information interface support

2020-01-15T17:00:39+00:00

Add the new flash_info registers struct and the implementation of ioctl_flash_part_info() for the new Gen4 hardware. [logang@deltatee.com: rewrote commit message] Link: https://lore.kernel.org/r/20200115035648.2578-7-logang@deltatee.com Signed-off-by: Kelvin Cao Signed-off-by: Logan Gunthorpe Signed-off-by: Bjorn Helgaas

PCI/switchtec: Add Gen4 system info register support

2020-01-15T17:00:38+00:00

Add the Gen4-specific system info registers and ensure their usage is guarded by a check on the device's generation. Link: https://lore.kernel.org/r/20200115035648.2578-6-logang@deltatee.com Signed-off-by: Logan Gunthorpe Signed-off-by: Bjorn Helgaas

PCI/switchtec: Separate Gen3 register structures into unions

2020-01-15T17:00:38+00:00

Since the sys_info and flash_info registers differ significantly in Gen4 hardware, separate out the Gen3 registers into their own structure with a union in the main structure. No functional changes intended. Link: https://lore.kernel.org/r/20200115035648.2578-5-logang@deltatee.com Signed-off-by: Logan Gunthorpe Signed-off-by: Bjorn Helgaas

PCI/switchtec: Add 'generation' variable

2020-01-15T17:00:37+00:00

Add a generation variable passed through the device ID table and test for Gen3-specific registers. This will allow us to add Gen4 and other devices that extend the programming model. Link: https://lore.kernel.org/r/20200115035648.2578-3-logang@deltatee.com Signed-off-by: Logan Gunthorpe Signed-off-by: Bjorn Helgaas

PCI/switchtec: Rename generation-specific constants

2020-01-15T17:00:37+00:00

Gen4 hardware will have different values for the SWITCHTEC_X_RUNNING and SWITCHTEC_IOCTL_NUM_PARTITIONS, so rename them with GEN3 in their name. No functional changes intended. Link: https://lore.kernel.org/r/20200115035648.2578-2-logang@deltatee.com Signed-off-by: Logan Gunthorpe Signed-off-by: Bjorn Helgaas

PCI/switchtec: Add support for Intercomm Notify and Upstream Error Containment

2020-01-15T17:00:27+00:00

Add support for the Inter Fabric Manager Communication (Intercomm) Notify event in PAX variants of Switchtec hardware and the Upstream Error Containment port in the MR1 release of Gen3 firmware. Link: https://lore.kernel.org/r/20200106190337.2428-4-logang@deltatee.com Signed-off-by: Logan Gunthorpe Signed-off-by: Bjorn Helgaas