kernel/linux.git/include/linux/stmmac.h, branch v6.1.168

net: stmmac: remove support for lpi_intr_o

2026-03-25T10:03:19+00:00

commit 14eb64db8ff07b58a35b98375f446d9e20765674 upstream. The dwmac databook for v3.74a states that lpi_intr_o is a sideband signal which should be used to ungate the application clock, and this signal is synchronous to the receive clock. The receive clock can run at 2.5, 25 or 125MHz depending on the media speed, and can stop under the control of the link partner. This means that the time it takes to clear is dependent on the negotiated media speed, and thus can be 8, 40, or 400ns after reading the LPI control and status register. It has been observed with some aggressive link partners, this clock can stop while lpi_intr_o is still asserted, meaning that the signal remains asserted for an indefinite period that the local system has no direct control over. The LPI interrupts will still be signalled through the main interrupt path in any case, and this path is not dependent on the receive clock. This, since we do not gate the application clock, and the chances of adding clock gating in the future are slim due to the clocks being ill-defined, lpi_intr_o serves no useful purpose. Remove the code which requests the interrupt, and all associated code. Reported-by: Ovidiu Panait Tested-by: Ovidiu Panait # Renesas RZ/V2H board Signed-off-by: Russell King (Oracle) Link: https://patch.msgid.link/E1vnJbt-00000007YYN-28nm@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski Signed-off-by: Ovidiu Panait Signed-off-by: Greg Kroah-Hartman

net: stmmac: dwmac4: Allow platforms to specify some DMA/MTL offsets

2026-01-11T14:19:02+00:00

[ Upstream commit 33719b57f52e5b761234373f98f55f4e036d61c9 ] Some platforms have dwmac4 implementations that have a different address space layout than the default, resulting in the need to define their own DMA/MTL offsets. Extend the functions to allow a platform driver to indicate what its addresses are, overriding the defaults. Signed-off-by: Andrew Halaney Reviewed-by: Jesse Brandeburg Tested-by: Brian Masney Signed-off-by: Paolo Abeni Stable-dep-of: a48e23221000 ("net: stmmac: fix the crash issue for zero copy XDP_TX action") Signed-off-by: Sasha Levin

net: stmmac: Power up SERDES after the PHY link

2026-01-11T14:19:02+00:00

[ Upstream commit a46e9010124256f5bf5fc2c241a45cf1944b768e ] The Tegra MGBE ethernet controller requires that the SERDES link is powered-up after the PHY link is up, otherwise the link fails to become ready following a resume from suspend. Add a variable to indicate that the SERDES link must be powered-up after the PHY link. Signed-off-by: Revanth Kumar Uppala Signed-off-by: Jon Hunter Signed-off-by: David S. Miller Stable-dep-of: a48e23221000 ("net: stmmac: fix the crash issue for zero copy XDP_TX action") Signed-off-by: Sasha Levin

net: stmmac: fix FPE events losing

2023-12-13T17:39:08+00:00

[ Upstream commit 37e4b8df27bc68340f3fc80dbb27e3549c7f881c ] The status bits of register MAC_FPE_CTRL_STS are clear on read. Using 32-bit read for MAC_FPE_CTRL_STS in dwmac5_fpe_configure() and dwmac5_fpe_send_mpacket() clear the status bits. Then the stmmac interrupt handler missing FPE event status and leads to FPE handshaking failure and retries. To avoid clear status bits of MAC_FPE_CTRL_STS in dwmac5_fpe_configure() and dwmac5_fpe_send_mpacket(), add fpe_csr to stmmac_fpe_cfg structure to cache the control bits of MAC_FPE_CTRL_STS and to avoid reading MAC_FPE_CTRL_STS in those methods. Fixes: 5a5586112b92 ("net: stmmac: support FPE link partner hand-shaking procedure") Reviewed-by: Serge Semin Signed-off-by: Jianheng Zhang Link: https://lore.kernel.org/r/CY5PR12MB637225A7CF529D5BE0FBE59CBF81A@CY5PR12MB6372.namprd12.prod.outlook.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: stmmac: Fix for mismatched host/device DMA address width

2023-03-30T10:49:05+00:00

[ Upstream commit 070246e4674b125860d311c18ce2623e73e2bd51 ] Currently DMA address width is either read from a RO device register or force set from the platform data. This breaks DMA when the host DMA address width is <=32it but the device is >32bit. Right now the driver may decide to use a 2nd DMA descriptor for another buffer (happens in case of TSO xmit) assuming that 32bit addressing is used due to platform configuration but the device will still use both descriptor addresses as one address. This can be observed with the Intel EHL platform driver that sets 32bit for addr64 but the MAC reports 40bit. The TX queue gets stuck in case of TCP with iptables NAT configuration on TSO packets. The logic should be like this: Whatever we do on the host side (memory allocation GFP flags) should happen with the host DMA width, whenever we decide how to set addresses on the device registers we must use the device DMA address width. This patch renames the platform address width field from addr64 (term used in device datasheet) to host_addr and uses this value exclusively for host side operations while all chip operations consider the device DMA width as read from the device register. Fixes: 7cfc4486e7ea ("stmmac: intel: Configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressing") Signed-off-by: Jochen Henneberg Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: stmmac: do not stop RX_CLK in Rx LPI state for qcs404 SoC

2023-02-22T11:59:43+00:00

[ Upstream commit 54aa39a513dbf2164ca462a19f04519b2407a224 ] Currently in phy_init_eee() the driver unconditionally configures the PHY to stop RX_CLK after entering Rx LPI state. This causes an LPI interrupt storm on my qcs404-base board. Change the PHY initialization so that for "qcom,qcs404-ethqos" compatible device RX_CLK continues to run even in Rx LPI state. Signed-off-by: Andrey Konovalov Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

stmmac: intel: remove unused 'has_crossts' flag

2022-08-18T03:40:52+00:00

The 'has_crossts' flag was not used anywhere in the stmmac driver, removing it from both header file and dwmac-intel driver. Signed-off-by: Wong Vee Khee Reviewed-by: Kurt Kanzenbach Link: https://lore.kernel.org/r/20220817064324.10025-1-veekhee@gmail.com Signed-off-by: Jakub Kicinski

net: stmmac: switch to use interrupt for hw crosstimestamping

2022-07-18T10:14:35+00:00

Using current implementation of polling mode, there is high chances we will hit into timeout error when running phc2sys. Hence, update the implementation of hardware crosstimestamping to use the MAC interrupt service routine instead of polling for TSIS bit in the MAC Timestamp Interrupt Status register to be set. Cc: Richard Cochran Signed-off-by: Wong Vee Khee Signed-off-by: David S. Miller

net: stmmac: disable Split Header (SPH) for Intel platforms

2022-05-01T12:20:03+00:00

Based on DesignWare Ethernet QoS datasheet, we are seeing the limitation of Split Header (SPH) feature is not supported for Ipv4 fragmented packet. This SPH limitation will cause ping failure when the packets size exceed the MTU size. For example, the issue happens once the basic ping packet size is larger than the configured MTU size and the data is lost inside the fragmented packet, replaced by zeros/corrupted values, and leads to ping fail. So, disable the Split Header for Intel platforms. v2: Add fixes tag in commit message. Fixes: 67afd6d1cfdf("net: stmmac: Add Split Header support and enable it in XGMAC cores") Cc: # 5.10.x Suggested-by: Ong, Boon Leong Signed-off-by: Mohammad Athari Bin Ismail Signed-off-by: Wong Vee Khee Signed-off-by: Tan Tee Min Signed-off-by: David S. Miller

net: stmmac: Add platform level debug register dump feature

2021-11-30T11:57:58+00:00

dwmac-qcom-ethqos currently exposes a mechanism to dump rgmii registers after the 'stmmac_dvr_probe()' returns. However with commit 5ec55823438e ("net: stmmac: add clocks management for gmac driver"), we now let 'pm_runtime_put()' disable the clocks before returning from 'stmmac_dvr_probe()'. This causes a crash when 'rgmii_dump()' register dumps are enabled, as the clocks are already off. Since other dwmac drivers (possible future users as well) might require a similar register dump feature, introduce a platform level callback to allow the same. This fixes the crash noticed while enabling rgmii_dump() dumps in dwmac-qcom-ethqos driver as well. It also allows future changes to keep a invoking the register dump callback from the correct place inside 'stmmac_dvr_probe()'. Fixes: 5ec55823438e ("net: stmmac: add clocks management for gmac driver") Cc: Joakim Zhang Cc: David S. Miller Signed-off-by: Bhupesh Sharma Signed-off-by: David S. Miller