kernel/linux.git/include/linux/ssb/ssb.h, branch linux-2.6.35.y

ssb: Look for SPROM at different offset on higher rev CC

2010-04-26T17:51:08+00:00

Our offset handling becomes even a little more hackish now. For some reason I do not understand all offsets as inrelative. It assumes base offset is 0x1000 but it will work for now as we make offsets relative anyway by removing base 0x1000. Should be cleaner however. Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville

ssb: do not read SPROM if it does not exist

2010-04-26T17:50:54+00:00

Attempting to read registers that don't exist on the SSB bus can cause hangs on some boxes. At least some b43 devices are 'in the wild' that don't have SPROMs at all. When the SSB bus support loads, it attempts to read these (non-existant) SPROMs and causes hard hangs on the box -- no console output, etc. This patch adds some intelligence to determine whether or not the SPROM is present before attempting to read it. This avoids those hard hangs on those devices with no SPROM attached to their SSB bus. The SSB-attached devices (e.g. b43, et al.) won't work, but at least the box will survive to test further patches. :-) Signed-off-by: John W. Linville Signed-off-by: Rafał Miłecki Cc: Larry Finger Cc: Michael Buesch

ssb: Put host pointers into a union

2009-10-27T20:47:55+00:00

This slightly shrinks the structure. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville

ssb: Implement SDIO host bus support

2009-09-09T15:19:00+00:00

Add support for communicating with a Sonics Silicon Backplane through a SDIO interface, as found in the Nintendo Wii WLAN daughter card. The Nintendo Wii WLAN card includes a custom Broadcom 4318 chip with a SDIO host interface. Signed-off-by: Albert Herranz Signed-off-by: Michael Buesch Signed-off-by: John W. Linville

ssb: Implement the remaining rev.8 SPROM vars needed for LP-PHY

2009-08-14T13:14:02+00:00

Also add a "SPEX32" macro for extracting 32-bit SPROM variables. Signed-off-by: Gábor Stefanik Signed-off-by: John W. Linville

ssb: Add SPROM fallback support

2009-03-05T19:39:32+00:00

This adds SSB functionality to register a fallback SPROM image from the architecture setup code. Weird architectures exist that have half-assed SSB devices without SPROM attached to their PCI busses. The architecture can register a fallback SPROM image that is used if no SPROM is found on the SSB device. Signed-off-by: Michael Buesch Cc: Florian Fainelli Signed-off-by: John W. Linville

ssb: Fix DMA-API compilation for non-PCI systems

2008-11-10T21:50:19+00:00

This fixes compilation of the SSB DMA-API code on non-PCI platforms. Signed-off-by: Michael Buesch Signed-off-by: David S. Miller

dma-mapping: add the device argument to dma_mapping_error()

2008-07-26T19:00:03+00:00

Add per-device dma_mapping_ops support for CONFIG_X86_64 as POWER architecture does: This enables us to cleanly fix the Calgary IOMMU issue that some devices are not behind the IOMMU (http://lkml.org/lkml/2008/5/8/423). I think that per-device dma_mapping_ops support would be also helpful for KVM people to support PCI passthrough but Andi thinks that this makes it difficult to support the PCI passthrough (see the above thread). So I CC'ed this to KVM camp. Comments are appreciated. A pointer to dma_mapping_ops to struct dev_archdata is added. If the pointer is non NULL, DMA operations in asm/dma-mapping.h use it. If it's NULL, the system-wide dma_ops pointer is used as before. If it's useful for KVM people, I plan to implement a mechanism to register a hook called when a new pci (or dma capable) device is created (it works with hot plugging). It enables IOMMUs to set up an appropriate dma_mapping_ops per device. The major obstacle is that dma_mapping_error doesn't take a pointer to the device unlike other DMA operations. So x86 can't have dma_mapping_ops per device. Note all the POWER IOMMUs use the same dma_mapping_error function so this is not a problem for POWER but x86 IOMMUs use different dma_mapping_error functions. The first patch adds the device argument to dma_mapping_error. The patch is trivial but large since it touches lots of drivers and dma-mapping.h in all the architecture. This patch: dma_mapping_error() doesn't take a pointer to the device unlike other DMA operations. So we can't have dma_mapping_ops per device. Note that POWER already has dma_mapping_ops per device but all the POWER IOMMUs use the same dma_mapping_error function. x86 IOMMUs use device argument. [akpm@linux-foundation.org: fix sge] [akpm@linux-foundation.org: fix svc_rdma] [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: fix bnx2x] [akpm@linux-foundation.org: fix s2io] [akpm@linux-foundation.org: fix pasemi_mac] [akpm@linux-foundation.org: fix sdhci] [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: fix sparc] [akpm@linux-foundation.org: fix ibmvscsi] Signed-off-by: FUJITA Tomonori Cc: Muli Ben-Yehuda Cc: Andi Kleen Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Avi Kivity Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

ssb: Include dma-mapping.h

2008-07-14T18:52:56+00:00

ssb.h implements DMA mapping functions, so it should include dma-mapping.h. This fixes compile failures on certain architectures. Reported-by: Stephen Rothwell Signed-off-by: Michael Buesch Signed-off-by: John W. Linville

ssb, b43, b43legacy, b44: Rewrite SSB DMA API

2008-06-27T13:09:15+00:00

This is a rewrite of the DMA API for SSB devices. This is needed, because the old (non-existing) "API" made too many bad assumptions on the API of the host-bus (PCI). This introduces an almost complete SSB-DMA-API that maps to the lowlevel bus-API based on the bustype. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville