kernel/linux.git/include/linux/spi, branch linux-6.9.y

spi: Fix OCTAL mode support

2024-07-25T07:53:29+00:00

[ Upstream commit d6a711a898672dd873aab3844f754a3ca40723a5 ] Add OCTAL mode support. Issue detected using "--octal" spidev_test's option. Signed-off-by: Patrice Chotard Link: https://msgid.link/r/20240618132951.2743935-4-patrice.chotard@foss.st.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

spi: add defer_optimize_message controller flag

2024-07-18T11:22:38+00:00

[ Upstream commit ca52aa4c60f76566601b42e935b8a78f0fb4f8eb ] Adding spi_optimize_message() broke the spi-mux driver because it calls spi_async() from it's transfer_one_message() callback. This resulted in passing an incorrectly optimized message to the controller. For example, if the underlying controller has an optimize_message() callback, this would have not been called and can cause a crash when the underlying controller driver tries to transfer the message. Also, since the spi-mux driver swaps out the controller pointer by replacing msg->spi, __spi_unoptimize_message() was being called with a different controller than the one used in __spi_optimize_message(). This could cause a crash when attempting to free the message resources when __spi_unoptimize_message() is called in spi_finalize_current_message() since it is being called with a controller that did not allocate the resources. This is fixed by adding a defer_optimize_message flag for controllers. This flag causes all of the spi_[maybe_][un]optimize_message() calls to be a no-op (other than attaching a pointer to the spi device to the message). This allows the spi-mux driver to pass an unmodified message to spi_async() in spi_mux_transfer_one_message() after the spi device has been swapped out. This causes __spi_optimize_message() and __spi_unoptimize_message() to be called only once per message and with the correct/same controller in each case. Reported-by: Oleksij Rempel Closes: https://lore.kernel.org/linux-spi/Zn6HMrYG2b7epUxT@pengutronix.de/ Reported-by: Marc Kleine-Budde Closes: https://lore.kernel.org/linux-spi/20240628-awesome-discerning-bear-1621f9-mkl@pengutronix.de/ Fixes: 7b1d87af14d9 ("spi: add spi_optimize_message() APIs") Signed-off-by: David Lechner Link: https://patch.msgid.link/20240708-spi-mux-fix-v1-2-6c8845193128@baylibre.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

Merge tag 'sound-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

2024-03-14T18:10:43+00:00

Pull sound updates from Takashi Iwai: "This was a relatively calm development cycle. Most of changes are rather small device-specific fixes and enhancements. The only significant changes in ALSA core are code refactoring with the recent cleanup infrastructure, which should bring no functionality changes. Some highlights below: Core: - Lots of cleanups in ALSA core code with automatic kfree cleanup and locking guard macros - New ALSA core kunit test ASoC: - SoundWire support for AMD ACP 6.3 systems - Support for reporting version information for AVS firmware - Support DSPless mode for Intel Soundwire systems - Support for configuring CS35L56 amplifiers using EFI calibration data - Log which component is being operated on as part of power management trace events. - Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x HD- and USB-audio: - More Cirrus HD-audio codec support - TAS2781 HD-audio codec fixes - Scarlett2 mixer fixes Others: - Enhancement of virtio driver for audio control supports - Cleanups of legacy PM code with new macros - Firewire sound updates" * tag 'sound-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (307 commits) ALSA: usb-audio: Stop parsing channels bits when all channels are found. ALSA: hda/tas2781: remove unnecessary runtime_pm calls ALSA: hda/realtek - ALC236 fix volume mute & mic mute LED on some HP models ALSA: aaci: Delete unused variable in aaci_do_suspend ALSA: scarlett2: Fix Scarlett 4th Gen input gain range again ALSA: scarlett2: Fix Scarlett 4th Gen input gain range ALSA: scarlett2: Fix Scarlett 4th Gen autogain status values ALSA: scarlett2: Fix Scarlett 4th Gen 4i4 low-voltage detection ALSA: hda/tas2781: restore power state after system_resume ALSA: hda/tas2781: do not call pm_runtime_force_* in system_resume/suspend ALSA: hda/tas2781: do not reset cur_* values in runtime_suspend ALSA: hda/tas2781: add lock to system_suspend ALSA: hda/tas2781: use dev_dbg in system_resume ALSA: hda/realtek: fix ALC285 issues on HP Envy x360 laptops platform/x86: serial-multi-instantiate: Add support for CS35L54 and CS35L57 ALSA: hda: cs35l56: Add support for CS35L54 and CS35L57 ASoC: cs35l56: Add support for CS35L54 and CS35L57 ASoC: Intel: catpt: Carefully use PCI bitwise constants ALSA: hda: hda_component: Include sound/hda_codec.h ALSA: hda: hda_component: Add missing #include guards ...

spi: Fix types of the last chip select storage variables

2024-03-07T15:07:10+00:00

First of all, last_cs_index_mask should be aligned with the original cs_index_mask, which is 16-bit (for now) wide. Use the same pattern for the last_cs_index_mask. Second, last_cs can be negative and since 'char' is equal to 'unsigned char' in the kernel, it's incorrect, strictly speaking, to assign signed number to it. Use s8 type as it's done for *_native_cs ones. With this change, regroup a bit the ordering to avoid too much memory space to be wasted due to paddings. Shuffle kernel documentation accordignly. Signed-off-by: Andy Shevchenko Link: https://msgid.link/r/20240307150256.3789138-3-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown

spi: add spi_optimize_message() APIs

2024-02-26T13:55:10+00:00

This adds a new spi_optimize_message() function that can be used to optimize SPI messages that are used more than once. Peripheral drivers that use the same message multiple times can use this API to perform SPI message validation and controller-specific optimizations once and then reuse the message while avoiding the overhead of revalidating the message on each spi_(a)sync() call. Internally, the SPI core will also call this function for each message if the peripheral driver did not explicitly call it. This is done to so that controller drivers don't have to have multiple code paths for optimized and non-optimized messages. A hook is provided for controller drivers to perform controller-specific optimizations. Suggested-by: Martin Sperl Link: https://lore.kernel.org/linux-spi/39DEC004-10A1-47EF-9D77-276188D2580C@martin.sperl.org/ Signed-off-by: David Lechner Link: https://msgid.link/r/20240219-mainline-spi-precook-message-v2-1-4a762c6701b9@baylibre.com Reviewed-by: Jonathan Cameron Signed-off-by: Mark Brown

spi: gpio: Follow renaming of SPI "master" to "controller"

2024-02-09T17:26:34+00:00

In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"") some functions and struct members were renamed. Recent work by Uwe completes this renaming. However, there are plenty of leftovers in the comments and in-code documentation. Update them as well. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240209165423.2305493-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown

spi: pxa2xx: Use typedef for dma_filter_fn

2024-02-08T21:23:42+00:00

Use existing typedef for dma_filter_fn to avoid duplicating type definition. Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20240208202154.630336-3-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown

spi: get rid of some legacy macros

2024-02-08T20:19:18+00:00

Merge series from Uwe Kleine-König : This series finishes off the removal of some of the legacy names for SPI controllers and devices.

spi: Drop compat layer from renaming "master" to "controller"

2024-02-08T11:55:00+00:00

Now that all in-tree users followed the rename, the compat stuff can go away. This completes the renaming started with commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"") Acked-by: Jonathan Cameron Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/ad1d949325b61a4682e8d6ecf9d05da751e6a99f.1707324794.git.u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown

spi: bitbang: Follow renaming of SPI "master" to "controller"

2024-02-08T11:54:48+00:00

In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"") some functions and struct members were renamed. To not break all drivers compatibility macros were provided. To be able to remove these compatibility macros push the renaming into the SPI bitbang controller drivers. Acked-by: Jonathan Cameron Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/f7f949feb803acb8bea75798f41371a13287f4e8.1707324794.git.u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown