kernel/linux.git/include/linux/soundwire/sdw.h, branch v5.13.1

soundwire: add static port mapping support

2021-04-06T04:52:02+00:00

Some of the SoundWire device ports are statically mapped to Controller ports during design, however there is no way to expose this information to the controller. Controllers like Qualcomm ones use this info to setup static bandwidth parameters for those ports. A generic port allocation is not possible in this cases! So this patch adds a new member m_port_map to struct sdw_slave to expose this static map. Signed-off-by: Srinivas Kandagatla Reviewed-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20210315165650.13392-2-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul

soundwire: export sdw_compare_devid, sdw_extract_slave_id and sdw_slave_add

2021-03-30T17:25:07+00:00

Exporting these three functions makes sense as it can be used by other controllers like Qualcomm during auto-enumeration! Reported-by: kernel test robot Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20210330144719.13284-8-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul

soundwire: add definition for DPn BlockPackingMode

2021-03-30T09:06:11+00:00

For some reason we don't have an enum for this concept. Add definitions following Table 102 of the SoundWire 1.2 specification. Signed-off-by: Pierre-Louis Bossart Reviewed-by: Rander Wang Signed-off-by: Bard Liao Link: https://lore.kernel.org/r/20210323050701.23760-2-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul

soundwire: add master quirks for bus clash and parity

2021-03-22T12:16:39+00:00

Currently quirks are only allowed for Slave devices. This patch describes the need for two quirks at the Master level. a) bus clash The SoundWire specification allows a Slave device to report a bus clash with the in-band interrupt mechanism when it detects a conflict while driving a bitSlot it owns. This can be a symptom of an electrical conflict or a programming error, and it's vital to detect reliably. Unfortunately, on some platforms, bus clashes are randomly reported by Slave devices after a bus reset, with an interrupt status set even before the bus clash interrupt is enabled. These initial spurious interrupts are not relevant and should optionally be filtered out, while leaving the interrupt mechanism enabled to detect 'true' issues. This patch suggests the addition of a Master level quirk to discard such interrupts. The quirk should in theory have been added at the Slave level, but since the problem was detected with different generations of Slave devices it's hard to point to a specific IP. The problem might also be board-dependent and hence dealing with a Master quirk is simpler. b) parity Additional tests on a new platform with the Maxim 98373 amplifier showed a rare case where the parity interrupt is also thrown on startup, at the same time as bus clashes. This issue only seems to happen infrequently and was only observed during suspend-resume stress tests while audio is streaming. We could make the problem go away by adding a Slave-level quirk, but there is no evidence that the issue is actually a Slave problem: the parity is provided by the Master, which could also set an invalid parity in corner cases. BugLink: https://github.com/thesofproject/linux/issues/2578 BugLink: https://github.com/thesofproject/linux/issues/2533 Co-developed-by: Pierre-Louis Bossart Signed-off-by: Pierre-Louis Bossart Signed-off-by: Bard Liao Reviewed-by: Guennadi Liakhovetski Link: https://lore.kernel.org/r/20210302082720.12322-2-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul

soundwire: add override addr ops

2021-03-22T12:03:10+00:00

Platform firmware may have incorrect _ADR values causing the driver probes to fail. Add the override_ops, which when configured will allow for quirks based on DMI etc to override the addr values. Co-developed-by: Bard Liao Signed-off-by: Bard Liao Signed-off-by: Vinod Koul Reviewed-by: Rander Wang Reviewed-by: Guennadi Liakhovetski Link: https://lore.kernel.org/r/20210302075105.11515-2-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul

soundwire: export sdw_write/read_no_pm functions

2021-02-07T12:19:11+00:00

sdw_write_no_pm and sdw_read_no_pm are useful when we want to do IO without touching PM. Fixes: 0231453bc08f ('soundwire: bus: add clock stop helpers') Fixes: 60ee9be25571 ('soundwire: bus: add PM/no-PM versions of read/write functions') Signed-off-by: Bard Liao Link: https://lore.kernel.org/r/20210122070634.12825-5-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul

soundwire: SDCA: detect sdca_cascade interrupt

2020-11-24T08:39:31+00:00

The SoundWire 1.2 specification defines an "SDCA cascade" bit which handles a logical OR of all SDCA interrupt sources (up to 30 defined). Due to limitations of the addressing space, this bit is located in the SDW_DP0_INT register when DP0 is used, or alternatively in the DP0_SDCA_Support_INTSTAT register when DP0 is not used. To allow for both cases to be handled, this bit will be checked in the main device-level interrupt handling code. This will result in the register being read twice if DP0 is enabled, but it's not clear how to optimize this case. It's also more logical to deal with this interrupt at the device than the port level, this bit is really not DP0 specific and its location in the DP0_INTSTAT bit is only due to the lack of free space in SCP_INTSTAT_1. The SDCA_Cascade bit cannot be masked or cleared, so the interrupt handling only forwards the detection to the Slave driver, which will deal with reading the relevant SDCA status bits and clearing them. The bus driver only signals the detection. The communication with the Slave driver is based on the same interrupt callback, with only an extension to provide the status of the sdca_cascade bit. Signed-off-by: Pierre-Louis Bossart Reviewed-by: Rander Wang Reviewed-by: Guennadi Liakhovetski Signed-off-by: Bard Liao Link: https://lore.kernel.org/r/20201104152358.9518-1-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul

soundwire: enable Data Port test modes

2020-09-23T09:59:29+00:00

Test modes are required for all SoundWire IP, and help debug integration issues. In theory each port can be configured with a different mode but to simplify this patch only offers separate configurations for the Master and Slave ports - this covers 99% of the intended cases during platform integration. The test mode value is set via platform-specific ways. Signed-off-by: Pierre-Louis Bossart Reviewed-by: Guennadi Liakhovetski Reviewed-by: Rander Wang Signed-off-by: Bard Liao Link: https://lore.kernel.org/r/20200920193207.31241-2-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul

soundwire: Add generic bandwidth allocation algorithm

2020-09-18T12:18:51+00:00

This algorithm computes bus parameters like clock frequency, frame shape and port transport parameters based on active stream(s) running on the bus. Developers can also implement their own .compute_params() callback for specific resource management algorithm, and set if before calling sdw_add_bus_master() Credits: this patch is based on an earlier internal contribution by Vinod Koul, Sanyog Kale, Shreyas Nc and Hardik Shah. All hard-coded values were removed from the initial contribution to use BIOS information instead. Signed-off-by: Bard Liao Acked-by: Jaroslav Kysela Link: https://lore.kernel.org/r/20200908131520.5712-1-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul

soundwire: bus: use quirk to filter out invalid parity errors

2020-09-10T05:51:04+00:00

If a Slave device reports with a quirk that its initial parity check may be incorrect, filter it but keep the parity checks active in steady state. Signed-off-by: Pierre-Louis Bossart Signed-off-by: Bard Liao Reviewed-by: Kai Vehmanen Reviewed-by: Guennadi Liakhovetski Link: https://lore.kernel.org/r/20200908134521.6781-5-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul