kernel/linux.git/include/linux/soundwire/sdw.h, branch v5.11.6

soundwire: export sdw_write/read_no_pm functions

2021-03-04T11:15:08+00:00

[ Upstream commit 167790abb90fa073d8341ee0e408ccad3d2109cd ] sdw_write_no_pm and sdw_read_no_pm are useful when we want to do IO without touching PM. Fixes: 0231453bc08f ('soundwire: bus: add clock stop helpers') Fixes: 60ee9be25571 ('soundwire: bus: add PM/no-PM versions of read/write functions') Signed-off-by: Bard Liao Link: https://lore.kernel.org/r/20210122070634.12825-5-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

soundwire: SDCA: detect sdca_cascade interrupt

2020-11-24T08:39:31+00:00

The SoundWire 1.2 specification defines an "SDCA cascade" bit which handles a logical OR of all SDCA interrupt sources (up to 30 defined). Due to limitations of the addressing space, this bit is located in the SDW_DP0_INT register when DP0 is used, or alternatively in the DP0_SDCA_Support_INTSTAT register when DP0 is not used. To allow for both cases to be handled, this bit will be checked in the main device-level interrupt handling code. This will result in the register being read twice if DP0 is enabled, but it's not clear how to optimize this case. It's also more logical to deal with this interrupt at the device than the port level, this bit is really not DP0 specific and its location in the DP0_INTSTAT bit is only due to the lack of free space in SCP_INTSTAT_1. The SDCA_Cascade bit cannot be masked or cleared, so the interrupt handling only forwards the detection to the Slave driver, which will deal with reading the relevant SDCA status bits and clearing them. The bus driver only signals the detection. The communication with the Slave driver is based on the same interrupt callback, with only an extension to provide the status of the sdca_cascade bit. Signed-off-by: Pierre-Louis Bossart Reviewed-by: Rander Wang Reviewed-by: Guennadi Liakhovetski Signed-off-by: Bard Liao Link: https://lore.kernel.org/r/20201104152358.9518-1-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul

soundwire: enable Data Port test modes

2020-09-23T09:59:29+00:00

Test modes are required for all SoundWire IP, and help debug integration issues. In theory each port can be configured with a different mode but to simplify this patch only offers separate configurations for the Master and Slave ports - this covers 99% of the intended cases during platform integration. The test mode value is set via platform-specific ways. Signed-off-by: Pierre-Louis Bossart Reviewed-by: Guennadi Liakhovetski Reviewed-by: Rander Wang Signed-off-by: Bard Liao Link: https://lore.kernel.org/r/20200920193207.31241-2-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul

soundwire: Add generic bandwidth allocation algorithm

2020-09-18T12:18:51+00:00

This algorithm computes bus parameters like clock frequency, frame shape and port transport parameters based on active stream(s) running on the bus. Developers can also implement their own .compute_params() callback for specific resource management algorithm, and set if before calling sdw_add_bus_master() Credits: this patch is based on an earlier internal contribution by Vinod Koul, Sanyog Kale, Shreyas Nc and Hardik Shah. All hard-coded values were removed from the initial contribution to use BIOS information instead. Signed-off-by: Bard Liao Acked-by: Jaroslav Kysela Link: https://lore.kernel.org/r/20200908131520.5712-1-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul

soundwire: bus: use quirk to filter out invalid parity errors

2020-09-10T05:51:04+00:00

If a Slave device reports with a quirk that its initial parity check may be incorrect, filter it but keep the parity checks active in steady state. Signed-off-by: Pierre-Louis Bossart Signed-off-by: Bard Liao Reviewed-by: Kai Vehmanen Reviewed-by: Guennadi Liakhovetski Link: https://lore.kernel.org/r/20200908134521.6781-5-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul

soundwire: slave: add first_interrupt_done status

2020-09-10T05:51:04+00:00

Some Slaves report incorrect information in their interrupt status registers after a master/bus reset, track the initial interrupt handling so that quirks can be introduced to filter out incorrect information while keeping interrupts enabled in steady state. Signed-off-by: Pierre-Louis Bossart Signed-off-by: Bard Liao Reviewed-by: Kai Vehmanen Reviewed-by: Guennadi Liakhovetski Link: https://lore.kernel.org/r/20200908134521.6781-4-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul

ASoC/soundwire: bus: use property to set interrupt masks

2020-09-10T05:51:04+00:00

Add a slave-level property and program the SCP_INT1_MASK as desired by the codec driver. Since there is no DisCo property this has to be an implementation-specific firmware property or hard-coded in the driver. The only functionality change is that implementation-defined interrupts are no longer set for amplifiers - those interrupts are typically for jack detection or acoustic event detection/hotwording. Signed-off-by: Pierre-Louis Bossart Signed-off-by: Bard Liao Tested-by: Srinivas Kandagatla Reviewed-by: Kai Vehmanen Reviewed-by: Guennadi Liakhovetski Acked-by: Mark Brown Link: https://lore.kernel.org/r/20200908134521.6781-2-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul

soundwire: define and use addr bit masks

2020-09-04T09:16:41+00:00

Soundwire addr is a 52bit value encoding link, version, unique id, mfg id, part id and class id. Define bit masks for these and use FIELD_GET() to extract these fields. Signed-off-by: Vinod Koul Tested-by: Bard Liao Link: https://lore.kernel.org/r/20200903114504.1202143-2-vkoul@kernel.org Signed-off-by: Vinod Koul

soundwire: bus: update multi-link definition with hw sync details

2020-09-03T10:44:39+00:00

Hardware-based synchronization is typically required when the bus->multi_link flag is set. On Intel platforms, when the Cadence IP is configured in 'Multi Master Mode', the hardware synchronization is required even when a stream only uses a single segment. The existing code only deal with hardware synchronization when a stream uses more than one segment so to remain backwards compatible we add a configuration threshold. For Intel cases this threshold will be set to one, other platforms may be able to use the SSP-based sync in those cases. Signed-off-by: Pierre-Louis Bossart Signed-off-by: Bard Liao Link: https://lore.kernel.org/r/20200901150556.19432-6-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul

soundwire: fix port_ready[] dynamic allocation in mipi_disco

2020-09-03T10:32:29+00:00

The existing code allocates memory for the total number of ports. This only works if the ports are contiguous, but will break if e.g. a Devices uses port0, 1, and 14. The port_ready[] array would contain 3 elements, which would lead to an out-of-bounds access. Conversely in other cases, the wrong port index would be used leading to timeouts on prepare. This can be fixed by allocating for the worst-case of 15 ports (DP0..DP14). In addition since the number is now fixed, we can use an array instead of a dynamic allocation. Signed-off-by: Pierre-Louis Bossart Signed-off-by: Bard Liao Reviewed-by: Rander Wang Reviewed-by: Guennadi Liakhovetski Link: https://lore.kernel.org/r/20200831134318.11443-4-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul