kernel/linux.git/include/linux/sched, branch v5.15.45

mm, hugetlb: allow for "high" userspace addresses

2022-04-27T12:38:57+00:00

commit 5f24d5a579d1eace79d505b148808a850b417d4c upstream. This is a fix for commit f6795053dac8 ("mm: mmap: Allow for "high" userspace addresses") for hugetlb. This patch adds support for "high" userspace addresses that are optionally supported on the system and have to be requested via a hint mechanism ("high" addr parameter to mmap). Architectures such as powerpc and x86 achieve this by making changes to their architectural versions of hugetlb_get_unmapped_area() function. However, arm64 uses the generic version of that function. So take into account arch_get_mmap_base() and arch_get_mmap_end() in hugetlb_get_unmapped_area(). To allow that, move those two macros out of mm/mmap.c into include/linux/sched/mm.h If these macros are not defined in architectural code then they default to (TASK_SIZE) and (base) so should not introduce any behavioural changes to architectures that do not define them. For the time being, only ARM64 is affected by this change. Catalin (ARM64) said "We should have fixed hugetlb_get_unmapped_area() as well when we added support for 52-bit VA. The reason for commit f6795053dac8 was to prevent normal mmap() from returning addresses above 48-bit by default as some user-space had hard assumptions about this. It's a slight ABI change if you do this for hugetlb_get_unmapped_area() but I doubt anyone would notice. It's more likely that the current behaviour would cause issues, so I'd rather have them consistent. Basically when arm64 gained support for 52-bit addresses we did not want user-space calling mmap() to suddenly get such high addresses, otherwise we could have inadvertently broken some programs (similar behaviour to x86 here). Hence we added commit f6795053dac8. But we missed hugetlbfs which could still get such high mmap() addresses. So in theory that's a potential regression that should have bee addressed at the same time as commit f6795053dac8 (and before arm64 enabled 52-bit addresses)" Link: https://lkml.kernel.org/r/ab847b6edb197bffdfe189e70fb4ac76bfe79e0d.1650033747.git.christophe.leroy@csgroup.eu Fixes: f6795053dac8 ("mm: mmap: Allow for "high" userspace addresses") Signed-off-by: Christophe Leroy Reviewed-by: Catalin Marinas Cc: Steve Capper Cc: Will Deacon Cc: [5.0.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

sched: Fix yet more sched_fork() races

2022-03-08T18:12:49+00:00

commit b1e8206582f9d680cff7d04828708c8b6ab32957 upstream. Where commit 4ef0c5c6b5ba ("kernel/sched: Fix sched_fork() access an invalid sched_task_group") fixed a fork race vs cgroup, it opened up a race vs syscalls by not placing the task on the runqueue before it gets exposed through the pidhash. Commit 13765de8148f ("sched/fair: Fix fault in reweight_entity") is trying to fix a single instance of this, instead fix the whole class of issues, effectively reverting this commit. Fixes: 4ef0c5c6b5ba ("kernel/sched: Fix sched_fork() access an invalid sched_task_group") Reported-by: Linus Torvalds Signed-off-by: Peter Zijlstra (Intel) Tested-by: Tadeusz Struk Tested-by: Zhang Qiao Tested-by: Dietmar Eggemann Link: https://lkml.kernel.org/r/YgoeCbwj5mbCR0qA@hirez.programming.kicks-ass.net Signed-off-by: Greg Kroah-Hartman

signal: Replace force_fatal_sig with force_exit_sig when in doubt

2021-11-25T08:49:07+00:00

commit fcb116bc43c8c37c052530ead79872f8b2615711 upstream. Recently to prevent issues with SECCOMP_RET_KILL and similar signals being changed before they are delivered SA_IMMUTABLE was added. Unfortunately this broke debuggers[1][2] which reasonably expect to be able to trap synchronous SIGTRAP and SIGSEGV even when the target process is not configured to handle those signals. Add force_exit_sig and use it instead of force_fatal_sig where historically the code has directly called do_exit. This has the implementation benefits of going through the signal exit path (including generating core dumps) without the danger of allowing userspace to ignore or change these signals. This avoids userspace regressions as older kernels exited with do_exit which debuggers also can not intercept. In the future is should be possible to improve the quality of implementation of the kernel by changing some of these force_exit_sig calls to force_fatal_sig. That can be done where it matters on a case-by-case basis with careful analysis. Reported-by: Kyle Huey Reported-by: kernel test robot [1] https://lkml.kernel.org/r/CAP045AoMY4xf8aC_4QU_-j7obuEPYgTcnQQP3Yxk=2X90jtpjw@mail.gmail.com [2] https://lkml.kernel.org/r/20211117150258.GB5403@xsang-OptiPlex-9020 Fixes: 00b06da29cf9 ("signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed") Fixes: a3616a3c0272 ("signal/m68k: Use force_sigsegv(SIGSEGV) in fpsp040_die") Fixes: 83a1f27ad773 ("signal/powerpc: On swapcontext failure force SIGSEGV") Fixes: 9bc508cf0791 ("signal/s390: Use force_sigsegv in default_trap_handler") Fixes: 086ec444f866 ("signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig") Fixes: c317d306d550 ("signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails") Fixes: 695dd0d634df ("signal/x86: In emulate_vsyscall force a signal instead of calling do_exit") Fixes: 1fbd60df8a85 ("signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.") Fixes: 941edc5bf174 ("exit/syscall_user_dispatch: Send ordinary signals on failure") Link: https://lkml.kernel.org/r/871r3dqfv8.fsf_-_@email.froward.int.ebiederm.org Reviewed-by: Kees Cook Tested-by: Kees Cook Tested-by: Kyle Huey Signed-off-by: "Eric W. Biederman" Cc: Thomas Backlund Signed-off-by: Greg Kroah-Hartman

signal: Implement force_fatal_sig

2021-11-25T08:49:06+00:00

commit 26d5badbccddcc063dc5174a2baffd13a23322aa upstream. Add a simple helper force_fatal_sig that causes a signal to be delivered to a process as if the signal handler was set to SIG_DFL. Reimplement force_sigsegv based upon this new helper. This fixes force_sigsegv so that when it forces the default signal handler to be used the code now forces the signal to be unblocked as well. Reusing the tested logic in force_sig_info_to_task that was built for force_sig_seccomp this makes the implementation trivial. This is interesting both because it makes force_sigsegv simpler and because there are a couple of buggy places in the kernel that call do_exit(SIGILL) or do_exit(SIGSYS) because there is no straight forward way today for those places to simply force the exit of a process with the chosen signal. Creating force_fatal_sig allows those places to be implemented with normal signal exits. Link: https://lkml.kernel.org/r/20211020174406.17889-13-ebiederm@xmission.com Signed-off-by: Eric W. Biederman Cc: Thomas Backlund Signed-off-by: Greg Kroah-Hartman

shm: extend forced shm destroy to support objects from several IPC nses

2021-11-25T08:48:42+00:00

commit 85b6d24646e4125c591639841169baa98a2da503 upstream. Currently, the exit_shm() function not designed to work properly when task->sysvshm.shm_clist holds shm objects from different IPC namespaces. This is a real pain when sysctl kernel.shm_rmid_forced = 1, because it leads to use-after-free (reproducer exists). This is an attempt to fix the problem by extending exit_shm mechanism to handle shm's destroy from several IPC ns'es. To achieve that we do several things: 1. add a namespace (non-refcounted) pointer to the struct shmid_kernel 2. during new shm object creation (newseg()/shmget syscall) we initialize this pointer by current task IPC ns 3. exit_shm() fully reworked such that it traverses over all shp's in task->sysvshm.shm_clist and gets IPC namespace not from current task as it was before but from shp's object itself, then call shm_destroy(shp, ns). Note: We need to be really careful here, because as it was said before (1), our pointer to IPC ns non-refcnt'ed. To be on the safe side we using special helper get_ipc_ns_not_zero() which allows to get IPC ns refcounter only if IPC ns not in the "state of destruction". Q/A Q: Why can we access shp->ns memory using non-refcounted pointer? A: Because shp object lifetime is always shorther than IPC namespace lifetime, so, if we get shp object from the task->sysvshm.shm_clist while holding task_lock(task) nobody can steal our namespace. Q: Does this patch change semantics of unshare/setns/clone syscalls? A: No. It's just fixes non-covered case when process may leave IPC namespace without getting task->sysvshm.shm_clist list cleaned up. Link: https://lkml.kernel.org/r/67bb03e5-f79c-1815-e2bf-949c67047418@colorfullife.com Link: https://lkml.kernel.org/r/20211109151501.4921-1-manfred@colorfullife.com Fixes: ab602f79915 ("shm: make exit_shm work proportional to task activity") Co-developed-by: Manfred Spraul Signed-off-by: Manfred Spraul Signed-off-by: Alexander Mikhalitsyn Cc: "Eric W. Biederman" Cc: Davidlohr Bueso Cc: Greg KH Cc: Andrei Vagin Cc: Pavel Tikhomirov Cc: Vasily Averin Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

kernel/sched: Fix sched_fork() access an invalid sched_task_group

2021-11-18T18:16:32+00:00

[ Upstream commit 4ef0c5c6b5ba1f38f0ea1cedad0cad722f00c14a ] There is a small race between copy_process() and sched_fork() where child->sched_task_group point to an already freed pointer. parent doing fork() | someone moving the parent | to another cgroup -------------------------------+------------------------------- copy_process() + dup_task_struct()<1> parent move to another cgroup, and free the old cgroup. <2> + sched_fork() + __set_task_cpu()<3> + task_fork_fair() + sched_slice()<4> In the worst case, this bug can lead to "use-after-free" and cause panic as shown above: (1) parent copy its sched_task_group to child at <1>; (2) someone move the parent to another cgroup and free the old cgroup at <2>; (3) the sched_task_group and cfs_rq that belong to the old cgroup will be accessed at <3> and <4>, which cause a panic: [] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [] PGD 8000001fa0a86067 P4D 8000001fa0a86067 PUD 2029955067 PMD 0 [] Oops: 0000 [#1] SMP PTI [] CPU: 7 PID: 648398 Comm: ebizzy Kdump: loaded Tainted: G OE --------- - - 4.18.0.x86_64+ #1 [] RIP: 0010:sched_slice+0x84/0xc0 [] Call Trace: [] task_fork_fair+0x81/0x120 [] sched_fork+0x132/0x240 [] copy_process.part.5+0x675/0x20e0 [] ? __handle_mm_fault+0x63f/0x690 [] _do_fork+0xcd/0x3b0 [] do_syscall_64+0x5d/0x1d0 [] entry_SYSCALL_64_after_hwframe+0x65/0xca [] RIP: 0033:0x7f04418cd7e1 Between cgroup_can_fork() and cgroup_post_fork(), the cgroup membership and thus sched_task_group can't change. So update child's sched_task_group at sched_post_fork() and move task_fork() and __set_task_cpu() (where accees the sched_task_group) from sched_fork() to sched_post_fork(). Fixes: 8323f26ce342 ("sched: Fix race in task_group") Signed-off-by: Zhang Qiao Signed-off-by: Peter Zijlstra (Intel) Acked-by: Tejun Heo Link: https://lkml.kernel.org/r/20210915064030.2231-1-zhangqiao22@huawei.com Signed-off-by: Sasha Levin

task_stack: Fix end_of_stack() for architectures with upwards-growing stack

2021-11-18T18:16:21+00:00

[ Upstream commit 9cc2fa4f4a92ccc6760d764e7341be46ee8aaaa1 ] The function end_of_stack() returns a pointer to the last entry of a stack. For architectures like parisc where the stack grows upwards return the pointer to the highest address in the stack. Without this change I faced a crash on parisc, because the stackleak functionality wrote STACKLEAK_POISON to the lowest address and thus overwrote the first 4 bytes of the task_struct which included the TIF_FLAGS. Signed-off-by: Helge Deller Signed-off-by: Sasha Levin

Merge branch 'akpm' (patches from Andrew)

2021-09-08T19:55:35+00:00

Merge more updates from Andrew Morton: "147 patches, based on 7d2a07b769330c34b4deabeed939325c77a7ec2f. Subsystems affected by this patch series: mm (memory-hotplug, rmap, ioremap, highmem, cleanups, secretmem, kfence, damon, and vmscan), alpha, percpu, procfs, misc, core-kernel, MAINTAINERS, lib, checkpatch, epoll, init, nilfs2, coredump, fork, pids, criu, kconfig, selftests, ipc, and scripts" * emailed patches from Andrew Morton : (94 commits) scripts: check_extable: fix typo in user error message mm/workingset: correct kernel-doc notations ipc: replace costly bailout check in sysvipc_find_ipc() selftests/memfd: remove unused variable Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH configs: remove the obsolete CONFIG_INPUT_POLLDEV prctl: allow to setup brk for et_dyn executables pid: cleanup the stale comment mentioning pidmap_init(). kernel/fork.c: unexport get_{mm,task}_exe_file coredump: fix memleak in dump_vma_snapshot() fs/coredump.c: log if a core dump is aborted due to changed file permissions nilfs2: use refcount_dec_and_lock() to fix potential UAF nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group nilfs2: fix NULL pointer in nilfs_##name##_attr_release nilfs2: fix memory leak in nilfs_sysfs_create_device_group trap: cleanup trap_init() init: move usermodehelper_enable() to populate_rootfs() ...

fs/epoll: use a per-cpu counter for user's watches count

2021-09-08T18:50:27+00:00

This counter tracks the number of watches a user has, to compare against the 'max_user_watches' limit. This causes a scalability bottleneck on SPECjbb2015 on large systems as there is only one user. Changing to a per-cpu counter increases throughput of the benchmark by about 30% on a 16-socket, > 1000 thread system. [rdunlap@infradead.org: fix build errors in kernel/user.c when CONFIG_EPOLL=n] [npiggin@gmail.com: move ifdefs into wrapper functions, slightly improve panic message] Link: https://lkml.kernel.org/r/1628051945.fens3r99ox.astroid@bobo.none [akpm@linux-foundation.org: tweak user_epoll_alloc(), per Guenter] Link: https://lkml.kernel.org/r/20210804191421.GA1900577@roeck-us.net Link: https://lkml.kernel.org/r/20210802032013.2751916-1-npiggin@gmail.com Signed-off-by: Nicholas Piggin Reported-by: Anton Blanchard Cc: Alexander Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge branch 'akpm' (patches from Andrew)

2021-09-03T17:08:28+00:00

Merge misc updates from Andrew Morton: "173 patches. Subsystems affected by this series: ia64, ocfs2, block, and mm (debug, pagecache, gup, swap, shmem, memcg, selftests, pagemap, mremap, bootmem, sparsemem, vmalloc, kasan, pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, compaction, mempolicy, memblock, oom-kill, migration, ksm, percpu, vmstat, and madvise)" * emailed patches from Andrew Morton : (173 commits) mm/madvise: add MADV_WILLNEED to process_madvise() mm/vmstat: remove unneeded return value mm/vmstat: simplify the array size calculation mm/vmstat: correct some wrong comments mm/percpu,c: remove obsolete comments of pcpu_chunk_populated() selftests: vm: add COW time test for KSM pages selftests: vm: add KSM merging time test mm: KSM: fix data type selftests: vm: add KSM merging across nodes test selftests: vm: add KSM zero page merging test selftests: vm: add KSM unmerge test selftests: vm: add KSM merge test mm/migrate: correct kernel-doc notation mm: wire up syscall process_mrelease mm: introduce process_mrelease system call memblock: make memblock_find_in_range method private mm/mempolicy.c: use in_task() in mempolicy_slab_node() mm/mempolicy: unify the create() func for bind/interleave/prefer-many policies mm/mempolicy: advertise new MPOL_PREFERRED_MANY mm/hugetlb: add support for mempolicy MPOL_PREFERRED_MANY ...