kernel/linux.git/include/linux/sched.h, branch v4.14.223

signal: Extend exec_id to 64bits

2020-04-24T06:00:38+00:00

commit d1e7fd6462ca9fc76650fbe6ca800e35b24267da upstream. Replace the 32bit exec_id with a 64bit exec_id to make it impossible to wrap the exec_id counter. With care an attacker can cause exec_id wrap and send arbitrary signals to a newly exec'd parent. This bypasses the signal sending checks if the parent changes their credentials during exec. The severity of this problem can been seen that in my limited testing of a 32bit exec_id it can take as little as 19s to exec 65536 times. Which means that it can take as little as 14 days to wrap a 32bit exec_id. Adam Zabrocki has succeeded wrapping the self_exe_id in 7 days. Even my slower timing is in the uptime of a typical server. Which means self_exec_id is simply a speed bump today, and if exec gets noticably faster self_exec_id won't even be a speed bump. Extending self_exec_id to 64bits introduces a problem on 32bit architectures where reading self_exec_id is no longer atomic and can take two read instructions. Which means that is is possible to hit a window where the read value of exec_id does not match the written value. So with very lucky timing after this change this still remains expoiltable. I have updated the update of exec_id on exec to use WRITE_ONCE and the read of exec_id in do_notify_parent to use READ_ONCE to make it clear that there is no locking between these two locations. Link: https://lore.kernel.org/kernel-hardening/20200324215049.GA3710@pi3.com.pl Fixes: 2.3.23pre2 Cc: stable@vger.kernel.org Signed-off-by: "Eric W. Biederman" Signed-off-by: Greg Kroah-Hartman

futex: Add mutex around futex exit

2019-12-05T14:38:28+00:00

commit 3f186d974826847a07bc7964d79ec4eded475ad9 upstream. The mutex will be used in subsequent changes to replace the busy looping of a waiter when the futex owner is currently executing the exit cleanup to prevent a potential live lock. Signed-off-by: Thomas Gleixner Reviewed-by: Ingo Molnar Acked-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/20191106224556.845798895@linutronix.de Signed-off-by: Greg Kroah-Hartman

futex: Replace PF_EXITPIDONE with a state

2019-12-05T14:38:23+00:00

commit 3d4775df0a89240f671861c6ab6e8d59af8e9e41 upstream. The futex exit handling relies on PF_ flags. That's suboptimal as it requires a smp_mb() and an ugly lock/unlock of the exiting tasks pi_lock in the middle of do_exit() to enforce the observability of PF_EXITING in the futex code. Add a futex_state member to task_struct and convert the PF_EXITPIDONE logic over to the new state. The PF_EXITING dependency will be cleaned up in a later step. This prepares for handling various futex exit issues later. Signed-off-by: Thomas Gleixner Reviewed-by: Ingo Molnar Acked-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/20191106224556.149449274@linutronix.de Signed-off-by: Greg Kroah-Hartman

x86/speculation: Add prctl() control for indirect branch speculation

2018-12-05T18:41:22+00:00

commit 9137bb27e60e554dab694eafa4cca241fa3a694f upstream Add the PR_SPEC_INDIRECT_BRANCH option for the PR_GET_SPECULATION_CTRL and PR_SET_SPECULATION_CTRL prctls to allow fine grained per task control of indirect branch speculation via STIBP and IBPB. Invocations: Check indirect branch speculation status with - prctl(PR_GET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, 0, 0, 0); Enable indirect branch speculation with - prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_ENABLE, 0, 0); Disable indirect branch speculation with - prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_DISABLE, 0, 0); Force disable indirect branch speculation with - prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_FORCE_DISABLE, 0, 0); See Documentation/userspace-api/spec_ctrl.rst. Signed-off-by: Tim Chen Signed-off-by: Thomas Gleixner Reviewed-by: Ingo Molnar Cc: Peter Zijlstra Cc: Andy Lutomirski Cc: Linus Torvalds Cc: Jiri Kosina Cc: Tom Lendacky Cc: Josh Poimboeuf Cc: Andrea Arcangeli Cc: David Woodhouse Cc: Andi Kleen Cc: Dave Hansen Cc: Casey Schaufler Cc: Asit Mallick Cc: Arjan van de Ven Cc: Jon Masters Cc: Waiman Long Cc: Greg KH Cc: Dave Stewart Cc: Kees Cook Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20181125185005.866780996@linutronix.de Signed-off-by: Greg Kroah-Hartman

sched/core: Introduce set_special_state()

2018-06-20T19:02:54+00:00

[ Upstream commit b5bf9a90bbebffba888c9144c5a8a10317b04064 ] Gaurav reported a perceived problem with TASK_PARKED, which turned out to be a broken wait-loop pattern in __kthread_parkme(), but the reported issue can (and does) in fact happen for states that do not do condition based sleeps. When the 'current->state = TASK_RUNNING' store of a previous (concurrent) try_to_wake_up() collides with the setting of a 'special' sleep state, we can loose the sleep state. Normal condition based wait-loops are immune to this problem, but for sleep states that are not condition based are subject to this problem. There already is a fix for TASK_DEAD. Abstract that and also apply it to TASK_STOPPED and TASK_TRACED, both of which are also without condition based wait-loop. Reported-by: Gaurav Kohli Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Oleg Nesterov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

prctl: Add force disable speculation

2018-05-22T16:54:04+00:00

commit 356e4bfff2c5489e016fdb925adbf12a1e3950ee upstream For certain use cases it is desired to enforce mitigations so they cannot be undone afterwards. That's important for loader stubs which want to prevent a child from disabling the mitigation again. Will also be used for seccomp(). The extra state preserving of the prctl state for SSB is a preparatory step for EBPF dymanic speculation control. Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

exec: avoid gcc-8 warning for get_task_comm

2018-03-03T09:24:21+00:00

[ Upstream commit 3756f6401c302617c5e091081ca4d26ab604bec5 ] gcc-8 warns about using strncpy() with the source size as the limit: fs/exec.c:1223:32: error: argument to 'sizeof' in 'strncpy' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess] This is indeed slightly suspicious, as it protects us from source arguments without NUL-termination, but does not guarantee that the destination is terminated. This keeps the strncpy() to ensure we have properly padded target buffer, but ensures that we use the correct length, by passing the actual length of the destination buffer as well as adding a build-time check to ensure it is exactly TASK_COMM_LEN. There are only 23 callsites which I all reviewed to ensure this is currently the case. We could get away with doing only the check or passing the right length, but it doesn't hurt to do both. Link: http://lkml.kernel.org/r/20171205151724.1764896-1-arnd@arndb.de Signed-off-by: Arnd Bergmann Suggested-by: Kees Cook Acked-by: Kees Cook Acked-by: Ingo Molnar Cc: Alexander Viro Cc: Peter Zijlstra Cc: Serge Hallyn Cc: James Morris Cc: Aleksa Sarai Cc: "Eric W. Biederman" Cc: Frederic Weisbecker Cc: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

sched/debug: Add explicit TASK_PARKED printing

2017-09-29T09:02:57+00:00

Currently TASK_PARKED is masqueraded as TASK_INTERRUPTIBLE, give it its own print state because it will not in fact get woken by regular wakeups and is a long-term state. This requires moving TASK_PARKED into the TASK_REPORT mask, and since that latter needs to be a contiguous bitmask, we need to shuffle the bits around a bit. Signed-off-by: Peter Zijlstra (Intel) Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar

sched/debug: Add explicit TASK_IDLE printing

2017-09-29T09:02:56+00:00

Markus reported that kthreads that idle using TASK_IDLE instead of TASK_INTERRUPTIBLE are reported in as TASK_UNINTERRUPTIBLE and things like htop mark those red. This is undesirable, so add an explicit state for TASK_IDLE. Reported-by: Markus Trippelsdorf Signed-off-by: Peter Zijlstra (Intel) Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar