kernel/linux.git/include/linux/regulator/driver.h, branch v4.11.8

regulator: core: Add new API to poll for error conditions

2016-11-04T18:15:25+00:00

Regulator consumers can receive event notifications when errors are reported to the driver, but currently, there is no way for a regulator consumer to know when the error is over. To allow a regulator consumer to poll for error conditions add a new API: regulator_get_error_flags. Signed-off-by: Axel Haslam Signed-off-by: Mark Brown

regulator: core: Add set_voltage_time op

2016-09-16T17:38:22+00:00

The new op is analogous to set_voltage_time_sel. It can be used by regulators which don't have a table of discrete voltages. The function returns the time for the regulator output voltage to stabilize after being set to a new value, in microseconds. If the op is not set a default implementation is used to calculate the delay. This change also removes the ramp_delay calculation in the PWM regulator, since the driver now uses the core code for the calculation of the delay. Signed-off-by: Matthias Kaehlcke Signed-off-by: Mark Brown

Merge remote-tracking branches 'regulator/topic/can-change', 'regulator/topic/constrain', 'regulator/topic/debugfs' and 'regulator/topic/doc' into regulator-next

2016-05-13T13:23:27+00:00

regulator: core: Use a bitfield for continuous_voltage_range

2016-04-20T16:38:52+00:00

Using a bitfield enables the compiler to lay out the structure more efficiently when we have other boolean flags since multiple values can be included in a single byte. Signed-off-by: Mark Brown

regulator: add missing description for set_over_current_protection

2016-03-23T13:38:23+00:00

Over current protection is missing descriptions for documentation. Signed-off-by: Luis de Bethencourt Signed-off-by: Mark Brown

regulator: add missing descriptions in regulator_desc

2016-03-23T13:38:19+00:00

Members csel_reg and csel_mask of the regulator_desc struct are missing descriptions for documentation. Adding them. Signed-off-by: Luis de Bethencourt Signed-off-by: Mark Brown

regulator: helper: Add helper to configure active-discharge using regmap

2016-03-02T14:13:05+00:00

Add helper function to set the state of active-discharge of regulator using regmap. The HW regulator driver can directly use this by providing the necessary information in the regulator descriptor. Signed-off-by: Laxman Dewangan Signed-off-by: Mark Brown

regulator: core: Add support for active-discharge configuration

2016-03-02T14:13:05+00:00

Add support to enable/disable active discharge of regulator via machine constraints. This configuration is done when setting machine constraint during regulator register and if regulator driver implemented the callback ops. Signed-off-by: Laxman Dewangan Signed-off-by: Mark Brown

regulator: tps65218: add support for LS3 current regulator

2015-11-25T12:25:26+00:00

Add support for TPS65218 LS3 current regulator, which is capable of 4 current input limit modes: 100, 200, 500, and 1000 uA. Signed-off-by: Nikita Kiryanov Signed-off-by: Mark Brown

regulator: introduce min_dropout_uV

2015-10-16T16:57:33+00:00

Many voltage Regulators need a input voltage that is higher than the output voltage. Allow to specify a minimum dropout voltage which will be used later to find the best input voltage for regulators. [Changed uv to uV for consistency and legibility -- broonie] Signed-off-by: Sascha Hauer Signed-off-by: Mark Brown