kernel/linux.git/include/linux/regulator/consumer.h, branch v6.13.2

regulator: Move OF_ API declarations/definitions outside CONFIG_REGULATOR

2025-01-06T13:04:34+00:00

Since these are hidden inside CONFIG_REGULATOR, building the consumer drivers without CONFIG_REGULATOR will result in the following build error: >> drivers/pci/pwrctrl/slot.c:39:15: error: implicit declaration of function 'of_regulator_bulk_get_all'; did you mean 'regulator_bulk_get'? [-Werror=implicit-function-declaration] 39 | ret = of_regulator_bulk_get_all(dev, dev_of_node(dev), | ^~~~~~~~~~~~~~~~~~~~~~~~~ | regulator_bulk_get cc1: some warnings being treated as errors This also removes the duplicated definitions that were possibly added to fix the build issues. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202501020407.HmQQQKa0-lkp@intel.com/ Fixes: 27b9ecc7a9ba ("regulator: Add of_regulator_bulk_get_all") Signed-off-by: Manivannan Sadhasivam Link: https://patch.msgid.link/20250104115058.19216-3-manivannan.sadhasivam@linaro.org Signed-off-by: Mark Brown

regulator: Guard of_regulator_bulk_get_all() with CONFIG_OF

2025-01-06T13:04:33+00:00

Since the definition is in drivers/regulator/of_regulator.c and compiled only if CONFIG_OF is enabled, building the consumer driver without CONFIG_OF and with CONFIG_REGULATOR will result in below build error: ERROR: modpost: "of_regulator_bulk_get_all" [drivers/pci/pwrctrl/pci-pwrctl-slot.ko] undefined! Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202412181640.12Iufkvd-lkp@intel.com/ Fixes: 27b9ecc7a9ba ("regulator: Add of_regulator_bulk_get_all") Signed-off-by: Manivannan Sadhasivam Reviewed-by: Bartosz Golaszewski Link: https://patch.msgid.link/20250104115058.19216-2-manivannan.sadhasivam@linaro.org Signed-off-by: Mark Brown

regulator: Add devres version of of_regulator_get_optional()

2024-09-29T23:11:41+00:00

There are existing uses for a devres version of of_regulator_get_optional() in power domain drivers. On MediaTek platforms, power domains may have regulator supplies tied to them. The driver currently tries to use devm_regulator_get() to not have to manage the lifecycle, but ends up doing it in a very hacky way by replacing the device node of the power domain controller device to the device node of the power domain that is currently being registered, getting the supply, and reverting the device node. Provide a better API so that the hack can be replaced. Signed-off-by: Chen-Yu Tsai Link: https://patch.msgid.link/20240925093807.1026949-3-wenst@chromium.org Signed-off-by: Mark Brown

regulator: Add of_regulator_get_optional() for pure DT regulator lookup

2024-09-29T23:11:40+00:00

The to-be-introduced I2C component prober needs to enable regulator supplies (and toggle GPIO pins) for the various components it intends to probe. To support this, a new "pure DT lookup" method for getting regulator supplies is needed, since the device normally requesting the supply won't get created until after the component is probed to be available. Add a new of_regulator_get_optional() function for this. This mirrors the existing regulator_get_optional() function, but is OF-specific. The underlying code that supports the existing regulator_get*() functions has been reworked in previous patches to support this specific case. Also convert an existing usage of "dev && dev->of_node" to "dev_of_node(dev)". Link: https://lore.kernel.org/all/20231220203537.83479-2-jernej.skrabec@gmail.com/ [1] Signed-off-by: Chen-Yu Tsai Link: https://patch.msgid.link/20240925093807.1026949-2-wenst@chromium.org Reviewed-by: Andy Shevchenko Signed-off-by: Mark Brown

regulator: core: Stub devm_regulator_bulk_get_const() if !CONFIG_REGULATOR

2024-08-30T14:43:52+00:00

When adding devm_regulator_bulk_get_const() I missed adding a stub for when CONFIG_REGULATOR is not enabled. Under certain conditions (like randconfig testing) this can cause the compiler to reports errors like: error: implicit declaration of function 'devm_regulator_bulk_get_const'; did you mean 'devm_regulator_bulk_get_enable'? Add the stub. Fixes: 1de452a0edda ("regulator: core: Allow drivers to define their init data as const") Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202408301813.TesFuSbh-lkp@intel.com/ Cc: Neil Armstrong Signed-off-by: Douglas Anderson Link: https://patch.msgid.link/20240830073511.1.Ib733229a8a19fad8179213c05e1af01b51e42328@changeid Signed-off-by: Mark Brown

Add USB VBUS regulator for RZ/G2L

2024-06-26T19:09:28+00:00

Merge series from Biju Das : As per RZ/G2L HW manual, VBUS enable can be controlled by the VBOUT bit of the VBUS Control Register(VBENCTL) register in the USBPHY Control. But this IP is in the Reset block. Reset driver exposes this register as regmap and instantiate the USB VBUS regulator device. Consumers(phy device) can use regulator APIs to control VBUS as controlling is done in the atomic context using a new API which is added for the purpose.

regulator: core: Add helper for allow HW access to enable/disable regulator

2024-06-26T17:17:05+00:00

Add a helper function that allow regulator consumers to allow low-level HW access, in order to enable/disable regulator in atomic context. The use-case for RZ/G2L SoC is to enable VBUS selection register based on vbus detection that happens in interrupt context. Signed-off-by: Biju Das Link: https://patch.msgid.link/20240616105402.45211-4-biju.das.jz@bp.renesas.com Signed-off-by: Mark Brown

regulator: consumer: Reorder fields in 'struct regulator_bulk_data'

2024-05-27T00:32:51+00:00

Based on pahole, 2 holes can be combined in 'struct regulator_bulk_data'. On x86_64 and allmodconfig, this shrinks the size of the structure from 32 to 24 bytes. This is usually a win, because this structure is often used for static global variables. As an example: Before: text data bss dec hex filename 3557 162 0 3719 e87 drivers/gpu/drm/msm/dsi/dsi_cfg.o After: text data bss dec hex filename 3477 162 0 3639 e37 drivers/gpu/drm/msm/dsi/dsi_cfg.o Signed-off-by: Christophe JAILLET Link: https://msgid.link/r/35c4edf2dbc6d4f24fb771341ded2989ae32f779.1715512259.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown

Merge tag 'regulator-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

2024-05-14T21:36:09+00:00

Pull regulator updates from Mark Brown: "There's one API update here, a new API factoring out a common pattern for reference voltage supplies. These are supplies used as a reference by analogue circuits where the consumer requests and enables the supply, reads the voltage to calibrate the user and then never touches it again. This is factored out into a single operation which just returns the voltage and uses devm_ to manage the request and enable portion. Otherwise this has been a very quiet release, we've got some new device support, some small fixes, housekeeping and cleanup work but nothing substantial. There's also some non-regulator changes in here, a number of users for the new reference voltage API were merged along with it and some MFD changes were pulled in as dependencies for new driver work. Highlights: - Add a new API for single operation handling of reference voltages - Support for Allwinner AXP717 and D1, and NXP PCA9561A" * tag 'regulator-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (33 commits) regulator: sun20i: Add Allwinner D1 LDOs driver regulator: dt-bindings: Add Allwinner D1 system LDOs regulator: Mention regulator id in error message about dummy supplies staging: iio: impedance-analyzer: ad5933: Use devm_regulator_get_enable_read_voltage() iio: frequency: admv1013: Use devm_regulator_get_enable_read_voltage() iio: addac: ad74115: Use devm_regulator_get_enable_read_voltage() hwmon: (adc128d818) simplify final return in probe regulator: devres: fix devm_regulator_get_enable_read_voltage() return hwmon: (da9052) Use devm_regulator_get_enable_read_voltage() hwmon: (adc128d818) Use devm_regulator_get_enable_read_voltage() regulator: devres: add API for reference voltage supplies regulator: rtq2208: Fix LDO discharge register and add vsel setting regulator: dt-bindings: fixed-regulator: Add a preferred node name regulator: axp20x: add support for the AXP717 mfd: axp20x: Add support for AXP717 PMIC dt-bindings: mfd: x-powers,axp152: Document AXP717 regulator: axp20x: fix typo-ed identifier dt-bindings: regulator: qcom,usb-vbus-regulator: Add PM7250B compatible regulator: pca9450: add pca9451a support regulator: dt-bindings: pca9450: add pca9451a support ...

regulator: devres: add API for reference voltage supplies

2024-05-03T02:08:12+00:00

A common use case for regulators is to supply a reference voltage to an analog input or output device. This adds a new devres API to get, enable, and get the voltage in a single call. This allows eliminating boilerplate code in drivers that use reference supplies in this way. Signed-off-by: David Lechner Link: https://lore.kernel.org/r/20240429-regulator-get-enable-get-votlage-v2-1-b1f11ab766c1@baylibre.com Signed-off-by: Mark Brown