kernel/linux.git/include/linux/platform_data, branch v6.4.15

ARM/mmc: Convert old mmci-omap to GPIO descriptors

2023-07-19T14:35:47+00:00

[ Upstream commit e519f0bb64efc2c9c8b67bb2d114dda458bdc34d ] A recent change to the OMAP driver making it use a dynamic GPIO base created problems with some old OMAP1 board files, among them Nokia 770, SX1 and also the OMAP2 Nokia n8x0. Fix up all instances of GPIOs being used for the MMC driver by pushing the handling of power, slot selection and MMC "cover" into the driver as optional GPIOs. This is maybe not the most perfect solution as the MMC framework have some central handlers for some of the stuff, but it at least makes the situtation better and solves the immediate issue. Fixes: 92bf78b33b0b ("gpio: omap: use dynamic allocation of base") Acked-by: Ulf Hansson Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

Input: ads7846 - Convert to use software nodes

2023-07-19T14:35:47+00:00

[ Upstream commit 767d83361aaa6a1ecb4d5b89eeb38a267239917a ] The Nokia 770 is using GPIOs from the global numberspace on the CBUS node to pass down to the LCD controller. This regresses when we let the OMAP GPIO driver use dynamic GPIO base. The Nokia 770 now has dynamic allocation of IRQ numbers, so this needs to be fixed for it to work. As this is the only user of LCD MIPID we can easily augment the driver to use a GPIO descriptor instead and resolve the issue. The platform data .shutdown() callback wasn't even used in the code, but we encode a shutdown asserting RESET in the remove() callback for completeness sake. The CBUS also has the ADS7846 touchscreen attached. Populate the devices on the Nokia 770 CBUS I2C using software nodes instead of platform data quirks. This includes the LCD and the ADS7846 touchscreen so the conversion just brings the LCD along with it as software nodes is an all-or-nothing design pattern. The ADS7846 has some limited support for using GPIO descriptors, let's convert it over completely to using device properties and then fix all remaining boardfile users to provide all platform data using software nodes. Dump the of includes and of_match_ptr() in the ADS7846 driver as part of the job. Since we have to move ADS7846 over to obtaining the GPIOs it is using exclusively from descriptors, we provide descriptor tables for the two remaining in-kernel boardfiles using ADS7846: - PXA Spitz - MIPS Alchemy DB1000 development board It was too hard for me to include software node conversion of these two remaining users at this time: the spitz is using a hscync callback in the platform data that would require further GPIO descriptor conversion of the Spitz, and moving the hsync callback down into the driver: it will just become too big of a job, but it can be done separately. The MIPS Alchemy DB1000 is simply something I cannot test, so take the easier approach of just providing some GPIO descriptors in this case as I don't want the patch to grow too intrusive. As we see that several device trees have incorrect polarity flags and just expect to bypass the gpiolib polarity handling, fix up all device trees too, in a separate patch. Suggested-by: Dmitry Torokhov Fixes: 92bf78b33b0b ("gpio: omap: use dynamic allocation of base") Acked-by: Dmitry Torokhov Reviewed-by: Dmitry Torokhov Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

Merge tag 'usb-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2023-04-27T18:42:11+00:00

Pull USB / Thunderbolt updates from Greg KH: "Here is the large set of USB and Thunderbolt changes for 6.4-rc1. The "biggest" thing in here is the removal of two obsolete drivers, u132-hcd and ftdi-elan, making this a net-removal of code overall. Other than the driver removals, included in here are: - Thunderbolt updates for new hardware and features - xhci driver updates and fixes - dwc3 driver updates and fixes - gadget core and driver updates and features added - mtu3 driver updates - dwc2 driver fixes and updates - usb-serial driver updates - typec driver updates and fixes - platform remove callback changes - dts updates and conversions - other small changes All have been in linux-next for a while with no reported problems" * tag 'usb-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (177 commits) usb: dwc3: gadget: Refactor EP0 forced stall/restart into a separate API usb: dwc3: gadget: Execute gadget stop after halting the controller media: radio-shark: Add endpoint checks USB: sisusbvga: Add endpoint checks USB: core: Add routines for endpoint checks in old drivers usb: dwc3: gadget: Stall and restart EP0 if host is unresponsive dt-bindings: usb: snps,dwc3: Add 'snps,parkmode-disable-hs-quirk' quirk usb: dwc3: core: add support for disabling High-speed park mode dt-bindings: usb: ci-hdrc-usb2: allow multiple PHYs usb: mtu3: add optional clock xhci_ck and frmcnt_ck dt-bindings: usb: mtu3: add two optional clocks usb: mtu3: expose role-switch control to userspace usb: mtu3: unlock @mtu->lock just before giving back request usb: mtu3: fix kernel panic at qmu transfer done irq handler usb: mtu3: use boolean return value usb: mtu3: give back request when rx error happens usb: chipidea: fix missing goto in `ci_hdrc_probe` usb: gadget: udc: core: Prevent redundant calls to pullup usb: gadget: udc: core: Invoke usb_gadget_connect only when started usb: typec: ucsi: don't print PPM init deferred errors ...

Merge tag 'spi-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

2023-04-27T18:02:26+00:00

Pull spi updates from Mark Brown: "A fairly standard release for SPI with the exception of a change to the API for specifying chip selects done in preparation for supporting devices with more than one chip select, this required some mechanical changes throughout the tree which have been cooking in -next happily for a while. There's also a new API to allow us to support TPM chips on half duplex controllers. Summary: - Refactoring in preparation for supporting multiple chip selects for a single device, needed by some flash devices, which required a change in the SPI device API visible throughout the tree - Support for hardware assisted interaction with SPI TPMs on half duplex controllers, implemented on nVidia Tedra210 QuadSPI - Optimisation for large transfers on fsl-cpm devices - Cleanups around device property use which fix some sisues with fwnode - Use of both void remove() and devm_platform_.*ioremap_resource() - Support for AMD Pensando Elba, Amlogic A1, Cadence device mode, Intel MetorLake-S and StarFive J7110 QuadSPI" * tag 'spi-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (185 commits) spi: bcm63xx: use macro DEFINE_SIMPLE_DEV_PM_OPS spi: tegra210-quad: Enable TPM wait polling spi: Add TPM HW flow flag spi: bcm63xx: remove PM_SLEEP based conditional compilation spi: cadence-quadspi: use macro DEFINE_SIMPLE_DEV_PM_OPS spi: spi-cadence: Add support for Slave mode spi: spi-cadence: Switch to spi_controller structure spi: cadence-quadspi: fix suspend-resume implementations spi: dw: Add support for AMD Pensando Elba SoC spi: dw: Add AMD Pensando Elba SoC SPI Controller spi: cadence-quadspi: Disable the SPI before reconfiguring spi: cadence-quadspi: Update the read timeout based on the length spi: spi-loopback-test: Add module param for iteration length spi: add support for Amlogic A1 SPI Flash Controller dt-bindings: spi: add Amlogic A1 SPI controller spi: fsl-spi: No need to check transfer length versus word size spi: fsl-spi: Change mspi_apply_cpu_mode_quirks() to void spi: fsl-cpm: Use 16 bit mode for large transfers with even size spi: fsl-spi: Re-organise transfer bits_per_word adaptation spi: fsl-spi: Fix CPM/QE mode Litte Endian ...

Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2023-04-26T23:07:23+00:00

Pull networking updates from Paolo Abeni: "Core: - Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the default value allows for better BIG TCP performances - Reduce compound page head access for zero-copy data transfers - RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when possible - Threaded NAPI improvements, adding defer skb free support and unneeded softirq avoidance - Address dst_entry reference count scalability issues, via false sharing avoidance and optimize refcount tracking - Add lockless accesses annotation to sk_err[_soft] - Optimize again the skb struct layout - Extends the skb drop reasons to make it usable by multiple subsystems - Better const qualifier awareness for socket casts BPF: - Add skb and XDP typed dynptrs which allow BPF programs for more ergonomic and less brittle iteration through data and variable-sized accesses - Add a new BPF netfilter program type and minimal support to hook BPF programs to netfilter hooks such as prerouting or forward - Add more precise memory usage reporting for all BPF map types - Adds support for using {FOU,GUE} encap with an ipip device operating in collect_md mode and add a set of BPF kfuncs for controlling encap params - Allow BPF programs to detect at load time whether a particular kfunc exists or not, and also add support for this in light skeleton - Bigger batch of BPF verifier improvements to prepare for upcoming BPF open-coded iterators allowing for less restrictive looping capabilities - Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF programs to NULL-check before passing such pointers into kfunc - Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in local storage maps - Enable RCU semantics for task BPF kptrs and allow referenced kptr tasks to be stored in BPF maps - Add support for refcounted local kptrs to the verifier for allowing shared ownership, useful for adding a node to both the BPF list and rbtree - Add BPF verifier support for ST instructions in convert_ctx_access() which will help new -mcpu=v4 clang flag to start emitting them - Add ARM32 USDT support to libbpf - Improve bpftool's visual program dump which produces the control flow graph in a DOT format by adding C source inline annotations Protocols: - IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value indicates the provenance of the IP address - IPv6: optimize route lookup, dropping unneeded R/W lock acquisition - Add the handshake upcall mechanism, allowing the user-space to implement generic TLS handshake on kernel's behalf - Bridge: support per-{Port, VLAN} neighbor suppression, increasing resilience to nodes failures - SCTP: add support for Fair Capacity and Weighted Fair Queueing schedulers - MPTCP: delay first subflow allocation up to its first usage. This will allow for later better LSM interaction - xfrm: Remove inner/outer modes from input/output path. These are not needed anymore - WiFi: - reduced neighbor report (RNR) handling for AP mode - HW timestamping support - support for randomized auth/deauth TA for PASN privacy - per-link debugfs for multi-link - TC offload support for mac80211 drivers - mac80211 mesh fast-xmit and fast-rx support - enable Wi-Fi 7 (EHT) mesh support Netfilter: - Add nf_tables 'brouting' support, to force a packet to be routed instead of being bridged - Update bridge netfilter and ovs conntrack helpers to handle IPv6 Jumbo packets properly, i.e. fetch the packet length from hop-by-hop extension header. This is needed for BIT TCP support - The iptables 32bit compat interface isn't compiled in by default anymore - Move ip(6)tables builtin icmp matches to the udptcp one. This has the advantage that icmp/icmpv6 match doesn't load the iptables/ip6tables modules anymore when iptables-nft is used - Extended netlink error report for netdevice in flowtables and netdev/chains. Allow for incrementally add/delete devices to netdev basechain. Allow to create netdev chain without device Driver API: - Remove redundant Device Control Error Reporting Enable, as PCI core has already error reporting enabled at enumeration time - Move Multicast DB netlink handlers to core, allowing devices other then bridge to use them - Allow the page_pool to directly recycle the pages from safely localized NAPI - Implement lockless TX queue stop/wake combo macros, allowing for further code de-duplication and sanitization - Add YNL support for user headers and struct attrs - Add partial YNL specification for devlink - Add partial YNL specification for ethtool - Add tc-mqprio and tc-taprio support for preemptible traffic classes - Add tx push buf len param to ethtool, specifies the maximum number of bytes of a transmitted packet a driver can push directly to the underlying device - Add basic LED support for switch/phy - Add NAPI documentation, stop relaying on external links - Convert dsa_master_ioctl() to netdev notifier. This is a preparatory work to make the hardware timestamping layer selectable by user space - Add transceiver support and improve the error messages for CAN-FD controllers New hardware / drivers: - Ethernet: - AMD/Pensando core device support - MediaTek MT7981 SoC - MediaTek MT7988 SoC - Broadcom BCM53134 embedded switch - Texas Instruments CPSW9G ethernet switch - Qualcomm EMAC3 DWMAC ethernet - StarFive JH7110 SoC - NXP CBTX ethernet PHY - WiFi: - Apple M1 Pro/Max devices - RealTek rtl8710bu/rtl8188gu - RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset - Bluetooth: - Realtek RTL8821CS, RTL8851B, RTL8852BS - Mediatek MT7663, MT7922 - NXP w8997 - Actions Semi ATS2851 - QTI WCN6855 - Marvell 88W8997 - Can: - STMicroelectronics bxcan stm32f429 Drivers: - Ethernet NICs: - Intel (1G, icg): - add tracking and reporting of QBV config errors - add support for configuring max SDU for each Tx queue - Intel (100G, ice): - refactor mailbox overflow detection to support Scalable IOV - GNSS interface optimization - Intel (i40e): - support XDP multi-buffer - nVidia/Mellanox: - add the support for linux bridge multicast offload - enable TC offload for egress and engress MACVLAN over bond - add support for VxLAN GBP encap/decap flows offload - extend packet offload to fully support libreswan - support tunnel mode in mlx5 IPsec packet offload - extend XDP multi-buffer support - support MACsec VLAN offload - add support for dynamic msix vectors allocation - drop RX page_cache and fully use page_pool - implement thermal zone to report NIC temperature - Netronome/Corigine: - add support for multi-zone conntrack offload - Solarflare/Xilinx: - support offloading TC VLAN push/pop actions to the MAE - support TC decap rules - support unicast PTP - Other NICs: - Broadcom (bnxt): enforce software based freq adjustments only on shared PHC NIC - RealTek (r8169): refactor to addess ASPM issues during NAPI poll - Micrel (lan8841): add support for PTP_PF_PEROUT - Cadence (macb): enable PTP unicast - Engleder (tsnep): add XDP socket zero-copy support - virtio-net: implement exact header length guest feature - veth: add page_pool support for page recycling - vxlan: add MDB data path support - gve: add XDP support for GQI-QPL format - geneve: accept every ethertype - macvlan: allow some packets to bypass broadcast queue - mana: add support for jumbo frame - Ethernet high-speed switches: - Microchip (sparx5): Add support for TC flower templates - Ethernet embedded switches: - Broadcom (b54): - configure 6318 and 63268 RGMII ports - Marvell (mv88e6xxx): - faster C45 bus scan - Microchip: - lan966x: - add support for IS1 VCAP - better TX/RX from/to CPU performances - ksz9477: add ETS Qdisc support - ksz8: enhance static MAC table operations and error handling - sama7g5: add PTP capability - NXP (ocelot): - add support for external ports - add support for preemptible traffic classes - Texas Instruments: - add CPSWxG SGMII support for J7200 and J721E - Intel WiFi (iwlwifi): - preparation for Wi-Fi 7 EHT and multi-link support - EHT (Wi-Fi 7) sniffer support - hardware timestamping support for some devices/firwmares - TX beacon protection on newer hardware - Qualcomm 802.11ax WiFi (ath11k): - MU-MIMO parameters support - ack signal support for management packets - RealTek WiFi (rtw88): - SDIO bus support - better support for some SDIO devices (e.g. MAC address from efuse) - RealTek WiFi (rtw89): - HW scan support for 8852b - better support for 6 GHz scanning - support for various newer firmware APIs - framework firmware backwards compatibility - MediaTek WiFi (mt76): - P2P support - mesh A-MSDU support - EHT (Wi-Fi 7) support - coredump support" * tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits) net: phy: hide the PHYLIB_LEDS knob net: phy: marvell-88x2222: remove unnecessary (void*) conversions tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp. net: amd: Fix link leak when verifying config failed net: phy: marvell: Fix inconsistent indenting in led_blink_set lan966x: Don't use xdp_frame when action is XDP_TX tsnep: Add XDP socket zero-copy TX support tsnep: Add XDP socket zero-copy RX support tsnep: Move skb receive action to separate function tsnep: Add functions for queue enable/disable tsnep: Rework TX/RX queue initialization tsnep: Replace modulo operation with mask net: phy: dp83867: Add led_brightness_set support net: phy: Fix reading LED reg property drivers: nfc: nfcsim: remove return value check of `dev_dir` net: phy: dp83867: Remove unnecessary (void*) conversions net: ethtool: coalesce: try to make user settings stick twice net: mana: Check if netdev/napi_alloc_frag returns single page net: mana: Rename mana_refill_rxoob and remove some empty lines net: veth: add page_pool stats ...

platform/chrome: Replace fake flexible arrays with flexible-array member

2023-04-24T05:35:11+00:00

Zero-length arrays as fake flexible arrays are deprecated and we are moving towards adopting C99 flexible-array members instead. Use the DECLARE_FLEX_ARRAY() helper macro to transform zero-length arrays in unions with flexible-array members. Address the following warning found with GCC-13 and -fstrict-flex-arrays=3 enabled: drivers/iio/accel/cros_ec_accel_legacy.c:66:46: warning: array subscript is outside array bounds of ‘struct ec_response_motion_sensor_data[0]’ [-Warray-bounds=] This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. Link: https://github.com/KSPP/linux/issues/21 Link: https://github.com/KSPP/linux/issues/193 Link: https://github.com/KSPP/linux/issues/262 Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1] Signed-off-by: Gustavo A. R. Silva Signed-off-by: Tzung-Bi Shih Link: https://lore.kernel.org/r/ZAZUGBmSLc5wg7AK@work

spi: s3c64xx: add no_cs description

2023-03-30T13:53:38+00:00

This patch adds missing variable no_cs descriptions. Signed-off-by: Jaewon Kim Reviewed-by: Krzysztof Kozlowski Reviewed-by: Andi Shyti Link: https://lore.kernel.org/r/20230306014239.80570-1-jaewon02.kim@samsung.com Signed-off-by: Mark Brown

nfc: mrvl: Move platform_data struct into driver

2023-03-16T17:43:14+00:00

There are no users of nfcmrvl platform_data struct outside of the driver and none will be added, so move it into the driver. Signed-off-by: Rob Herring Reviewed-by: Simon Horman Signed-off-by: David S. Miller

usb: misc: usb3503: support usb3803 and bypass mode

2023-03-16T11:18:03+00:00

Add support for USB3803 and bypass mode, with this change is also possible to move the component out of bypass mode. In bypass mode the downstream port 3 is connected to the upstream port with low switch resistance R_on. Controlling mode of operations: | RESET_N | BYPASS_N | Mode | -------------------------------- | 0 | 0 | standby | | 1 | 0 | bypass | | 1 | 1 | hub | Datasheet: https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/DataSheets/00001691D.pdf Signed-off-by: Emanuele Ghidoli Signed-off-by: Francesco Dolcini Link: https://lore.kernel.org/r/20230313165039.255579-4-francesco@dolcini.it Signed-off-by: Greg Kroah-Hartman

Merge tag 'input-for-v6.3-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2023-02-25T23:01:32+00:00

Pull input updates from Dmitry Torokhov: - a set of tweaks to iqs269a touch controller driver - a fix for ads7846 driver to properly handle 7845 chip - cap11xx driver will support cap1203, cap1293 and cap1298 models - xpad driver will support 8BitDo Pro 2 Wired Controller - input drivers have been switched to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() - other miscellaneous fixes and tweaks * tag 'input-for-v6.3-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (113 commits) dt-bindings: input: iqs626a: Redefine trackpad property types Input: iqs626a - drop unused device node references dt-bindings: input: touchscreen: st,stmfts: convert to dtschema Input: cyttsp5 - fix bitmask for touch buttons Input: exc3000 - properly stop timer on shutdown Input: synaptics-rmi4 - fix SPI device ID Input: cap11xx - add support for cap1203, cap1293 and cap1298 dt-bindings: input: microchip,cap11xx: add cap1203, cap1293 and cap1298 Input: pmic8xxx-keypad - fix a Kconfig spelling mistake & hyphenation Input: edt-ft5x06 - fix typo in a comment Input: tegra-kbc - use devm_platform_get_and_ioremap_resource() Input: st-keyscan - use devm_platform_get_and_ioremap_resource() Input: spear-keyboard - use devm_platform_get_and_ioremap_resource() Input: olpc_apsp - use devm_platform_get_and_ioremap_resource() Input: arc_ps2 - use devm_platform_get_and_ioremap_resource() Input: apbps2 - use devm_platform_get_and_ioremap_resource() Input: altera_ps2 - use devm_platform_get_and_ioremap_resource() Input: ads7846 - don't check penirq immediately for 7845 Input: ads7846 - always set last command to PWRDOWN Input: ads7846 - don't report pressure for ads7845 ...