Linux kernel stable tree (mirror) https://git.radix-linux.su/kernel/linux.git/atom?h=v6.19.11 2025-12-09T21:38:17+00:00 2025-12-09T21:38:17+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-12-09T21:38:17+00:00 urn:sha1:9d588a1140b9ae211581a7a154d0b806d8cd8238 Pull x86 platform driver updates from Ilpo Järvinen: - acer-wmi: Add PH16-72, PHN16-72, and PT14-51 fan control support - acpi: platform_profile: Add max-power profile option (power draw limited by the cooling hardware, may exceed battery power draw limit when on AC power) - amd/hsmp: Allow more than one data-fabric per socket - asus-armoury: Add WMI attributes driver to expose miscellaneous WMI functions through fw_attributes (deprecates the custom BIOS features interface through asus-wmi) - asus-wmi: Use brightness_set_blocking() for kbd led - ayaneo-ec: Add Ayaneo Embedded Controller driver - fs/nls: - Fix utf16 to utf8 string conversion when output size restricted - Improve error code consistency for utf8 to utf32 conversions - ideapad-laptop: Fast (Rapid Charge) charge type support - intel/hid: Add Dell Pro Rugged 10/12 tablet to VGBS DMI quirks - intel/pmc: - Arrow Lake telemetry GUID improvements - Add support for Wildcat Lake PMC information - intel_pmc_ipc: Fix ACPI buffer memleak - intel/punit_ipc: Fix memory corruption - intel/vsec: Wildcat Lake PMT telemetry support - lenovo-wmi-gamezone: Map "Extreme" performance mode to max-power - lg-laptop: Add support for the HDAP opregion field - serial-multi-instantiate: Add IRQ_RESOURCE_OPT for IRQ missing projects - thinkpad-t14s-ec: Improve suspend/resume support (lid LEDs, keyboard backlight) - uniwill: Add Uniwill laptop driver - wmi: Move under drivers/platform/wmi as non-x86 WMI support is around the corner and other WMI features will require adding more C files as well - tools/power/x86/intel-speed-select: v1.24 - Check feature status to check if the feature enablement was successful - Reset SST-TF bucket structure to display valid bucket info - Miscellaneous cleanups / refactoring / improvements * tag 'platform-drivers-x86-v6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (73 commits) tools/power/x86/intel-speed-select: v1.24 release tools/power/x86/intel-speed-select: Reset isst_turbo_freq_info for invalid buckets tools/power/x86/intel-speed-select: Check feature status platform/x86: asus-wmi: use brightness_set_blocking() for kbd led fs/nls: Fix inconsistency between utf8_to_utf32() and utf32_to_utf8() platform/x86: asus-armoury: add support for GA503QR platform/x86: intel_pmc_ipc: fix ACPI buffer memory leak platform/x86: hp-wmi: Order DMI board name arrays platform/x86/intel/hid: Add Dell Pro Rugged 10/12 tablet to VGBS DMI quirks platform: surface: replace use of system_wq with system_percpu_wq platform: x86: replace use of system_wq with system_percpu_wq platform/surface: acpi-notify: add WQ_PERCPU to alloc_workqueue users platform/x86: wmi-gamezone: Add Legion Go 2 Quirks platform/x86: lenovo-wmi-gamezone Use max-power rather than balanced-performance acpi: platform_profile - Add max-power profile option platform/x86/amd/pmf: Use devm_mutex_init() for mutex initialization platform/x86/amd/pmf: Add BIOS_INPUTS_MAX macro to replace hardcoded array size platform/x86: serial-multi-instantiate: Add IRQ_RESOURCE_OPT for IRQ missing projects platform/x86/amd/pmf: Refactor repetitive BIOS output handling platform/x86/uniwill: Add TUXEDO devices ... 2025-12-07T02:42:12+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-12-07T02:42:12+00:00 urn:sha1:f5e9d31e79c1ce8ba948ecac74d75e9c8d2f0c87 Pull USB/Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt driver updates for 6.19-rc1. Nothing major here, just lots of tiny updates for most of the common USB drivers. Included in here are: - more xhci driver updates and fixes - Thunderbolt driver cleanups - usb serial driver updates - typec driver updates - USB tracepoint additions - dwc3 driver updates, including support for Apple hardware - lots of other smaller driver updates and cleanups All of these have been in linux-next for a while with no reported issues" * tag 'usb-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (161 commits) usb: gadget: tegra-xudc: Always reinitialize data toggle when clear halt USB: serial: option: move Telit 0x10c7 composition in the right place USB: serial: option: add Telit Cinterion FE910C04 new compositions usb: typec: ucsi: fix use-after-free caused by uec->work usb: typec: ucsi: fix probe failure in gaokun_ucsi_probe() usb: dwc3: core: Remove redundant comment in core init usb: phy: Initialize struct usb_phy list_head USB: serial: option: add Foxconn T99W760 usb: usb-storage: No additional quirks need to be added to the EL-R12 optical drive. usb: typec: hd3ss3220: Enable VBUS based on ID pin state dt-bindings: usb: ti,hd3ss3220: Add support for VBUS based on ID state usb: typec: anx7411: add WQ_PERCPU to alloc_workqueue users USB: add WQ_PERCPU to alloc_workqueue users dt-bindings: usb: dwc3-xilinx: Describe the reset constraint for the versal platform drivers/usb/storage: use min() instead of min_t() usb: raw-gadget: cap raw_io transfer length to KMALLOC_MAX_SIZE usb: ohci-da8xx: remove unused platform data usb: gadget: functionfs: use dma_buf_unmap_attachment_unlocked() helper usb: uas: reduce time under spinlock usb: dwc3: eic7700: Add EIC7700 USB driver ... 2025-12-04T23:29:27+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-12-04T23:29:27+00:00 urn:sha1:d1b46f53a51e328202ae049f44b86336d124aeac Pull backlight updates from Lee Jones: "Additions: - Add support for Awinic AW99706 backlight driver Fixes: - Add GPIOLIB dependency to backlight ktd2801 driver - Add devlink to LED Backlight's supplier LEDs to enforce correct removal order and prevent NULL pointer dereferences - Fix kernel-doc warnings in lp855x.h Removals: - Do not include <linux/fb.h> in backlight.h - Fix unused function warnings from suspend/resume ops in aw99706.c by switching to DEFINE_SIMPLE_DEV_PM_OPS and using pm_ptr() Bindings: - Add Awinic AW99706 backlight binding to MAINTAINERS - Add Awinic AW99706 backlight binding documentation" * tag 'backlight-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: aw99706: Fix unused function warnings from suspend/resume ops backlight: lp855x: Fix lp855x.h kernel-doc warnings dt-bindings: leds: backlight: Add Awinic AW99706 backlight backlight: aw99706: Add support for Awinic AW99706 backlight backlight: led-bl: Add devlink to supplier LEDs backlight: ktd2801: Depend on GPIOLIB backlight: Do not include <linux/fb.h> in header file 2025-12-04T19:24:24+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-12-04T19:24:24+00:00 urn:sha1:fa5ef105618ae9b5aaa51b3f09e41d88d4514207 Pull spi updates from Mark Brown: "This release is almost entirely new drivers, with a couple of small changes in generic code. The biggest individual update is a rename of the existing Microchip driver and the addition of a new driver for the silicon SPI controller in their PolarFire SoCs. The overlap between the soft IP supported by the current driver and this new one is regrettably all in the IP and not in the register interface offered to software. - Add a time offset parameter for offloads, allowing them to be defined in relation to each other. This is useful for IIO type applcations where you trigger an operation then read the result after a delay. - Add a tracepoint for flash exec_ops, bringing the flash support more in line with the debuggability of vanilla SPI. - Support for Airoha EN7523, Arduino MCUs, Aspeed AST2700, Microchip PolarFire SPI controllers, NXP i.MX51 ECSPI target mode, Qualcomm IPQ5414 and IPQ5332, Renesas RZ/T2H, RZ/V2N and RZ/2NH and SpacemiT K1 QuadSPI. There's also a small set of ASoC cleanups that I mistakenly applied to the SPI tree and then put more stuff on top of before it was brought to my attention, sorry about that" * tag 'spi-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (80 commits) spi: microchip-core: Refactor FIFO read and write handlers spi: ch341: fix out-of-bounds memory access in ch341_transfer_one spi: microchip-core: Remove unneeded PM related macro spi: microchip-core: Use SPI_MODE_X_MASK spi: microchip-core: Utilise temporary variable for struct device spi: microchip-core: Replace dead code (-ENOMEM error message) spi: microchip-core: use min() instead of min_t() spi: dt-bindings: airoha: add compatible for EN7523 spi: airoha-snfi: en7523: workaround flash damaging if UART_TXD was short to GND spi: dt-bindings: renesas,rzv2h-rspi: Document RZ/V2N SoC support spi: dt-bindings: renesas,rzv2h-rspi: Document RZ/V2N SoC support spi: microchip: Enable compile-testing for FPGA SPI controllers spi: Fix potential uninitialized variable in probe() spi: rzv2h-rspi: add support for RZ/T2H and RZ/N2H spi: dt-bindings: renesas,rzv2h-rspi: document RZ/T2H and RZ/N2H spi: rzv2h-rspi: add support for loopback mode spi: rzv2h-rspi: add support for variable transfer clock spi: rzv2h-rspi: add support for using PCLK for transfer clock spi: rzv2h-rspi: make transfer clock rate finding chip-specific spi: rzv2h-rspi: avoid recomputing transfer frequency ... 2025-12-01T09:56:28+00:00 Yongxin Liu yongxin.liu@windriver.com 2025-11-28T10:24:38+00:00 urn:sha1:611cf41ef6ac8301d23daadd8e78b013db0c5071 The intel_pmc_ipc() function uses ACPI_ALLOCATE_BUFFER to allocate memory for the ACPI evaluation result but never frees it, causing a 192-byte memory leak on each call. This leak is triggered during network interface initialization when the stmmac driver calls intel_mac_finish() -> intel_pmc_ipc(). unreferenced object 0xffff96a848d6ea80 (size 192): comm "dhcpcd", pid 541, jiffies 4294684345 hex dump (first 32 bytes): 04 00 00 00 05 00 00 00 98 ea d6 48 a8 96 ff ff ...........H.... 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................ backtrace (crc b1564374): kmemleak_alloc+0x2d/0x40 __kmalloc_noprof+0x2fa/0x730 acpi_ut_initialize_buffer+0x83/0xc0 acpi_evaluate_object+0x29a/0x2f0 intel_pmc_ipc+0xfd/0x170 intel_mac_finish+0x168/0x230 stmmac_mac_finish+0x3d/0x50 phylink_major_config+0x22b/0x5b0 phylink_mac_initial_config.constprop.0+0xf1/0x1b0 phylink_start+0x8e/0x210 __stmmac_open+0x12c/0x2b0 stmmac_open+0x23c/0x380 __dev_open+0x11d/0x2c0 __dev_change_flags+0x1d2/0x250 netif_change_flags+0x2b/0x70 dev_change_flags+0x40/0xb0 Add __free(kfree) for ACPI object to properly release the allocated buffer. Cc: stable@vger.kernel.org Fixes: 7e2f7e25f6ff ("arch: x86: add IPC mailbox accessor function and add SoC register access") Signed-off-by: Yongxin Liu <yongxin.liu@windriver.com> Link: https://patch.msgid.link/20251128102437.3412891-2-yongxin.liu@windriver.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> 2025-12-01T09:53:59+00:00 Ilpo Järvinen ilpo.jarvinen@linux.intel.com 2025-12-01T09:53:59+00:00 urn:sha1:594f9cce51bf80ef2908d13485720277435e88a9 The current set of DMI board IDs from the fixes branch is required to reorder them in the for-next branch. 2025-11-25T12:54:32+00:00 Randy Dunlap rdunlap@infradead.org 2025-11-11T06:09:16+00:00 urn:sha1:2d45db63260c6ae3cf007361e04a1c41bd265084 Add a missing struct short description and a missing leading " *" to lp855x.h to avoid kernel-doc warnings: Warning: include/linux/platform_data/lp855x.h:126 missing initial short description on line: * struct lp855x_platform_data Warning: include/linux/platform_data/lp855x.h:131 bad line: Only valid when mode is PWM_BASED. Fixes: 7be865ab8634 ("backlight: new backlight driver for LP855x devices") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org> Link: https://patch.msgid.link/20251111060916.1995920-1-rdunlap@infradead.org Signed-off-by: Lee Jones <lee@kernel.org> 2025-11-21T14:13:56+00:00 Bartosz Golaszewski bartosz.golaszewski@linaro.org 2025-11-14T18:37:55+00:00 urn:sha1:a75a5b148b4e1d7c0525359be455d5a54024b714 We no longer support any board files for DaVinci in mainline and so struct da8xx_ohci_root_hub is no longer used. Remove it together with all the code it's used for. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://patch.msgid.link/20251114-davinci-usb-v1-1-737380353a74@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2025-11-18T08:52:22+00:00 Luke D. Jones luke@ljones.dev 2025-11-02T21:53:19+00:00 urn:sha1:39ae6c50e599aa0cf62ea3d0dcf06492f7690ed7 Adds the ppt_* and nv_* tuning knobs that are available via WMI methods and adds proper min/max levels plus defaults. The min/max are defined by ASUS and typically gained by looking at what they allow in the ASUS Armoury Crate application - ASUS does not share the values outside of this. It could also be possible to gain the AMD values by use of ryzenadj and testing for the minimum stable value. The general rule of thumb for adding to the match table is that if the model range has a single CPU used throughout, then the DMI match can omit the last letter of the model number as this is the GPU model. If a min or max value is not provided it is assumed that the particular setting is not supported. for example ppt_pl2_sppt_min/max is not set. If a <ppt_setting>_def is not set then the default is assumed to be <ppt_setting>_max It is assumed that at least AC settings are available so that the firmware attributes will be created - if no DC table is available and power is on DC, then reading the attributes is -ENODEV. Co-developed-by: Denis Benato <denis.benato@linux.dev> Signed-off-by: Denis Benato <denis.benato@linux.dev> Signed-off-by: Luke D. Jones <luke@ljones.dev> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Tested-by: Mateusz Schyboll <dragonn@op.pl> Tested-by: Porfet Lillian <porfet828@gmail.com> Link: https://patch.msgid.link/20251102215319.3126879-10-denis.benato@linux.dev Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> 2025-11-18T08:52:21+00:00 Denis Benato denis.benato@linux.dev 2025-11-02T21:53:18+00:00 urn:sha1:d849a9f2380d5287d5133eac5bae602a147b86c2 Maintain power-related WMI macros naming consistency: rename ASUS_WMI_DEVID_PPT_FPPT to ASUS_WMI_DEVID_PPT_PL3_FPPT. Link: https://lore.kernel.org/all/cad7b458-5a7a-4975-94a1-d0c74f6f3de5@oracle.com/ Suggested-by: ALOK TIWARI <alok.a.tiwari@oracle.com> Signed-off-by: Denis Benato <denis.benato@linux.dev> Link: https://.../ Link: https://patch.msgid.link/20251102215319.3126879-9-denis.benato@linux.dev Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>