kernel/linux.git/include/linux/pinctrl, branch v5.2.1

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 194

2019-05-30T18:29:22+00:00

Based on 1 normalized pattern(s): license terms gnu general public license gpl version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 161 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Alexios Zavras Reviewed-by: Steve Winslow Reviewed-by: Richard Fontana Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528170027.447718015@linutronix.de Signed-off-by: Greg Kroah-Hartman

pinctrl: remove unused 'pinconf-config' debugfs interface

2019-01-28T13:39:52+00:00

The main goal of the change is to remove .pin_config_dbg_parse_modify callback before a driver with its support appears. So far the in-kernel interface did not attract any users since its introduction 5 years ago. Originally .pin_config_dbg_parse_modify callback and the associated 'pinconf-config' debugfs file were introduced in commit f07512e615dd ("pinctrl/pinconfig: add debug interface"), a short description of 'pinconf-config' usage for debugging can be expressed this way: Write to 'pinconf-config' (see pinconf_dbg_config_write() function): % echo -n modify $map_type $device_name $state_name $pin_name $config > \ /sys/kernel/debug/pinctrl/$pinctrl/pinconf-config It supposes to update a global (therefore single!) 'pinconf_dbg_conf' variable with an alternative setting, the arguments should match an existing pinconf device and some registered pinctrl mapping 'map': * $map_type is either 'config_pin' or 'config_group', it should match 'map->type' value of PIN_MAP_TYPE_CONFIGS_PIN or PIN_MAP_TYPE_CONFIGS_GROUP accordingly, * $device_name should match 'map->dev_name' string value, * $state_name should match 'map->name' string value, * $pin_name should match 'map->data.configs.group_or_pin' string value, If all above has matched, then $config is a new value to be set by calling pinconfops->pin_config_dbg_parse_modify(pctldev, config, matched_config). After a successful write into 'pinconf-config' a user can read the file to get information about that single modified pin configuration. The fact is .pin_config_dbg_parse_modify callback has never been defined in 'struct pinconf_ops' of any pinconf driver, thus an actual modification of a pin or group state on any present pinconf controller does not happen, and it declares that all related code is no more than dead code. I discovered the issue while attempting to add .pin_config_dbg_parse_modify support in some drivers and found that too short 'MAX_NAME_LEN' set by drivers/pinctrl/pinconf.c:372:#define MAX_NAME_LEN 15 is practically insufficient to store a regular pinctrl device name, which are like 'e6060000.pin-controller-sh-pfc' or pin names like 'MX6QDL_PAD_ENET_REF_CLK', thus it is another indicator that the code is barely usable, insufficiently tested and unprepossessing. Of course it might be possible to increase MAX_NAME_LEN, and then add .pin_config_dbg_parse_modify callbacks to the drivers, but the whole idea of such a limited debug option looks inviable. A more flexible way to functionally substitute the original approach is to implicitly or explicitly use pinctrl_select_state() function whenever needed. Signed-off-by: Vladimir Zapolskiy Cc: Laurent Meunier Cc: Masahiro Yamada Cc: Russell King Signed-off-by: Linus Walleij

pinctrl: remove pinctrl/machine.h inclusion from pinctrl/pinconf.h

2019-01-28T13:39:17+00:00

The change adds explicit inclusion of linux/pinctrl/machine.h header to the only needed pinctrl-madera-core.c file, and therefore inclusion of pinctrl/machine.h header from pinctrl/pinconf.h can be removed. The change is preparatory to a follow-up reversal of commit f07512e615dd ("pinctrl/pinconfig: add debug interface"). Signed-off-by: Vladimir Zapolskiy Cc: Charles Keepax Reviewed-by Richard Fitzgerald Signed-off-by: Linus Walleij

pinctrl: Document pin_config_group_get() return codes like pin_config_get()

2018-07-09T11:09:21+00:00

The pinconf_generic_dump_one() function makes the assumption that pin_config_group_get() should return -EINVAL and -ENOTSUPP just like pin_config_get() does. Document that so it's more obvious. Signed-off-by: Douglas Anderson Signed-off-by: Linus Walleij

pinctrl: remove include file from

2018-02-03T20:10:09+00:00

When pulling the recent pinctrl merge, I was surprised by how a pinctrl-only pull request ended up rebuilding basically the whole kernel. The reason for that ended up being that included , so any change to that file ended up causing pretty much every driver out there to be rebuilt. The reason for that was because 'struct device' has this in it: #ifdef CONFIG_PINCTRL struct dev_pin_info *pins; #endif but we already avoid header includes for these kinds of things in that header file, preferring to just use a forward-declaration of the structure instead. Exactly to avoid this kind of header dependency. Since some drivers seem to expect that header to come in automatically, move the include to instead. It might be better to just make the includes more targeted, but I'm not going to review every driver. It would definitely be good to have a tool for finding and minimizing header dependencies automatically - or at least help with them. Right now we almost certainly end up having way too many of these things, and it's hard to test every single configuration. FWIW, you can get a sense of the "hotness" of a header file with something like this after doing a full build: find . -name '.*.o.cmd' -print0 | xargs -0 tail --lines=+2 | grep -v 'wildcard ' | tr ' \\' '\n' | sort | uniq -c | sort -n | less -S which isn't exact (there are other things in those '*.o.cmd' than just the dependencies, and the "--lines=+2" only removes the header), but might a useful approximation. With this patch, drops to "only" having 833 users in the current x86-64 allmodconfig. In contrast, has 14857 build files including it directly or indirectly. Of course, the headers that absolutely _everybody_ includes (things like etc) get a score of 23000+. Cc: Linus Walleij Cc: Greg Kroah-Hartman Signed-off-by: Linus Torvalds

Merge tag 'pinctrl-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2018-02-02T22:22:53+00:00

Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.16 kernel cycle. Like with GPIO it is actually a bit calm this time. Core changes: - After lengthy discussions and partly due to my ignorance, we have merged a patch making pinctrl_force_default() and pinctrl_force_sleep() reprogram the states into the hardware of any hogged pins, even if they are already in the desired state. This only apply to hogged pins since groups of pins owned by drivers need to be managed by each driver, lest they could not do things like runtime PM and put pins to sleeping state even if the system as a whole is not in sleep. New drivers: - New driver for the Microsemi Ocelot SoC. This is used in ethernet switches. - The X-Powers AXP209 GPIO driver was extended to also deal with pin control and moved over from the GPIO subsystem. This circuit is a mixed-mode integrated circuit which is part of AllWinner designs. - New subdriver for the Qualcomm MSM8998 SoC, core of a high end mobile devices (phones) chipset. - New subdriver for the ST Microelectronics STM32MP157 MPU and STM32F769 MCU from the STM32 family. - New subdriver for the MediaTek MT7622 SoC. This is used for routers, repeater, gateways and such network infrastructure. - New subdriver for the NXP (former Freescale) i.MX 6ULL. This SoC has multimedia features and target "smart devices", I guess in-car entertainment, in-flight entertainment, industrial control panels etc. General improvements: - Incremental improvements on the SH-PFC subdrivers for things like the CAN bus. - Enable the glitch filter on Baytrail GPIOs used for interrupts. - Proper handling of pins to GPIO ranges on the Semtec SX150X - An IRQ setup ordering fix on MCP23S08. - A good set of janitorial coding style fixes" * tag 'pinctrl-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (102 commits) pinctrl: mcp23s08: fix irq setup order pinctrl: Forward declare struct device pinctrl: sunxi: Use of_clk_get_parent_count() instead of open coding pinctrl: stm32: add STM32F769 MCU support pinctrl: sx150x: Add a static gpio/pinctrl pin range mapping pinctrl: sx150x: Register pinctrl before adding the gpiochip pinctrl: sx150x: Unregister the pinctrl on release pinctrl: ingenic: Remove redundant dev_err call in ingenic_pinctrl_probe() pinctrl: sprd: Use seq_putc() in sprd_pinconf_group_dbg_show() pinctrl: pinmux: Use seq_putc() in pinmux_pins_show() pinctrl: abx500: Use seq_putc() in abx500_gpio_dbg_show() pinctrl: mediatek: mt7622: align error handling of mtk_hw_get_value call pinctrl: mediatek: mt7622: fix potential uninitialized value being returned pinctrl: uniphier: refactor drive strength get/set functions pinctrl: imx7ulp: constify struct imx_cfg_params_decode pinctrl: imx: constify struct imx_pinctrl_soc_info pinctrl: imx7d: simplify imx7d_pinctrl_probe pinctrl: imx: use struct imx_pinctrl_soc_info as a const pinctrl: sunxi-pinctrl: fix pin funtion can not be match correctly. pinctrl: qcom: Add msm8998 pinctrl driver ...

pinctrl: Forward declare struct device

2018-01-22T12:31:19+00:00

pinctrl/devinfo.h is using forward declaration from pinctrl/consumer.h for configurations with CONFIG_PINCTRL defined, however nothing declares it in the opposite case. Fix this by adding a forward declaration. Signed-off-by: Ladislav Michl Signed-off-by: Linus Walleij

gpio: gpiolib: Generalise state persistence beyond sleep

2017-12-02T21:42:34+00:00

General support for state persistence is added to gpiolib with the introduction of a new pinconf parameter to propagate the request to hardware. The existing persistence support for sleep is adapted to include hardware support if the GPIO driver provides it. Persistence continues to be enabled by default; in-kernel consumers can opt out, but userspace (currently) does not have a choice. The *_SLEEP_MAY_LOSE_VALUE and *_SLEEP_MAINTAIN_VALUE symbols are renamed, dropping the SLEEP prefix to reflect that the concept is no longer sleep-specific. I feel that renaming to just *_MAY_LOSE_VALUE could initially be misinterpreted, so I've further changed the symbols to *_TRANSITORY and *_PERSISTENT to address this. The sysfs interface is modified only to keep consistency with the chardev interface in enforcing persistence for userspace exports. Signed-off-by: Andrew Jeffery Reviewed-by: Charles Keepax Acked-by: Rob Herring Signed-off-by: Linus Walleij

Merge tag 'pinctrl-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2017-11-16T18:57:11+00:00

Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.15 kernel cycle: Core: - The pin control Kconfig entry PINCTRL is now turned into a menuconfig option. This obviously has the implication of making the subsystem menu visible in menuconfig. This is happening because of two things: (a) Intel have started to deploy and depend on pin controllers in a way that is affecting users directly. This happens on the highly integrated laptop chipsets named after geographical places: baytrail, broxton, cannonlake, cedarfork, cherryview, denverton, geminilake, lewisburg, merrifield, sunrisepoint... It started a while back and now it is ever more evident that this is crucial infrastructure for x86 laptops and not an embedded obscurity anymore. Users need to be aware. (b) Pin control expanders on I2C and SPI that are arch-agnostic. Currently Semtech SX150X and Microchip MCP28x08 but more are expected. Users will have to be able to configure these in directly for their set-up. - Just go and select GPIOLIB now that we made sure that GPIOLIB is a very vanilla subsystem. Do not depend on it, if we need it, select it. - Exposing the pin control subsystem in menuconfig uncovered a bunch of obscure bugs that are now hopefully fixed, all more or less pertaining to Blackfin. - Unified namespace for cross-calls between pin control and GPIO. - New support for clock skew/delay generic DT bindings and generic pin config options for this. - Minor documentation improvements. Various: - The Renesas SH-PFC pin controller has evolved a lot. It seems Renesas are churning out new SoCs by the minute. - A bunch of non-critical fixes for the Rockchip driver. - Improve the use of library functions instead of open coding. - Support the MCP28018 variant in the MCP28x08 driver. - Static constifying" * tag 'pinctrl-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (91 commits) pinctrl: gemini: Fix missing pad descriptions pinctrl: Add some depends on HAS_IOMEM pinctrl: samsung/s3c24xx: add CONFIG_OF dependency pinctrl: gemini: Fix GMAC groups pinctrl: qcom: spmi-gpio: Add pmi8994 gpio support pinctrl: ti-iodelay: remove redundant unused variable dev pinctrl: max77620: Use common error handling code in max77620_pinconf_set() pinctrl: gemini: Implement clock skew/delay config pinctrl: gemini: Use generic DT parser pinctrl: Add skew-delay pin config and bindings pinctrl: armada-37xx: Add edge both type gpio irq support pinctrl: uniphier: remove eMMC hardware reset pin-mux pinctrl: rockchip: Add iomux-route switching support for rk3288 pinctrl: intel: Add Intel Cedar Fork PCH pin controller support pinctrl: intel: Make offset to interrupt status register configurable pinctrl: sunxi: Enforce the strict mode by default pinctrl: sunxi: Disable strict mode for old pinctrl drivers pinctrl: sunxi: Introduce the strict flag pinctrl: sh-pfc: Save/restore registers for PSCI system suspend pinctrl: sh-pfc: r8a7796: Use generic IOCTRL register description ...

pinctrl: Add skew-delay pin config and bindings

2017-11-08T12:49:45+00:00

Some pin controllers (such as the Gemini) can control the expected clock skew and output delay on certain pins with a sub-nanosecond granularity. This is typically done by shunting in a number of double inverters in front of or behind the pin. Make it possible to configure this with a generic binding. Cc: devicetree@vger.kernel.org Acked-by: Rob Herring Acked-by: Hans Ulli Kroll Signed-off-by: Linus Walleij