kernel/linux.git/include/linux/phy/phy-mipi-dphy.h, branch v6.19.11

phy: dphy: add support to calculate the timing based on hs_clk_rate

2022-10-27T11:38:04+00:00

For MIPI-CSI sender use-case it is common to specify the allowed link-frequencies which should be used for the MIPI link and is half the hs-clock rate. This commit adds a helper to calculate the D-PHY timing based on the hs-clock rate so we don't need to calculate the timings within the driver. Signed-off-by: Marco Felsch Acked-by: Vinod Koul Signed-off-by: Sakari Ailus

phy: dphy: Clarify lanes parameter documentation

2019-02-07T05:41:05+00:00

The lanes parameter is not solely about the number of lanes, but it also carries the fact that those are the first lanes in use during the transmission. It was implicit so far, so make sure it's explicit now. Suggested-by: Sakari Ailus Acked-by: Sakari Ailus Signed-off-by: Maxime Ripard Signed-off-by: Kishon Vijay Abraham I

phy: dphy: Change units of wakeup and init parameters

2019-02-07T05:41:05+00:00

The Init and wakeup D-PHY parameters are in the micro/milliseconds range, putting the values real close to the types limits if they were in picoseconds. Move them to microseconds which should be better fit. Suggested-by: Sakari Ailus Acked-by: Sakari Ailus Signed-off-by: Maxime Ripard Signed-off-by: Kishon Vijay Abraham I

phy: dphy: Remove unused header

2019-02-07T05:41:04+00:00

The videomode.h header inclusion is an artifact from the patches development, remove it. Suggested-by: Sakari Ailus Acked-by: Sakari Ailus Signed-off-by: Maxime Ripard Signed-off-by: Kishon Vijay Abraham I

phy: dphy: Add configuration helpers

2018-12-12T04:31:51+00:00

The MIPI D-PHY spec defines default values and boundaries for most of the parameters it defines. Introduce helpers to help drivers get meaningful values based on their current parameters, and validate the boundaries of these parameters if needed. Signed-off-by: Maxime Ripard Signed-off-by: Kishon Vijay Abraham I

phy: Add MIPI D-PHY configuration options

2018-12-12T04:31:50+00:00

Now that we have some infrastructure for it, allow the MIPI D-PHY phy's to be configured through the generic functions through a custom structure added to the generic union. The parameters added here are the ones defined in the MIPI D-PHY spec, plus the number of lanes in use. The current set of parameters should cover all the potential users. Signed-off-by: Maxime Ripard Signed-off-by: Kishon Vijay Abraham I