kernel/linux.git/include/linux/phy.h, branch v6.3.8

net: phy: constify fwnode_get_phy_node() fwnode argument

2023-03-27T07:12:01+00:00

fwnode_get_phy_node() does not motify the fwnode structure, so make the argument const, Signed-off-by: Russell King (Oracle) Reviewed-by: Simon Horman Signed-off-by: David S. Miller

net: phy: do not force EEE support

2023-02-23T12:43:23+00:00

With following patches: commit 9b01c885be36 ("net: phy: c22: migrate to genphy_c45_write_eee_adv()") commit 5827b168125d ("net: phy: c45: migrate to genphy_c45_write_eee_adv()") we set the advertisement to potentially supported values. This behavior may introduce new regressions on systems where EEE was disabled by default (BIOS or boot loader configuration or by other ways.) At same time, with this patches, we would overwrite EEE advertisement configuration made over ethtool. To avoid this issues, we need to cache initial and ethtool advertisement configuration and store it for later use. Fixes: 9b01c885be36 ("net: phy: c22: migrate to genphy_c45_write_eee_adv()") Fixes: 5827b168125d ("net: phy: c45: migrate to genphy_c45_write_eee_adv()") Fixes: 022c3f87f88e ("net: phy: add genphy_c45_ethtool_get/set_eee() support") Signed-off-by: Oleksij Rempel Reviewed-by: Russell King (Oracle) Signed-off-by: Paolo Abeni

net: phy: c45: add genphy_c45_an_config_eee_aneg() function

2023-02-23T12:43:23+00:00

Add new genphy_c45_an_config_eee_aneg() function and replace some of genphy_c45_write_eee_adv() calls. This will be needed by the next patch. Signed-off-by: Oleksij Rempel Reviewed-by: Russell King (Oracle) Signed-off-by: Paolo Abeni

net: phy: add genphy_c45_ethtool_get/set_eee() support

2023-02-13T11:12:31+00:00

Add replacement for phy_ethtool_get/set_eee() functions. Current phy_ethtool_get/set_eee() implementation is great and it is possible to make it even better: - this functionality is for devices implementing parts of IEEE 802.3 specification beyond Clause 22. The better place for this code is phy-c45.c - currently it is able to do read/write operations on PHYs with different abilities to not existing registers. It is better to use stored supported_eee abilities to avoid false read/write operations. - the eee_active detection will provide wrong results on not supported link modes. It is better to validate speed/duplex properties against supported EEE link modes. - it is able to support only limited amount of link modes. We have more EEE link modes... By refactoring this code I address most of this point except of the last one. Adding additional EEE link modes will need more work. Signed-off-by: Oleksij Rempel Signed-off-by: David S. Miller

net: phy: export phy_check_valid() function

2023-02-13T11:12:31+00:00

This function will be needed for genphy_c45_ethtool_get_eee() provided by next patch. Signed-off-by: Oleksij Rempel Reviewed-by: Alexander Duyck Signed-off-by: David S. Miller

net: phy: add genphy_c45_read_eee_abilities() function

2023-02-13T11:12:31+00:00

Add generic function for EEE abilities defined by IEEE 802.3 specification. For now following registers are supported: - IEEE 802.3-2018 45.2.3.10 EEE control and capability 1 (Register 3.20) - IEEE 802.3cg-2019 45.2.1.186b 10BASE-T1L PMA status register (Register 1.2295) Since I was not able to find any flag signaling support of these registers, we should detect link mode abilities first and then based on these abilities doing EEE link modes detection. Results of EEE ability detection will be stored into new variable phydev->supported_eee. Signed-off-by: Oleksij Rempel Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: phy: Remove probe_capabilities

2023-01-19T15:23:19+00:00

Deciding if to probe of PHYs using C45 is now determine by if the bus provides the C45 read method. This makes probe_capabilities redundant so remove it. Signed-off-by: Andrew Lunn Signed-off-by: Michael Walle Reviewed-by: Jesse Brandeburg Acked-by: Andrew Jeffery Signed-off-by: Paolo Abeni

net: mdio: Rework scanning of bus ready for quirks

2023-01-19T15:23:19+00:00

Some C22 PHYs do bad things when there are C45 transactions on the bus. In order to handle this, the bus needs to be scanned first for C22 at all addresses, and then C45 scanned for all addresses. The Marvell pxa168 driver scans a specific address on the bus to find its PHY. This is a C22 only device, so update it to use the c22 helper. Signed-off-by: Andrew Lunn Signed-off-by: Michael Walle Reviewed-by: Jesse Brandeburg Signed-off-by: Paolo Abeni

drivers/net/phy: add helpers to get/set PLCA configuration

2023-01-11T08:35:02+00:00

This patch adds support in phylib to read/write PLCA configuration for Ethernet PHYs that support the OPEN Alliance "10BASE-T1S PLCA Management Registers" specifications. These can be found at https://www.opensig.org/about/specifications/ Signed-off-by: Piergiorgio Beruto Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

drivers/net/phy: add connection between ethtool and phylib for PLCA

2023-01-11T08:35:02+00:00

This patch adds the required connection between netlink ethtool and phylib to resolve PLCA get/set config and get status messages. Signed-off-by: Piergiorgio Beruto Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller