kernel/linux.git/include/linux/perf/arm_pmu.h, branch v6.1.168

arm64/perf: Assert all platform event flags are within PERF_EVENT_FLAG_ARCH

2022-09-07T19:54:01+00:00

Ensure all platform specific event flags are within PERF_EVENT_FLAG_ARCH. Signed-off-by: Anshuman Khandual Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: James Clark Link: https://lkml.kernel.org/r/20220907091924.439193-4-anshuman.khandual@arm.com

drivers/perf: arm_pmu: Handle 47 bit counters

2022-03-08T13:32:48+00:00

The current ARM PMU framework can only deal with 32 or 64bit counters. Teach it about a 47bit flavour. Yes, this is odd. Reviewed-by: Hector Martin Signed-off-by: Marc Zyngier Signed-off-by: Will Deacon

KVM: arm64: Fix PMU probe ordering

2021-09-20T11:43:34+00:00

Russell reported that since 5.13, KVM's probing of the PMU has started to fail on his HW. As it turns out, there is an implicit ordering dependency between the architectural PMU probing code and and KVM's own probing. If, due to probe ordering reasons, KVM probes before the PMU driver, it will fail to detect the PMU and prevent it from being advertised to guests as well as the VMM. Obviously, this is one probing too many, and we should be able to deal with any ordering. Add a callback from the PMU code into KVM to advertise the registration of a host CPU PMU, allowing for any probing order. Fixes: 5421db1be3b1 ("KVM: arm64: Divorce the perf code from oprofile helpers") Reported-by: "Russell King (Oracle)" Tested-by: Russell King (Oracle) Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/YUYRKVflRtUytzy5@shell.armlinux.org.uk Cc: stable@vger.kernel.org

Revert "arm64: Enable perf events based hard lockup detector"

2021-01-13T15:08:41+00:00

This reverts commit 367c820ef08082e68df8a3bc12e62393af21e4b5. lockup_detector_init() makes heavy use of per-cpu variables and must be called with preemption disabled. Usually, it's handled early during boot in kernel_init_freeable(), before SMP has been initialised. Since we do not know whether or not our PMU interrupt can be signalled as an NMI until considerably later in the boot process, the Arm PMU driver attempts to re-initialise the lockup detector off the back of a device_initcall(). Unfortunately, this is called from preemptible context and results in the following splat: | BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1 | caller is debug_smp_processor_id+0x20/0x2c | CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.10.0+ #276 | Hardware name: linux,dummy-virt (DT) | Call trace: | dump_backtrace+0x0/0x3c0 | show_stack+0x20/0x6c | dump_stack+0x2f0/0x42c | check_preemption_disabled+0x1cc/0x1dc | debug_smp_processor_id+0x20/0x2c | hardlockup_detector_event_create+0x34/0x18c | hardlockup_detector_perf_init+0x2c/0x134 | watchdog_nmi_probe+0x18/0x24 | lockup_detector_init+0x44/0xa8 | armv8_pmu_driver_init+0x54/0x78 | do_one_initcall+0x184/0x43c | kernel_init_freeable+0x368/0x380 | kernel_init+0x1c/0x1cc | ret_from_fork+0x10/0x30 Rather than bodge this with raw_smp_processor_id() or randomly disabling preemption, simply revert the culprit for now until we figure out how to do this properly. Reported-by: Lecopzer Chen Signed-off-by: Will Deacon Acked-by: Mark Rutland Cc: Sumit Garg Cc: Alexandru Elisei Link: https://lore.kernel.org/r/20201221162249.3119-1-lecopzer.chen@mediatek.com Link: https://lore.kernel.org/r/20210112221855.10666-1-will@kernel.org Signed-off-by: Catalin Marinas

arm64: Enable perf events based hard lockup detector

2020-11-25T15:18:39+00:00

With the recent feature added to enable perf events to use pseudo NMIs as interrupts on platforms which support GICv3 or later, its now been possible to enable hard lockup detector (or NMI watchdog) on arm64 platforms. So enable corresponding support. One thing to note here is that normally lockup detector is initialized just after the early initcalls but PMU on arm64 comes up much later as device_initcall(). So we need to re-initialize lockup detection once PMU has been initialized. Signed-off-by: Sumit Garg Acked-by: Alexandru Elisei Link: https://lore.kernel.org/r/1602060704-10921-1-git-send-email-sumit.garg@linaro.org Signed-off-by: Will Deacon

arm64: perf: Add support caps under sysfs

2020-09-28T13:53:45+00:00

ARMv8.4-PMU introduces the PMMIR_EL1 registers and some new PMU events, like STALL_SLOT etc, are related to it. Let's add a caps directory to /sys/bus/event_source/devices/armv8_pmuv3_0/ and support slots from PMMIR_EL1 registers in this entry. The user programs can get the slots from sysfs directly. /sys/bus/event_source/devices/armv8_pmuv3_0/caps/slots is exposed under sysfs. Both ARMv8.4-PMU and STALL_SLOT event are implemented, it returns the slots from PMMIR_EL1, otherwise it will return 0. Signed-off-by: Shaokun Zhang Cc: Will Deacon Cc: Mark Rutland Link: https://lore.kernel.org/r/1600754025-53535-1-git-send-email-zhangshaokun@hisilicon.com Signed-off-by: Will Deacon

arm64: perf: Add support for ARMv8.5-PMU 64-bit counters

2020-03-17T22:50:30+00:00

At present ARMv8 event counters are limited to 32-bits, though by using the CHAIN event it's possible to combine adjacent counters to achieve 64-bits. The perf config1:0 bit can be set to use such a configuration. With the introduction of ARMv8.5-PMU support, all event counters can now be used as 64-bit counters. Let's enable 64-bit event counters where support exists. Unless the user sets config1:0 we will adjust the counter value such that it overflows upon 32-bit overflow. This follows the same behaviour as the cycle counter which has always been (and remains) 64-bits. Signed-off-by: Andrew Murray Reviewed-by: Suzuki K Poulose [Mark: fix ID field names, compare with 8.5 value] Signed-off-by: Mark Rutland Signed-off-by: Will Deacon

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

2019-07-08T16:54:55+00:00

Pull arm64 updates from Catalin Marinas: - arm64 support for syscall emulation via PTRACE_SYSEMU{,_SINGLESTEP} - Wire up VM_FLUSH_RESET_PERMS for arm64, allowing the core code to manage the permissions of executable vmalloc regions more strictly - Slight performance improvement by keeping softirqs enabled while touching the FPSIMD/SVE state (kernel_neon_begin/end) - Expose a couple of ARMv8.5 features to user (HWCAP): CondM (new XAFLAG and AXFLAG instructions for floating point comparison flags manipulation) and FRINT (rounding floating point numbers to integers) - Re-instate ARM64_PSEUDO_NMI support which was previously marked as BROKEN due to some bugs (now fixed) - Improve parking of stopped CPUs and implement an arm64-specific panic_smp_self_stop() to avoid warning on not being able to stop secondary CPUs during panic - perf: enable the ARM Statistical Profiling Extensions (SPE) on ACPI platforms - perf: DDR performance monitor support for iMX8QXP - cache_line_size() can now be set from DT or ACPI/PPTT if provided to cope with a system cache info not exposed via the CPUID registers - Avoid warning on hardware cache line size greater than ARCH_DMA_MINALIGN if the system is fully coherent - arm64 do_page_fault() and hugetlb cleanups - Refactor set_pte_at() to avoid redundant READ_ONCE(*ptep) - Ignore ACPI 5.1 FADTs reported as 5.0 (infer from the 'arm_boot_flags' introduced in 5.1) - CONFIG_RANDOMIZE_BASE now enabled in defconfig - Allow the selection of ARM64_MODULE_PLTS, currently only done via RANDOMIZE_BASE (and an erratum workaround), allowing modules to spill over into the vmalloc area - Make ZONE_DMA32 configurable * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits) perf: arm_spe: Enable ACPI/Platform automatic module loading arm_pmu: acpi: spe: Add initial MADT/SPE probing ACPI/PPTT: Add function to return ACPI 6.3 Identical tokens ACPI/PPTT: Modify node flag detection to find last IDENTICAL x86/entry: Simplify _TIF_SYSCALL_EMU handling arm64: rename dump_instr as dump_kernel_instr arm64/mm: Drop [PTE|PMD]_TYPE_FAULT arm64: Implement panic_smp_self_stop() arm64: Improve parking of stopped CPUs arm64: Expose FRINT capabilities to userspace arm64: Expose ARMv8.5 CondM capability to userspace arm64: defconfig: enable CONFIG_RANDOMIZE_BASE arm64: ARM64_MODULES_PLTS must depend on MODULES arm64: bpf: do not allocate executable memory arm64/kprobes: set VM_FLUSH_RESET_PERMS on kprobe instruction pages arm64/mm: wire up CONFIG_ARCH_HAS_SET_DIRECT_MAP arm64: module: create module allocations without exec permissions arm64: Allow user selection of ARM64_MODULE_PLTS acpi/arm64: ignore 5.1 FADTs that are reported as 5.0 arm64: Allow selecting Pseudo-NMI again ...

arm_pmu: acpi: spe: Add initial MADT/SPE probing

2019-06-27T15:53:42+00:00

ACPI 6.3 adds additional fields to the MADT GICC structure to describe SPE PPI's. We pick these out of the cached reference to the madt_gicc structure similarly to the core PMU code. We then create a platform device referring to the IRQ and let the user/module loader decide whether to load the SPE driver. Tested-by: Hanjun Guo Reviewed-by: Sudeep Holla Reviewed-by: Lorenzo Pieralisi Signed-off-by: Jeremy Linton Signed-off-by: Will Deacon

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55+00:00

Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Enrico Weigelt Reviewed-by: Kate Stewart Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman