kernel/linux.git/include/linux/pcs/pcs-xpcs.h, branch linux-rockchip-6.5.y

net: pcs: xpcs: update PCS driver to use neg_mode

2023-06-23T02:41:01+00:00

Update xpcs to use neg_mode to configure whether inband negotiation should be used. We need to update sja1105 as well as that directly calls into the XPCS driver's config function. Signed-off-by: Russell King (Oracle) Link: https://lore.kernel.org/r/E1qA8Dt-00EaFS-W9@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski

net: pcs: Add 10GBASE-R mode for Synopsys Designware XPCS

2023-06-08T11:25:10+00:00

Add basic support for XPCS using 10GBASE-R interface. This mode will be extended to use interrupt, so set pcs.poll false. And avoid soft reset so that the device using this mode is in the default configuration. Signed-off-by: Jiawen Wu Reviewed-by: Andrew Lunn Reviewed-by: Maciej Fijalkowski Signed-off-by: Paolo Abeni

net: pcs: xpcs: remove xpcs_create() from public view

2023-06-05T10:26:02+00:00

There are now no callers of xpcs_create(), so let's remove it from public view to discourage future direct usage. Signed-off-by: Russell King (Oracle) Reviewed-by: Vladimir Oltean Signed-off-by: David S. Miller

net: pcs: xpcs: add xpcs_create_mdiodev()

2023-05-30T04:46:53+00:00

Add xpcs_create_mdiodev() to simplify the creation of the mdio device associated with the XPCS. In order to allow xpcs_destroy() to clean this up, we need to arrange for xpcs_create() to take a refcount on the mdiodev, and xpcs_destroy() to put it. Adding the refcounting to xpcs_create()..xpcs_destroy() will be transparent to existing users of these interfaces. Signed-off-by: Russell King (Oracle) Reviewed-by: Andrew Lunn Signed-off-by: Jakub Kicinski

net: pcs: xpcs: add CL37 1000BASE-X AN support

2022-06-17T09:55:35+00:00

For CL37 1000BASE-X AN, DW xPCS does not support C22 method but offers C45 vendor-specific MII MMD for programming. We also add the ability to disable Autoneg (through ethtool for certain network switch that supports 1000BASE-X (1000Mbps and Full-Duplex) but not Autoneg capability. v4: Fixes to comment from Russell King. Thanks! https://patchwork.kernel.org/comment/24894239/ Make xpcs_modify_changed() as private, change to use mdiodev_modify_changed() for cleaner code. v3: Fixes to issues spotted by Russell King. Thanks! https://patchwork.kernel.org/comment/24890210/ Use phylink_mii_c22_pcs_decode_state(), remove unnecessary interrupt clearing and skip speed & duplex setting if AN is enabled. v2: Fixes to issues spotted by Russell King in v1. Thanks! https://patchwork.kernel.org/comment/24826650/ Use phylink_mii_c22_pcs_encode_advertisement() and implement C45 MII ADV handling since IP only support C45 access. Tested-by: Emilio Riva Signed-off-by: Ong Boon Leong Reviewed-by: Russell King (Oracle) Signed-off-by: David S. Miller

net: make xpcs_do_config to accept advertising for pcs-xpcs and sja1105

2022-06-17T09:55:35+00:00

xpcs_config() has 'advertising' input that is required for C37 1000BASE-X AN in later patch series. So, we prepare xpcs_do_config() for it. For sja1105, xpcs_do_config() is used for xpcs configuration without depending on advertising input, so set to NULL. Reported-by: kernel test robot Signed-off-by: Ong Boon Leong Signed-off-by: David S. Miller

net: stmmac/xpcs: convert to pcs_validate()

2022-01-26T11:20:37+00:00

stmmac explicitly calls the xpcs driver to validate the ethtool linkmodes. This is no longer necessary as phylink now supports validation through a PCS method. Convert both drivers to use this new mechanism. Tested-by: Wong Vee Khee # Intel EHL Signed-off-by: Russell King (Oracle) Signed-off-by: David S. Miller

net: xpcs: add support for retrieving supported interface modes

2022-01-26T11:20:37+00:00

Add a function to the xpcs driver to retrieve the supported PHY interface modes, which can be used by drivers to fill in phylink's supported_interfaces mask. We validate the interface bit index to ensure that it fits within the bitmap as xpcs lists PHY_INTERFACE_MODE_MAX in an entry. Tested-by: Wong Vee Khee # Intel EHL Signed-off-by: Russell King (Oracle) Signed-off-by: David S. Miller

net: pcs: xpcs: export xpcs_do_config and xpcs_link_up

2021-06-11T20:43:56+00:00

The sja1105 hardware has a quirk in that some changes require a switch reset, which loses all configuration. When the reset is initiated, everything needs to be reprogrammed, including the MACs and the PCS. This is currently done in sja1105_static_config_reload() - we manually call sja1105_adjust_port_config(), sja1105_sgmii_pcs_config() and sja1105_sgmii_pcs_force_speed() which are all internal functions. There is a desire for sja1105 to use the common xpcs driver, and that means that the equivalents of those functions, xpcs_do_config() and xpcs_link_up() respectively, will no longer be local functions. Forcing phylink to retrigger a resolve somehow, say by doing dev_close() followed by dev_open() is not really an option, because the CPU port might have a PCS as well, and there is no net device which we can close and reopen for that. Additionally, the dev_close/dev_open sequence might force a renegotiation of the copper-side link for SGMII ports connected to a PHY, and this is undesirable as well, because the switch reset is much quicker than a PHY autoneg, so we would have a lot more downtime. The only solution I see is for the sja1105 driver to keep doing what it's doing, and that means we need to export the equivalents from xpcs for sja1105_sgmii_pcs_config and sja1105_sgmii_pcs_force_speed, and call them directly in sja1105_static_config_reload(). This will be done during the conversion patch. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: pcs: xpcs: add support for NXP SJA1110

2021-06-11T20:43:56+00:00

The NXP SJA1110 switch integrates its own, non-Synopsys PMA, but it manages it through the register space of the XPCS itself, in a small register window inside MDIO_MMD_VEND2 from address 0x8030 to 0x806e. This coincides with where the registers for the default Synopsys PMA are, but the register definitions are of course not the same. This situation is an odd hardware quirk, but the simplest way to manage it is to drive the SJA1110's PMA from within the XPCS driver. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller