kernel/linux.git/include/linux/pci_ids.h, branch v7.0-rc7

Merge tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2026-02-12T03:31:52+00:00

Pull networking updates from Paolo Abeni: "Core & protocols: - A significant effort all around the stack to guide the compiler to make the right choice when inlining code, to avoid unneeded calls for small helper and stack canary overhead in the fast-path. This generates better and faster code with very small or no text size increases, as in many cases the call generated more code than the actual inlined helper. - Extend AccECN implementation so that is now functionally complete, also allow the user-space enabling it on a per network namespace basis. - Add support for memory providers with large (above 4K) rx buffer. Paired with hw-gro, larger rx buffer sizes reduce the number of buffers traversing the stack, dincreasing single stream CPU usage by up to ~30%. - Do not add HBH header to Big TCP GSO packets. This simplifies the RX path, the TX path and the NIC drivers, and is possible because user-space taps can now interpret correctly such packets without the HBH hint. - Allow IPv6 routes to be configured with a gateway address that is resolved out of a different interface than the one specified, aligning IPv6 to IPv4 behavior. - Multi-queue aware sch_cake. This makes it possible to scale the rate shaper of sch_cake across multiple CPUs, while still enforcing a single global rate on the interface. - Add support for the nbcon (new buffer console) infrastructure to netconsole, enabling lock-free, priority-based console operations that are safer in crash scenarios. - Improve the TCP ipv6 output path to cache the flow information, saving cpu cycles, reducing cache line misses and stack use. - Improve netfilter packet tracker to resolve clashes for most protocols, avoiding unneeded drops on rare occasions. - Add IP6IP6 tunneling acceleration to the flowtable infrastructure. - Reduce tcp socket size by one cache line. - Notify neighbour changes atomically, avoiding inconsistencies between the notification sequence and the actual states sequence. - Add vsock namespace support, allowing complete isolation of vsocks across different network namespaces. - Improve xsk generic performances with cache-alignment-oriented optimizations. - Support netconsole automatic target recovery, allowing netconsole to reestablish targets when underlying low-level interface comes back online. Driver API: - Support for switching the working mode (automatic vs manual) of a DPLL device via netlink. - Introduce PHY ports representation to expose multiple front-facing media ports over a single MAC. - Introduce "rx-polarity" and "tx-polarity" device tree properties, to generalize polarity inversion requirements for differential signaling. - Add helper to create, prepare and enable managed clocks. Device drivers: - Add Huawei hinic3 PF etherner driver. - Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet controller. - Add ethernet driver for MaxLinear MxL862xx switches - Remove parallel-port Ethernet driver. - Convert existing driver timestamp configuration reporting to hwtstamp_get and remove legacy ioctl(). - Convert existing drivers to .get_rx_ring_count(), simplifing the RX ring count retrieval. Also remove the legacy fallback path. - Ethernet high-speed NICs: - Broadcom (bnxt, bng): - bnxt: add FW interface update to support FEC stats histogram and NVRAM defragmentation - bng: add TSO and H/W GRO support - nVidia/Mellanox (mlx5): - improve latency of channel restart operations, reducing the used H/W resources - add TSO support for UDP over GRE over VLAN - add flow counters support for hardware steering (HWS) rules - use a static memory area to store headers for H/W GRO, leading to 12% RX tput improvement - Intel (100G, ice, idpf): - ice: reorganizes layout of Tx and Rx rings for cacheline locality and utilizes __cacheline_group* macros on the new layouts - ice: introduces Synchronous Ethernet (SyncE) support - Meta (fbnic): - adds debugfs for firmware mailbox and tx/rx rings vectors - Ethernet virtual: - geneve: introduce GRO/GSO support for double UDP encapsulation - Ethernet NICs consumer, and embedded: - Synopsys (stmmac): - some code refactoring and cleanups - RealTek (r8169): - add support for RTL8127ATF (10G Fiber SFP) - add dash and LTR support - Airoha: - AN8811HB 2.5 Gbps phy support - Freescale (fec): - add XDP zero-copy support - Thunderbolt: - add get link setting support to allow bonding - Renesas: - add support for RZ/G3L GBETH SoC - Ethernet switches: - Maxlinear: - support R(G)MII slow rate configuration - add support for Intel GSW150 - Motorcomm (yt921x): - add DCB/QoS support - TI: - icssm-prueth: support bridging (STP/RSTP) via the switchdev framework - Ethernet PHYs: - Realtek: - enable SGMII and 2500Base-X in-band auto-negotiation - simplify and reunify C22/C45 drivers - Micrel: convert bindings to DT schema - CAN: - move skb headroom content into skb extensions, making CAN metadata access more robust - CAN drivers: - rcar_canfd: - add support for FD-only mode - add support for the RZ/T2H SoC - sja1000: cleanup the CAN state handling - WiFi: - implement EPPKE/802.1X over auth frames support - split up drop reasons better, removing generic RX_DROP - additional FTM capabilities: 6 GHz support, supported number of spatial streams and supported number of LTF repetitions - better mac80211 iterators to enumerate resources - initial UHR (Wi-Fi 8) support for cfg80211/mac80211 - WiFi drivers: - Qualcomm/Atheros: - ath11k: support for Channel Frequency Response measurement - ath12k: a significant driver refactor to support multi-wiphy devices and and pave the way for future device support in the same driver (rather than splitting to ath13k) - ath12k: support for the QCC2072 chipset - Intel: - iwlwifi: partial Neighbor Awareness Networking (NAN) support - iwlwifi: initial support for U-NII-9 and IEEE 802.11bn - RealTek (rtw89): - preparations for RTL8922DE support - Bluetooth: - implement setsockopt(BT_PHY) to set the connection packet type/PHY - set link_policy on incoming ACL connections - Bluetooth drivers: - btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE - btqca: add WCN6855 firmware priority selection feature" * tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1254 commits) bnge/bng_re: Add a new HSI net: macb: Fix tx/rx malfunction after phy link down and up af_unix: Fix memleak of newsk in unix_stream_connect(). net: ti: icssg-prueth: Add optional dependency on HSR net: dsa: add basic initial driver for MxL862xx switches net: mdio: add unlocked mdiodev C45 bus accessors net: dsa: add tag format for MxL862xx switches dt-bindings: net: dsa: add MaxLinear MxL862xx selftests: drivers: net: hw: Modify toeplitz.c to poll for packets octeontx2-pf: Unregister devlink on probe failure net: renesas: rswitch: fix forwarding offload statemachine ionic: Rate limit unknown xcvr type messages tcp: inet6_csk_xmit() optimization tcp: populate inet->cork.fl.u.ip6 in tcp_v6_syn_recv_sock() tcp: populate inet->cork.fl.u.ip6 in tcp_v6_connect() ipv6: inet6_csk_xmit() and inet6_csk_update_pmtu() use inet->cork.fl.u.ip6 ipv6: use inet->cork.fl.u.ip6 and np->final in ip6_datagram_dst_update() ipv6: use np->final in inet6_sk_rebuild_header() ipv6: add daddr/final storage in struct ipv6_pinfo net: stmmac: qcom-ethqos: fix qcom_ethqos_serdes_powerup() ...

Merge tag 'pci-v7.0-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

2026-02-12T01:20:38+00:00

Pull PCI updates from Bjorn Helgaas: "Enumeration: - Don't try to enable Extended Tags on VFs since that bit is Reserved and causes misleading log messages (Håkon Bugge) - Initialize Endpoint Read Completion Boundary to match Root Port, regardless of ACPI _HPX (Håkon Bugge) - Apply _HPX PCIe Setting Record only to AER configuration, and only when OS owns PCIe hotplug but not AER, to avoid clobbering Extended Tag and Relaxed Ordering settings (Håkon Bugge) Resource management: - Move CardBus code to setup-cardbus.c and only build it when CONFIG_CARDBUS is set (Ilpo Järvinen) - Fix bridge window alignment with optional resources, where additional alignment requirement was previously lost (Ilpo Järvinen) - Stop over-estimating bridge window size since they are now assigned without any gaps between them (Ilpo Järvinen) - Increase resource MAX_IORES_LEVEL to avoid /proc/iomem flattening for nested bridges and endpoints (Ilpo Järvinen) - Add pbus_mem_size_optional() to handle sizes of optional resources (SR-IOV VF BARs, expansion ROMs, bridge windows) (Ilpo Järvinen) - Don't claim disabled bridge windows to avoid spurious claim failures (Ilpo Järvinen) Driver binding: - Fix device reference leak in pcie_port_remove_service() (Uwe Kleine-König) - Move pcie_port_bus_match() and pcie_port_bus_type to PCIe-specific portdrv.c (Uwe Kleine-König) - Convert portdrv to use pcie_port_bus_type.probe() and .remove() callbacks so .probe() and .remove() can eventually be removed from struct device_driver (Uwe Kleine-König) Error handling: - Clear stale errors on reporting agents upon probe so they don't look like recent errors (Lukas Wunner) - Add generic RAS tracepoint for hotplug events (Shuai Xue) - Add RAS tracepoint for link speed changes (Shuai Xue) Power management: - Avoid redundant delay on transition from D3hot to D3cold if the device was already in D3hot (Brian Norris) - Prevent runtime suspend until devices are fully initialized to avoid saving incompletely configured device state (Brian Norris) Power control: - Add power_on/off callbacks with generic signature to pwrseq, tc9563, and slot drivers so they can be used by pwrctrl core (Manivannan Sadhasivam) - Add PCIe M.2 connector support to the slot pwrctrl driver (Manivannan Sadhasivam) - Switch to pwrctrl interfaces to create, destroy, and power on/off devices, calling them from host controller drivers instead of the PCI core (Manivannan Sadhasivam) - Drop qcom .assert_perst() callbacks since this is now done by the controller driver instead of the pwrctrl driver (Manivannan Sadhasivam) Virtualization: - Remove an incorrect unlock in pci_slot_trylock() error handling (Jinhui Guo) - Lock the bridge device for slot reset (Keith Busch) - Enable ACS after IOMMU configuration on OF platforms so ACS is enabled an all devices; previously the first device enumerated (typically a Root Port) didn't have ACS enabled (Manivannan Sadhasivam) - Disable ACS Source Validation for IDT 0x80b5 and 0x8090 switches to work around hardware erratum; previously ACS SV was only temporarily disabled, which worked for enumeration but not after reset (Manivannan Sadhasivam) Peer-to-peer DMA: - Release per-CPU pgmap ref when vm_insert_page() fails to avoid hang when removing the PCI device (Hou Tao) - Remove incorrect p2pmem_alloc_mmap() warning about page refcount (Hou Tao) Endpoint framework: - Add configfs sub-groups synchronously to avoid NULL pointer dereference when racing with removal (Liu Song) - Fix swapped parameters in pci_{primary/secondary}_epc_epf_unlink() functions (Manikanta Maddireddy) ASPEED PCIe controller driver: - Add ASPEED Root Complex DT binding and driver (Jacky Chou) Freescale i.MX6 PCIe controller driver: - Add DT binding and driver support for an optional external refclock in addition to the refclock from the internal PLL (Richard Zhu) - Fix CLKREQ# control so host asserts it during enumeration and Endpoints can use it afterwards to exit the L1.2 link state (Richard Zhu) NVIDIA Tegra PCIe controller driver: - Export irq_domain_free_irqs() to allow PCI/MSI drivers that tear down MSI domains to be built as modules (Aaron Kling) - Allow pci-tegra to be built as a module (Aaron Kling) NVIDIA Tegra194 PCIe controller driver: - Relax Kconfig so tegra194 can be built for platforms beyond Tegra194 (Vidya Sagar) Qualcomm PCIe controller driver: - Merge SC8180x DT binding into SM8150 (Krzysztof Kozlowski) - Move SDX55, SDM845, QCS404, IPQ5018, IPQ6018, IPQ8074 Gen3, IPQ8074, IPQ4019, IPQ9574, APQ8064, MSM8996, APQ8084 to dedicated schema (Krzysztof Kozlowski) - Add DT binding and driver support for SA8255p Endpoint being configured by firmware (Mrinmay Sarkar) - Parse PERST# from all PCIe bridge nodes for future platforms that will have PERST# in Switch Downstream Ports as well as in Root Ports (Manivannan Sadhasivam) Renesas RZ/G3S PCIe controller driver: - Use pci_generic_config_write() since the writability provided by the custom wrapper is unnecessary (Claudiu Beznea) SOPHGO PCIe controller driver: - Disable ASPM L0s and L1 on Sophgo 2044 PCIe Root Ports (Inochi Amaoto) Synopsys DesignWare PCIe controller driver: - Extend PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() to return a pointer to the preceding Capability, to allow removal of Capabilities that are advertised but not fully implemented (Qiang Yu) - Remove MSI and MSI-X Capabilities in platforms that can't support them, so the PCI core automatically falls back to INTx (Qiang Yu) - Add ASPM L1.1 and L1.2 Substates context to debugfs ltssm_status for drivers that support this (Shawn Lin) - Skip PME_Turn_Off broadcast and L2/L3 transition during suspend if link is not up to avoid an unnecessary timeout (Manivannan Sadhasivam) - Revert dw-rockchip, qcom, and DWC core changes that used link-up IRQs to trigger enumeration instead of waiting for link to be up because the PCI core doesn't allocate bus number space for hierarchies that might be attached (Niklas Cassel) - Make endpoint iATU entry for MSI permanent instead of programming it dynamically, which is slow and racy with respect to other concurrent traffic, e.g., eDMA (Koichiro Den) - Use iMSI-RX MSI target address when possible to fix endpoints using 32-bit MSI (Shawn Lin) - Allow DWC host controller driver probe to continue if device is not found or found but inactive; only fail when there's an error with the link (Manivannan Sadhasivam) - For controllers like NXP i.MX6QP and i.MX7D, where LTSSM registers are not accessible after PME_Turn_Off, simply wait 10ms instead of polling for L2/L3 Ready (Richard Zhu) - Use multiple iATU entries to map large bridge windows and DMA ranges when necessary instead of failing (Samuel Holland) - Add EPC dynamic_inbound_mapping feature bit for Endpoint Controllers that can update BAR inbound address translation without requiring EPF driver to clear/reset the BAR first, and advertise it for DWC-based Endpoints (Koichiro Den) - Add EPC subrange_mapping feature bit for Endpoint Controllers that can map multiple independent inbound regions in a single BAR, implement subrange mapping, advertise it for DWC-based Endpoints, and add Endpoint selftests for it (Koichiro Den) - Make resizable BARs work for Endpoint multi-PF configurations; previously it only worked for PF 0 (Aksh Garg) - Fix Endpoint non-PF 0 support for BAR configuration, ATU mappings, and Address Match Mode (Aksh Garg) - Set up iATU when ECAM is enabled; previously IO and MEM outbound windows weren't programmed, and ECAM-related iATU entries weren't restored after suspend/resume, so config accesses failed (Krishna Chaitanya Chundru) Miscellaneous: - Use system_percpu_wq and WQ_PERCPU to explicitly request per-CPU work so WQ_UNBOUND can eventually be removed (Marco Crivellari)" * tag 'pci-v7.0-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (176 commits) PCI/bwctrl: Disable BW controller on Intel P45 using a quirk PCI: Disable ACS SV for IDT 0x8090 switch PCI: Disable ACS SV for IDT 0x80b5 switch PCI: Cache ACS Capabilities register PCI: Enable ACS after configuring IOMMU for OF platforms PCI: Add ACS quirk for Pericom PI7C9X2G404 switches [12d8:b404] PCI: Add ACS quirk for Qualcomm Hamoa & Glymur PCI: Use device_lock_assert() to verify device lock is held PCI: Use lockdep_assert_held(pci_bus_sem) to verify lock is held PCI: Fix pci_slot_lock () device locking PCI: Fix pci_slot_trylock() error handling PCI: Mark Nvidia GB10 to avoid bus reset PCI: Mark ASM1164 SATA controller to avoid bus reset PCI: host-generic: Avoid reporting incorrect 'missing reg property' error PCI/PME: Replace RMW of Root Status register with direct write PCI/AER: Clear stale errors on reporting agents upon probe PCI: Don't claim disabled bridge windows PCI: rzg3s-host: Fix device node reference leak in rzg3s_pcie_host_parse_port() PCI: dwc: Fix missing iATU setup when ECAM is enabled PCI: dwc: Clean up iATU index usage in dw_pcie_iatu_setup() ...

net: remove HIPPI support and RoadRunner HIPPI driver

2026-01-21T03:12:06+00:00

HIPPI has not been relevant for over two decades. It was rapidly eclipsed by Fibre Channel, and even when it was new, it was confined to very high-end hardware. The HIPPI code has only received tree-wide changes and fixes by inspection in the entire Git history. Remove HIPPI support and the rrunner HIPPI driver, and move the former maintainer to the CREDITS file. Keep the include/uapi/linux/if_hippi.h header because it is used by the TUN code, and to avoid breaking userspace, however unlikely that may be. Signed-off-by: Ethan Nelson-Moore Link: https://patch.msgid.link/20260119022451.22344-1-enelsonmoore@gmail.com Signed-off-by: Jakub Kicinski

PCI: Add Intel Nova Lake audio Device ID

2026-01-20T20:08:20+00:00

Add Nova Lake (NVL) audio Device ID The ID will be used by HDA legacy, SOF audio stack and the driver to determine which audio stack should be used (intel-dsp-config). Signed-off-by: Peter Ujfalusi Reviewed-by: Kai Vehmanen Reviewed-by: Liam Girdwood Reviewed-by: Ranjani Sridharan Acked-by: Bjorn Helgaas Acked-by: Takashi Iwai Link: https://patch.msgid.link/20260120193507.14019-2-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown

PCI: Add ASPEED vendor ID to pci_ids.h

2026-01-09T20:21:16+00:00

Add PCI_VENDOR_ID_ASPEED to the shared pci_ids.h header and remove the duplicate local definition from ehci-pci.c. This prepares for adding a PCI quirk for ASPEED devices. Signed-off-by: Nirmoy Das Signed-off-by: Bjorn Helgaas Reviewed-by: Jason Gunthorpe Link: https://patch.msgid.link/20251217154529.377586-1-nirmoyd@nvidia.com

ASoC: Fix acronym for Intel Gemini Lake

2025-12-15T14:08:47+00:00

While the used GML is consistent with the pattern for other Intel * Lake SoCs, the de facto use is GLK. Update the acronym and users accordingly. Note, a handful of the drivers for Gemini Lake in the Linux kernel use GLK already (LPC, MEI, pin control, SDHCI, ...) and even some in ASoC. The only ones in this patch used the inconsistent one. Acked-by: Bjorn Helgaas # pci_ids.h Signed-off-by: Andy Shevchenko Reviewed-by: Peter Ujfalusi Reviewed-by: Cezary Rojewski Link: https://patch.msgid.link/20251212181742.3944789-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown

PCI: Add Intel Nova Lake S audio Device ID

2025-11-17T11:04:28+00:00

Add Nova Lake S (NVL-S) audio Device ID The ID will be used by HDA legacy, SOF audio stack and the driver to determine which audio stack should be used (intel-dsp-config). Signed-off-by: Peter Ujfalusi Reviewed-by: Kai Vehmanen Reviewed-by: Ranjani Sridharan Acked-by: Bjorn Helgaas Signed-off-by: Takashi Iwai Link: https://patch.msgid.link/20251104121650.21872-2-peter.ujfalusi@linux.intel.com

misc: rp1: RaspberryPi RP1 misc driver

2025-06-16T18:50:34+00:00

The RaspberryPi RP1 is a PCI multi function device containing peripherals ranging from Ethernet to USB controller, I2C, SPI and others. Implement a bare minimum driver to operate the RP1, leveraging actual OF based driver implementations for the on-board peripherals by loading a devicetree overlay during driver probe if the RP1 node is not already present in the DT. The peripherals are accessed by mapping MMIO registers starting from PCI BAR1 region. With the overlay approach we can achieve more generic and agnostic approach to managing this chipset, being that it is a PCI endpoint and could possibly be reused in other hw implementations. The presented approach is also used by Bootlin's Microchip LAN966x patchset (see link) as well, for a similar chipset. In this case, the inclusion tree for the DT overlay is as follow (the arrow points to the includer): rp1-pci.dtso <---- rp1-common.dtsi On the other hand, to ensure compatibility with downstream, this driver can also work with a DT already comprising the RP1 node, so the dynamically loaded overlay will not be used if the DT is already fully defined. The reason why this driver is contained in drivers/misc has been paved by Bootlin's LAN966X driver, which first used the overlay approach to implement non discoverable peripherals behind a PCI bus. For RP1, the same arguments apply: it's not used as an SoC since the driver code is not running on-chip and is not like an MFD since it does not really need all the MFD infrastructure (shared regs, etc.). So, for this particular use, misc has been proposed and deemed as a good choice. For further details about that please check the links. This driver is heavily based on downstream code from RaspberryPi Foundation, and the original author is Phil Elwell. Link: https://datasheets.raspberrypi.com/rp1/rp1-peripherals.pdf Link: https://lore.kernel.org/all/20240612140208.GC1504919@google.com/ Link: https://lore.kernel.org/all/83f7fa09-d0e6-4f36-a27d-cee08979be2a@app.fastmail.com/ Link: https://lore.kernel.org/all/2024081356-mutable-everyday-6f9d@gregkh/ Link: https://lore.kernel.org/all/20240808154658.247873-1-herve.codina@bootlin.com/ Signed-off-by: Andrea della Porta Acked-by: Bjorn Helgaas # quirks.c, pci_ids.h Acked-by: Greg Kroah-Hartman Link: https://lore.kernel.org/r/20250529135052.28398-7-andrea.porta@suse.com Signed-off-by: Florian Fainelli

Merge tag 'asoc-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

2025-05-22T18:30:34+00:00

ASoC: Updates for v6.16 The changes in this release are quite large, mainly in drivers rather than the core. This is partly due to cleanups that touch a lot of drivers and partly due to several relatively large new drivers. - Support for automatically enumerating DAIs from standards conforming SoundWire SDCA devices, further work is required for these to be useful in an actual card. - Conversion of quite a few drivers to newer GPIO APIs. - More helpers and cleanups from Mormimoto-san. - Support for a wider range of AVS platforms. - Support for AMD ACP 7.x platforms, Cirrus Logic CS35L63 and CS48L32, Everest Semiconductor ES8389, Longsoon-1 AC'97 controllers, nVidia Tegra264, Richtek ALC203 and RT9123 and Rockchip SAI controllers.

PCI: Add Intel Wildcat Lake audio Device ID

2025-05-19T20:40:03+00:00

Add Wildcat Lake (WCL) audio Device ID. Signed-off-by: Peter Ujfalusi Reviewed-by: Kai Vehmanen Reviewed-by: Bard Liao Reviewed-by: Guennadi Liakhovetski Reviewed-by: Ranjani Sridharan Reviewed-by: Pierre-Louis Bossart Acked-by: Krzysztof Wilczyński Signed-off-by: Takashi Iwai Link: https://patch.msgid.link/20250519080855.16977-2-peter.ujfalusi@linux.intel.com