kernel/linux.git/include/linux/pci_ids.h, branch v6.19.11

PCI: Add Intel Nova Lake audio Device ID

2026-03-04T12:20:06+00:00

[ Upstream commit b190870e0e0cfb375c0d4da02761c32083f3644d ] Add Nova Lake (NVL) audio Device ID The ID will be used by HDA legacy, SOF audio stack and the driver to determine which audio stack should be used (intel-dsp-config). Signed-off-by: Peter Ujfalusi Reviewed-by: Kai Vehmanen Reviewed-by: Liam Girdwood Reviewed-by: Ranjani Sridharan Acked-by: Bjorn Helgaas Acked-by: Takashi Iwai Link: https://patch.msgid.link/20260120193507.14019-2-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

PCI: Add Intel Nova Lake S audio Device ID

2025-11-17T11:04:28+00:00

Add Nova Lake S (NVL-S) audio Device ID The ID will be used by HDA legacy, SOF audio stack and the driver to determine which audio stack should be used (intel-dsp-config). Signed-off-by: Peter Ujfalusi Reviewed-by: Kai Vehmanen Reviewed-by: Ranjani Sridharan Acked-by: Bjorn Helgaas Signed-off-by: Takashi Iwai Link: https://patch.msgid.link/20251104121650.21872-2-peter.ujfalusi@linux.intel.com

misc: rp1: RaspberryPi RP1 misc driver

2025-06-16T18:50:34+00:00

The RaspberryPi RP1 is a PCI multi function device containing peripherals ranging from Ethernet to USB controller, I2C, SPI and others. Implement a bare minimum driver to operate the RP1, leveraging actual OF based driver implementations for the on-board peripherals by loading a devicetree overlay during driver probe if the RP1 node is not already present in the DT. The peripherals are accessed by mapping MMIO registers starting from PCI BAR1 region. With the overlay approach we can achieve more generic and agnostic approach to managing this chipset, being that it is a PCI endpoint and could possibly be reused in other hw implementations. The presented approach is also used by Bootlin's Microchip LAN966x patchset (see link) as well, for a similar chipset. In this case, the inclusion tree for the DT overlay is as follow (the arrow points to the includer): rp1-pci.dtso <---- rp1-common.dtsi On the other hand, to ensure compatibility with downstream, this driver can also work with a DT already comprising the RP1 node, so the dynamically loaded overlay will not be used if the DT is already fully defined. The reason why this driver is contained in drivers/misc has been paved by Bootlin's LAN966X driver, which first used the overlay approach to implement non discoverable peripherals behind a PCI bus. For RP1, the same arguments apply: it's not used as an SoC since the driver code is not running on-chip and is not like an MFD since it does not really need all the MFD infrastructure (shared regs, etc.). So, for this particular use, misc has been proposed and deemed as a good choice. For further details about that please check the links. This driver is heavily based on downstream code from RaspberryPi Foundation, and the original author is Phil Elwell. Link: https://datasheets.raspberrypi.com/rp1/rp1-peripherals.pdf Link: https://lore.kernel.org/all/20240612140208.GC1504919@google.com/ Link: https://lore.kernel.org/all/83f7fa09-d0e6-4f36-a27d-cee08979be2a@app.fastmail.com/ Link: https://lore.kernel.org/all/2024081356-mutable-everyday-6f9d@gregkh/ Link: https://lore.kernel.org/all/20240808154658.247873-1-herve.codina@bootlin.com/ Signed-off-by: Andrea della Porta Acked-by: Bjorn Helgaas # quirks.c, pci_ids.h Acked-by: Greg Kroah-Hartman Link: https://lore.kernel.org/r/20250529135052.28398-7-andrea.porta@suse.com Signed-off-by: Florian Fainelli

Merge tag 'asoc-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

2025-05-22T18:30:34+00:00

ASoC: Updates for v6.16 The changes in this release are quite large, mainly in drivers rather than the core. This is partly due to cleanups that touch a lot of drivers and partly due to several relatively large new drivers. - Support for automatically enumerating DAIs from standards conforming SoundWire SDCA devices, further work is required for these to be useful in an actual card. - Conversion of quite a few drivers to newer GPIO APIs. - More helpers and cleanups from Mormimoto-san. - Support for a wider range of AVS platforms. - Support for AMD ACP 7.x platforms, Cirrus Logic CS35L63 and CS48L32, Everest Semiconductor ES8389, Longsoon-1 AC'97 controllers, nVidia Tegra264, Richtek ALC203 and RT9123 and Rockchip SAI controllers.

PCI: Add Intel Wildcat Lake audio Device ID

2025-05-19T20:40:03+00:00

Add Wildcat Lake (WCL) audio Device ID. Signed-off-by: Peter Ujfalusi Reviewed-by: Kai Vehmanen Reviewed-by: Bard Liao Reviewed-by: Guennadi Liakhovetski Reviewed-by: Ranjani Sridharan Reviewed-by: Pierre-Louis Bossart Acked-by: Krzysztof Wilczyński Signed-off-by: Takashi Iwai Link: https://patch.msgid.link/20250519080855.16977-2-peter.ujfalusi@linux.intel.com

ASoC: Intel: avs: PTL-based platforms support

2025-04-07T13:39:59+00:00

Define handlers specific to ACE platforms, that Frisco Lake (FCL), a PantherLake (PTL)-based platform, is founded upon. Most operations are still inherited from their predecessors with the major difference being AudioDSP cores management - replaced by DSP-domain power management. Software has to ensure the DSP domain is both powered on and its power-gating disabled before it can be utilized for streaming. Reviewed-by: Amadeusz Sławiński Signed-off-by: Cezary Rojewski Acked-by: Liam Girdwood Link: https://patch.msgid.link/20250407112352.3720779-6-cezary.rojewski@intel.com Signed-off-by: Mark Brown

Merge tag 'pci-v6.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

2025-03-29T02:36:53+00:00

Pull pci updates from Bjorn Helgaas: "Enumeration: - Enable Configuration RRS SV, which makes device readiness visible, early instead of during child bus scanning (Bjorn Helgaas) - Log debug messages about reset methods being used (Bjorn Helgaas) - Avoid reset when it has been disabled via sysfs (Nishanth Aravamudan) - Add common pci-ep-bus.yaml schema for exporting several peripherals of a single PCI function via devicetree (Andrea della Porta) - Create DT nodes for PCI host bridges to enable loading device tree overlays to create platform devices for PCI devices that have several features that require multiple drivers (Herve Codina) Resource management: - Enlarge devres table[] to accommodate bridge windows, ROM, IOV BARs, etc., and validate BAR index in devres interfaces (Philipp Stanner) - Fix typo that repeatedly distributed resources to a bridge instead of iterating over subordinate bridges, which resulted in too little space to assign some BARs (Kai-Heng Feng) - Relax bridge window tail sizing for optional resources, e.g., IOV BARs, to avoid failures when removing and re-adding devices (Ilpo Järvinen) - Allow drivers to enable devices even if we haven't assigned optional IOV resources to them (Ilpo Järvinen) - Rework handling of optional resources (IOV BARs, ROMs) to reduce failures if we can't allocate them (Ilpo Järvinen) - Fix a NULL dereference in the SR-IOV VF creation error path (Shay Drory) - Fix s390 mmio_read/write syscalls, which didn't cause page faults in some cases, which broke vfio-pci lazy mapping on first access (Niklas Schnelle) - Add pdev->non_mappable_bars to replace CONFIG_VFIO_PCI_MMAP, which was disabled only for s390 (Niklas Schnelle) - Support mmap of PCI resources on s390 except for ISM devices (Niklas Schnelle) ASPM: - Delay pcie_link_state deallocation to avoid dangling pointers that cause invalid references during hot-unplug (Daniel Stodden) Power management: - Allow PCI bridges to go to D3Hot when suspending on all non-x86 systems (Manivannan Sadhasivam) Power control: - Create pwrctrl devices in pci_scan_device() to make it more symmetric with pci_pwrctrl_unregister() and make pwrctrl devices for PCI bridges possible (Manivannan Sadhasivam) - Unregister pwrctrl devices in pci_destroy_dev() so DOE, ASPM, etc. can still access devices after pci_stop_dev() (Manivannan Sadhasivam) - If there's a pwrctrl device for a PCI device, skip scanning it because the pwrctrl core will rescan the bus after the device is powered on (Manivannan Sadhasivam) - Add a pwrctrl driver for PCI slots based on voltage regulators described via devicetree (Manivannan Sadhasivam) Bandwidth control: - Add set_pcie_speed.sh to TEST_PROGS to fix issue when executing the set_pcie_cooling_state.sh test case (Yi Lai) - Avoid a NULL pointer dereference when we run out of bus numbers to assign for a bridge secondary bus (Lukas Wunner) Hotplug: - Drop superfluous pci_hotplug_slot_list, try_module_get() calls, and NULL pointer checks (Lukas Wunner) - Drop shpchp module init/exit logging, replace shpchp dbg() with ctrl_dbg(), and remove unused dbg(), err(), info(), warn() wrappers (Ilpo Järvinen) - Drop 'shpchp_debug' module parameter in favor of standard dynamic debugging (Ilpo Järvinen) - Drop unused cpcihp .get_power(), .set_power() function pointers (Guilherme Giacomo Simoes) - Disable hotplug interrupts in portdrv only when pciehp is not enabled to avoid issuing two hotplug commands too close together (Feng Tang) - Skip pciehp 'device replaced' check if the device has been removed to address a deadlock when resuming after a device was removed during system sleep (Lukas Wunner) - Don't enable pciehp hotplug interupt when resuming in poll mode (Ilpo Järvinen) Virtualization: - Fix bugs in 'pci=config_acs=' kernel command line parameter (Tushar Dave) DOE: - Expose supported DOE features via sysfs (Alistair Francis) - Allow DOE support to be enabled even if CXL isn't enabled (Alistair Francis) Endpoint framework: - Convert PCI device data so pci-epf-test works correctly on big-endian endpoint systems (Niklas Cassel) - Add BAR_RESIZABLE type to endpoint framework and add DWC core support for EPF drivers to set BAR_RESIZABLE type and size (Niklas Cassel) - Fix pci-epf-test double free that causes an oops if the host reboots and PERST# deassertion restarts endpoint BAR allocation (Christian Bruel) - Fix endpoint BAR testing so tests can skip disabled BARs instead of reporting them as failures (Niklas Cassel) - Widen endpoint test BAR size variable to accommodate BARs larger than INT_MAX (Niklas Cassel) - Remove unused tools 'pci' build target left over after moving tests to tools/testing/selftests/pci_endpoint (Jianfeng Liu) Altera PCIe controller driver: - Add DT binding and driver support for Agilex family (P-Tile, F-Tile, R-Tile) (Matthew Gerlach and D M, Sharath Kumar) AMD MDB PCIe controller driver: - Add DT binding and driver for AMD MDB (Multimedia DMA Bridge) (Thippeswamy Havalige) Broadcom STB PCIe controller driver: - Add BCM2712 MSI-X DT binding and interrupt controller drivers and add softdep on irq_bcm2712_mip driver to ensure that it is loaded first (Stanimir Varbanov) - Expand inbound window map to 64GB so it can accommodate BCM2712 (Stanimir Varbanov) - Add BCM2712 support and DT updates (Stanimir Varbanov) - Apply link speed restriction before bringing link up, not after (Jim Quinlan) - Update Max Link Speed in Link Capabilities via the internal writable register, not the read-only config register (Jim Quinlan) - Handle regulator_bulk_get() error to avoid panic when we call regulator_bulk_free() later (Jim Quinlan) - Disable regulators only when removing the bus immediately below a Root Port because we don't support regulators deeper in the hierarchy (Jim Quinlan) - Make const read-only arrays static (Colin Ian King) Cadence PCIe endpoint driver: - Correct MSG TLP generation so endpoints can generate INTx messages (Hans Zhang) Freescale i.MX6 PCIe controller driver: - Identify the second controller on i.MX8MQ based on devicetree 'linux,pci-domain' instead of DBI 'reg' address (Richard Zhu) - Remove imx_pcie_cpu_addr_fixup() since dwc core can now derive the ATU input address (using parent_bus_offset) from devicetree (Frank Li) Freescale Layerscape PCIe controller driver: - Drop deprecated 'num-ib-windows' and 'num-ob-windows' and unnecessary 'status' from example (Krzysztof Kozlowski) - Correct the syscon_regmap_lookup_by_phandle_args("fsl,pcie-scfg") arg_count to fix probe failure on LS1043A (Ioana Ciornei) HiSilicon STB PCIe controller driver: - Call phy_exit() to clean up if histb_pcie_probe() fails (Christophe JAILLET) Intel Gateway PCIe controller driver: - Remove intel_pcie_cpu_addr() since dwc core can now derive the ATU input address (using parent_bus_offset) from devicetree (Frank Li) Intel VMD host bridge driver: - Convert vmd_dev.cfg_lock from spinlock_t to raw_spinlock_t so pci_ops.read() will never sleep, even on PREEMPT_RT where spinlock_t becomes a sleepable lock, to avoid calling a sleeping function from invalid context (Ryo Takakura) MediaTek PCIe Gen3 controller driver: - Remove leftover mac_reset assert for Airoha EN7581 SoC (Lorenzo Bianconi) - Add EN7581 PBUS controller 'mediatek,pbus-csr' DT property and program host bridge memory aperture to this syscon node (Lorenzo Bianconi) Qualcomm PCIe controller driver: - Add qcom,pcie-ipq5332 binding (Varadarajan Narayanan) - Add qcom i.MX8QM and i.MX8QXP/DXP optional DMA interrupt (Alexander Stein) - Add optional dma-coherent DT property for Qualcomm SA8775P (Dmitry Baryshkov) - Make DT iommu property required for SA8775P and prohibited for SDX55 (Dmitry Baryshkov) - Add DT IOMMU and DMA-related properties for Qualcomm SM8450 (Dmitry Baryshkov) - Add endpoint DT properties for SAR2130P and enable endpoint mode in driver (Dmitry Baryshkov) - Describe endpoint BAR0 and BAR2 as 64-bit only and BAR1 and BAR3 as RESERVED (Manivannan Sadhasivam) Rockchip DesignWare PCIe controller driver: - Describe rk3568 and rk3588 BARs as Resizable, not Fixed (Niklas Cassel) Synopsys DesignWare PCIe controller driver: - Add debugfs-based Silicon Debug, Error Injection, Statistical Counter support for DWC (Shradha Todi) - Add debugfs property to expose LTSSM status of DWC PCIe link (Hans Zhang) - Add Rockchip support for DWC debugfs features (Niklas Cassel) - Add dw_pcie_parent_bus_offset() to look up the parent bus address of a specified 'reg' property and return the offset from the CPU physical address (Frank Li) - Use dw_pcie_parent_bus_offset() to derive CPU -> ATU addr offset via 'reg[config]' for host controllers and 'reg[addr_space]' for endpoint controllers (Frank Li) - Apply struct dw_pcie.parent_bus_offset in ATU users to remove use of .cpu_addr_fixup() when programming ATU (Frank Li) TI J721E PCIe driver: - Correct the 'link down' interrupt bit for J784S4 (Siddharth Vadapalli) TI Keystone PCIe controller driver: - Describe AM65x BARs 2 and 5 as Resizable (not Fixed) and reduce alignment requirement from 1MB to 64KB (Niklas Cassel) Xilinx Versal CPM PCIe controller driver: - Free IRQ domain in probe error path to avoid leaking it (Thippeswamy Havalige) - Add DT .compatible "xlnx,versal-cpm5nc-host" and driver support for Versal Net CPM5NC Root Port controller (Thippeswamy Havalige) - Add driver support for CPM5_HOST1 (Thippeswamy Havalige) Miscellaneous: - Convert fsl,mpc83xx-pcie binding to YAML (J. Neuschäfer) - Use for_each_available_child_of_node_scoped() to simplify apple, kirin, mediatek, mt7621, tegra drivers (Zhang Zekun)" * tag 'pci-v6.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (197 commits) PCI: layerscape: Fix arg_count to syscon_regmap_lookup_by_phandle_args() PCI: j721e: Fix the value of .linkdown_irq_regfield for J784S4 misc: pci_endpoint_test: Add support for PCITEST_IRQ_TYPE_AUTO PCI: endpoint: pci-epf-test: Expose supported IRQ types in CAPS register PCI: dw-rockchip: Endpoint mode cannot raise INTx interrupts PCI: endpoint: Add intx_capable to epc_features struct dt-bindings: PCI: Add common schema for devices accessible through PCI BARs PCI: intel-gw: Remove intel_pcie_cpu_addr() PCI: imx6: Remove imx_pcie_cpu_addr_fixup() PCI: dwc: Use parent_bus_offset to remove need for .cpu_addr_fixup() PCI: dwc: ep: Ensure proper iteration over outbound map windows PCI: dwc: ep: Use devicetree 'reg[addr_space]' to derive CPU -> ATU addr offset PCI: dwc: ep: Consolidate devicetree handling in dw_pcie_ep_get_resources() PCI: dwc: ep: Call epc_create() early in dw_pcie_ep_init() PCI: dwc: Use devicetree 'reg[config]' to derive CPU -> ATU addr offset PCI: dwc: Add dw_pcie_parent_bus_offset() checking and debug PCI: dwc: Add dw_pcie_parent_bus_offset() PCI/bwctrl: Fix NULL pointer dereference on bus number exhaustion PCI: xilinx-cpm: Add cpm_csr register mapping for CPM5_HOST1 variant PCI: brcmstb: Make const read-only arrays static ...

Merge branch 'pci/controller/dwc'

2025-03-27T18:14:49+00:00

- Move struct dwc_pcie_vsec_id to include/linux/pcie-dwc.h, where it can be shared by debugfs, perf, sysfs, etc (Manivannan Sadhasivam) - Add dw_pcie_find_vsec_capability() to locate Vendor Specific Extended Capabilities (Shradha Todi) - Add debugfs-based Silicon Debug, Error Injection, Statistical Counter support for DWC (Shradha Todi) - Add debugfs property to expose LTSSM status of DWC PCIe link (Hans Zhang) - Add Rockchip Vendor ID and Vendor Specific ID of RAS DES Capability so the DWC debugfs features work for Rockchip as well (Niklas Cassel) * pci/controller/dwc: PCI: dw-rockchip: Hide broken ATS capability for RK3588 running in EP mode PCI: dwc: ep: Add dw_pcie_ep_hide_ext_capability() PCI: dwc: ep: Return -ENOMEM for allocation failures PCI: dwc: Add Rockchip to the RAS DES allowed vendor list PCI: Add Rockchip Vendor ID PCI: dwc: Add debugfs property to provide LTSSM status of the PCIe link PCI: dwc: Add debugfs based Statistical Counter support for DWC PCI: dwc: Add debugfs based Error Injection support for DWC PCI: dwc: Add debugfs based Silicon Debug support for DWC PCI: dwc: Add helper to find the Vendor Specific Extended Capability (VSEC) perf/dwc_pcie: Move common DWC struct definitions to 'pcie-dwc.h'

Merge tag 'hwmon-for-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

2025-03-26T02:55:29+00:00

Pull hwmon updates from Guenter Roeck: "New drivers: - Driver for HTU31 - Congatec Board Controller monitoring driver - Driver for TI INA233 Current and Power Monitor Support for additional chips or boards in existing drivers: - pmbus/ltc2978: Add support for LT717x and LTM4673 - asus-ec-sensors: Add PRIME X670E-PRO WIFI - k10temp: Add support for cyan skillfish - nct6683: Add customer ID for AMD BC-250 - lm90: Add support for NCT7716, NCT7717 and NCT7718 Other notable improvements in existing drivers: - emc2305: Add devicetree support, and use devm_thermal_of_cooling_device_register - acpi_power_meter: Convert to with_info API - dell-smm: Increase the number of fans - pmbus/core: Optimize debugfs support and use i2c_client debugfs directory - hwmon core: Fix the missing of 'average' word in hwmon_power_attr_templates - Various drivers: Use per-client debugfs entry provided by I2C subsystem" * tag 'hwmon-for-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (49 commits) hwmon: emc2305: Use devm_thermal_of_cooling_device_register hwmon: emc2305: Add OF support dt-bindings: hwmon: Add Microchip emc2305 support dt-bindings: hwmon: Drop stray blank line in the header hwmon: (acpi_power_meter) Replace the deprecated hwmon_device_register hwmon: add driver for HTU31 dt-bindings: hwmon: Add description for sensor HTU31 hwmon: Add driver for TI INA233 Current and Power Monitor dt-bindings: hwmon: ti,ina2xx: Add INA233 device hwmon: Add Congatec Board Controller monitoring driver hwmon: (pmbus/ltc2978) add support for lt717x dt-bindings: hwmon: ltc2978: add support for LT717x hwmon: (pmbus/ltc2978) Add support for LT717x - docs hwmon: (dell-smm) Increment the number of fans hwmon: (ntc_thermistor) return error instead of clipping on OOB hwmon: (pt5161l) Use per-client debugfs entry hwmon: Fix the missing of 'average' word in hwmon_power_attr_templates hwmon: (acpi_power_meter) Fix the fake power alarm reporting hwmon: (gpio-fan) Add missing mutex locks dt-bindings: hwmon: gpio-fan: Add optional regulator support ...

s390/pci: Support mmap() of PCI resources except for ISM devices

2025-03-21T19:54:16+00:00

So far s390 does not allow mmap() of PCI resources to user-space via the usual mechanisms, though it does use it for RDMA. For the PCI sysfs resource files and /proc/bus/pci it defines neither HAVE_PCI_MMAP nor ARCH_GENERIC_PCI_MMAP_RESOURCE. For vfio-pci s390 previously relied on disabled VFIO_PCI_MMAP and now relies on setting pdev->non_mappable_bars for all devices. This is partly because access to mapped PCI resources from user-space requires special PCI load/store memory-I/O (MIO) instructions, or the special MMIO syscalls when these are not available. Still, such access is possible and useful not just for RDMA, in fact not being able to mmap() PCI resources has previously caused extra work when testing devices. One thing that doesn't work with PCI resources mapped to user-space though is the s390 specific virtual ISM device. Not only because the BAR size of 256 TiB prevents mapping the whole BAR but also because access requires use of the legacy PCI instructions which are not accessible to user-space on systems with the newer MIO PCI instructions. Now with the pdev->non_mappable_bars flag ISM can be excluded from mapping its resources while making this functionality available for all other PCI devices. To this end introduce a minimal implementation of PCI_QUIRKS and use that to set pdev->non_mappable_bars for ISM devices only. Then also set ARCH_GENERIC_PCI_MMAP_RESOURCE to take advantage of the generic implementation of pci_mmap_resource_range() enabling only the newer sysfs mmap() interface. This follows the recommendation in Documentation/PCI/sysfs-pci.rst. Link: https://lore.kernel.org/r/20250226-vfio_pci_mmap-v7-3-c5c0f1d26efd@linux.ibm.com Signed-off-by: Niklas Schnelle Signed-off-by: Bjorn Helgaas